Modification of trigonometric collocation method for impulsive periodic BVP

AbstractThe paper gives an easy-to-use technique for setting up the system of determining equations of impulsive periodic BVPs. © 1999 Elsevier Science Ltd. All rights reserved

Versatile multipass cell for laser spectroscopic trace gas analysis

The design, construction and characterization of a novel circular multipass cell for sensitive trace gas analysis are presented. This cell allows for easy modification of the optical path length without any changes of its physical parameters. Furthermore, it is suited for three different detection techniques: direct absorption, wavelength modulation and photoacoustics. To demonstrate its performance, mixing ratios of 13CO2 and N2O were measured from ambient air, using a quantum cascade laser. With the direct absorption method, noise equivalent 1-s precisions of 2.7ppb and 0.2ppb are achieved for 13CO2 and N2O, respectively. The wavelength modulation technique resulted in 4.3ppb precision with 1-s averaging for the 13CO2 measurements. AQ-factor of 190 and a normalized noise equivalent minimum absorption of 1.3×10−8cm−1 W Hz−1/2 are achieved using the photoacoustic techniqu

Continuous isotopic composition measurements of tropospheric CO₂ at Jungfraujoch (3580 m a.s.l.), Switzerland: real-time observation of regional pollution events

A quantum cascade laser based absorption spectrometer (QCLAS) is applied for the first time to perform in situ, continuous and high precision isotope ratio measurements of CO₂ in the free troposphere. Time series of the three main CO₂ isotopologue mixing ratios (¹²C¹⁶CO₂, ¹³C¹⁶CO₂ and ¹²C¹⁸O¹⁶O) have simultaneously been measured at one second time resolution over two years (from August 2008 to present) at the High Altitude Research Station Jungfraujoch (3580 m a.s.l., Switzerland). This work focuses on periods in February 2009 only, when sudden and pronounced enhancements in the tropospheric CO₂ were observed. These short-term changes were closely correlated with variations in CO mixing ratios measured at the same site, indicating combustion related emissions as potential source. The analytical precision of 0.046‰ (at 50 s integration time) for both δ¹³C and δ¹⁸O and the high temporal resolution allowed the application of the Keeling plot method for source signature identification. The spatial origin of these CO₂ emission sources was then determined by backward Lagrangian particle dispersion simulations

High precision and continuous field measurements of δ 13C and δ 18O in carbon dioxide with a cryogen-free QCLAS

The present paper describes a compact and cryogen-free, quantum cascade laser based absorption spectrometer (QCLAS) designed for in situ, continuous and high precision isotope ratio measurements of atmospheric CO2. The mobile instrument incorporates several new features including a novel astigmatic multi-pass cell assembly, a quasi-room temperature quantum cascade laser, thermoelectrically cooled detectors as well as a new retrieval approach. The combination of these features now makes it possible to measure isotope ratios of ambient CO2 with a precision of 0.03 and 0.05‰ for δ13C and δ18O, respectively, using a 100s integration time. A robust and optimized calibration procedure was developed to bring the retrieved isotope ratios on an absolute scale. This assures an accuracy better than 0.1‰ under laboratory conditions. The instrument performance was also assessed in a field campaign in which the spectrometer operated autonomously and provided mixing ratio values for the main three CO2 isotopologues at one second time resolution. An accuracy of 0.2‰ was routinely obtained for both isotope ratios during the entire period. The results were in excellent agreement with the standard laboratory-based isotope ratio mass spectrometer measurements made on field-collected flask samples. A few illustrative examples are used to depict the potential of this optical method in atmosphere-biosphere researc

Breath acetone as a marker of energy balance: an exploratory study in healthy humans.

An exploratory study was performed on eight healthy volunteers to assess how short-term changes in energy balance and dietary carbohydrate content impact breath acetone concentrations. Participants were studied on three occasions: on each occasion, they remained fasted and in resting conditions during the first 2 h to assess basal breath acetone and blood beta-hydroxybutyrate (BOHB). During the next 6 h, they remained fasted on one occasion (F), or were fed hourly high carbohydrate (HC) or low-carbohydrate (LC) meals to induce a positive energy balance on the other two occasions. They remained in resting conditions during 4 h, then performed a 2-hour low intensity exercise (25 W) inducing a negative energy balance. In resting conditions, breath acetone and blood BOHB concentrations increased progressively compared to basal values in F, but decreased and remained low throughout the test in HC. With LC, breath acetone increased progressively, while blood BOHB decreased. This exploratory study indicates that breath acetone reliably detects a stimulation of ketogenesis during a short-term fast. It also suggests that LC and HC differentially impact BOHB and acetone production and utilization, and reveals possible limitations to the use of breath acetone as a marker of energy balance

Real-time analysis of δ13C- and δD-CH4 in ambient air with laser spectroscopy:method development and first intercomparison results

In situ and simultaneous measurement of the three most abundant isotopologues of methane using mid-infrared laser absorption spectroscopy is demonstrated. A field-deployable, autonomous platform is realized by coupling a compact quantum cascade laser absorption spectrometer (QCLAS) to a preconcentration unit, called trace gas extractor (TREX). This unit enhances CH4 mole fractions by a factor of up to 500 above ambient levels and quantitatively separates interfering trace gases such as N2O and CO2. The analytical precision of the QCLAS isotope measurement on the preconcentrated (750 ppm, parts-per-million, µmole mole−1) methane is 0.1 and 0.5 ‰ for δ13C- and δD-CH4 at 10 min averaging time. Based on repeated measurements of compressed air during a 2-week intercomparison campaign, the repeatability of the TREX–QCLAS was determined to be 0.19 and 1.9 ‰ for δ13C and δD-CH4, respectively. In this intercomparison campaign the new in situ technique is compared to isotope-ratio mass spectrometry (IRMS) based on glass flask and bag sampling and real time CH4 isotope analysis by two commercially available laser spectrometers. Both laser-based analyzers were limited to methane mole fraction and δ13C-CH4 analysis, and only one of them, a cavity ring down spectrometer, was capable to deliver meaningful data for the isotopic composition. After correcting for scale offsets, the average difference between TREX–QCLAS data and bag/flask sampling–IRMS values are within the extended WMO compatibility goals of 0.2 and 5 ‰ for δ13C- and δD-CH4, respectively. This also displays the potential to improve the interlaboratory compatibility based on the analysis of a reference air sample with accurately determined isotopic composition

An Efficient and Compact Difference-Frequency-Generation Spectrometer and Its Application to 12CH3D/12CH4 Isotope Ratio Measurements

We have developed an efficient and compact 3.4 μm difference-frequency-generation spectrometer using a 1.55 μm distributed feedback (DFB) laser diode, a 1.06 μm DFB laser diode, and a ridge-waveguide periodically poled lithium niobate. It is continuously tunable in the 30 cm−1 span and is applied to 12CH3D/12CH4 isotope ratio measurements. The suitable pair of 12CH3D ν4 pP(7,6) and 12CH4 ν 2+ν4 R(6) F1(1) lines enabled us to determine their isotope ratio with a precision repeatability of 0.8‰ using a sample and a working standard of pure methane with an effective signal averaging time of 100 ms