9,733 research outputs found
Solid flow drives surface nanopatterning by ion-beam irradiation
Ion Beam Sputtering (IBS) is known to produce surface nanopatterns over
macroscopic areas on a wide range of materials. However, in spite of the
technological potential of this route to nanostructuring, the physical process
by which these surfaces self-organize remains poorly under- stood. We have
performed detailed experiments of IBS on Si substrates that validate dynamical
and morphological predictions from a hydrodynamic description of the
phenomenon. Our results elucidate flow of a nanoscopically thin and highly
viscous surface layer, driven by the stress created by the ion-beam, as a
description of the system. This type of slow relaxation is akin to flow of
macroscopic solids like glaciers or lead pipes, that is driven by defect
dynamics.Comment: 12 pages, 4 figure
Examples of signature (2,2) manifolds with commuting curvature operators
We exhibit Walker manifolds of signature (2,2) with various commutativity
properties for the Ricci operator, the skew-symmetric curvature operator, and
the Jacobi operator. If the Walker metric is a Riemannian extension of an
underlying affine structure A, these properties are related to the Ricci tensor
of A
The inhomogeneous evolution of subgraphs and cycles in complex networks
Subgraphs and cycles are often used to characterize the local properties of
complex networks. Here we show that the subgraph structure of real networks is
highly time dependent: as the network grows, the density of some subgraphs
remains unchanged, while the density of others increase at a rate that is
determined by the network's degree distribution and clustering properties. This
inhomogeneous evolution process, supported by direct measurements on several
real networks, leads to systematic shifts in the overall subgraph spectrum and
to an inevitable overrepresentation of some subgraphs and cycles.Comment: 4 pages, 4 figures, submitted to Phys. Rev.
Structural analysis and sintering aids effects in La2Ce2O7 proton conductors
Global warming is an important problem that has to be solved without delay. The development of environmental-friendly energy technology is needed to deal with this issue. Solid Oxide Fuel Cells (SOFC) technology has been proposed as a real alternative to fossil fuel combustion. Proton conductors like La2Ce2O7 (LDC), has several advantages in comparison with BaCeO3 due to its high stability in H2O or CO2 conditions [1]. Furthermore, for industry application is necessary to low the high sintering temperature of typical electrolyte materials.
La2Ce2O7 was synthesized by the freeze-drying precursor method and calcination conditions have been optimized to obtain single phase with high compaction at 1400 ÂşC for 1h. A fully characterization has been carried out using X-ray powder diffraction and scanning electron microscopy. The total conductivity was determined by complex impedance spectroscopy in dry and wet air. Transmission Electron Microscopy (TEM) was used to clarify certainly the structure of La2Ce2O7 due to its still unknown. SAEDs patterns revealed a disordered fluorite, not appearing secondary reflections typical of pyrochlore superstructure, finishing the controversy around the correct structure in this material [2,3].
Moreover, an exhaustive study about lowering the sintering temperature with Co and Zn as sintering aids has been investigated obtaining electrolytes that can be used for SOFC. The sintering aids were impregnated using cobalt and zinc nitrates in ethanol media. Both sintering aids allow for obtain high dense pellets lowering the sintering temperature 300 ÂşC and 400 ÂşC for samples with cobalt and zinc, respectively, without compromising the electrical and microstructural properties (Fig 1).Universidad de Málaga. Campus de Excelencia Internacional AndalucĂa Tec
Effect of preparation conditions on the polymorphism and transport properties of lanthanum molybdates
In this work, La6MoO12-based compounds were investigated as part of a new family of materials very competitive as hydrogen separation membranes [1,2].
La5.4MoO11.1 was synthesized by the freeze-drying precursor method and the calcination conditions were optimized in order to obtain single phases. Several cooling rates were applied and different polymorphs were obtained: a simple cubic fluorite symmetry (Fm-3m) for the sample cooled by quenching, and two different rhombohedral (R-3) space groups for the samples cooled at 50 ºC•min-1 and 0.5 ºC•min-1 (see Figure below). For the quenched sample, the Rietveld refinement was satisfactory in a Fm-3m space group. For the other two compositions no structural model was available and were indexed in a R-3 space group, however some small reflections were not given any intensity by the model used. Transmission electron microscopy confirmed the presence of superstructures for those samples. All ceramic materials were obtained with relative densities close to 100% after sintering at 1500 ºC. Stability studies demonstrated that all three polymorphs were stable in oxidizing and reducing conditions at 800 ºC for 48 hours.
The three samples present a significant proton contribution to the conductivity at temperatures lower than 800 ÂşC. These results were confirmed by thermogravimetric analysis. The highest conductivity values were observed for the samples prepared by quenching. The three polymorphs display a small p-type electronic contribution to the overall conductivity in oxidizing conditions and n-type electronic one in very reducing conditions, much more significant for the samples cooled by quenching and at 50 ÂşC•min-1.Universidad de Málaga. Campus de Excelencia Internacional AndalucĂa Tech
Three-dimensional numerical simulation of 1GeV/Nucleon U92+ impact against atomic hydrogen
The impact of 1GeV/Nucleon U92+ projectiles against atomic hydrogen is
studied by direct numerical resolution of the time-dependent wave equation for
the atomic electron on a three-dimensional Cartesian lattice. We employ the
fully relativistic expressions to describe the electromagnetic fields created
by the incident ion. The wave equation for the atom interacting with the
projectile is carefully derived from the time-dependent Dirac equation in order
to retain all the relevant terms.Comment: 12 pages and 7 figures included in the tex
- …