507 research outputs found
Plant communities of the upper Murrumbidgee catchment in New South Wales and the Australian Capital Territory
Native vegetation of the upper Murrumbidgee catchment in southeast NSW and the Australian Capital-Territory (ACT) was classified into 75 plant communities across 18 NSW Vegetation Classes within nine Structural-Formations. Plant communities were derived through numerical analysis of 4,106 field survey plots including 3,787-plots from 58 existing survey datasets and 319 new plots, which were sampled in under surveyed ecosystems. All plant-communities are described at a level appropriate for discrimination of threatened ecological communities and distinct-vegetation mapping units.
The classification describes plant communities in the context of the upper Murrumbidgee catchment and surrounding-landscapes of similar ecological character. It incorporates and, in some instances, refines identification of plant-communities described in previous classifications of alpine vegetation, forest ecosystems, woodlands and grasslands-across the Australian Alps and South Eastern Highlands within the upper Murrumbidgee catchment. Altitude,-precipitation, soil saturation, lithology, slope, aspect and landscape position were all important factors in guiding-plant community associations.
Nine Threatened Ecological Communities under Commonwealth, NSW and ACT legislation occur in the upper-Murrumbidgee catchment. This study has also identified five additional plant communities which are highly restricted-in distribution and may require active management or protection to ensure their survival
Recommended from our members
A fieldable instrument for waterborne radionuclide detection
In monitoring effluent leaving its sites, US DOE assays for alpha- emitting radionuclides (U, transuranics) to ensure compliance with regulatory limits. Because alpha emissions can only by detected over a short range in water ({approximately}40{mu}m), the conventional approach is to collect samples for processing in a central laboratory; a time-consuming and cost procedure ensues to separate and measure the radionuclides. Because of the sporadic nature of sampling processes, there is the possibility that a release may go undetected. We are addressing this issue by a developing a real-time, field- deployable instrument which incorporates a proprietary film that selectively binds radionuclides from dilute aqueous samples. By combining the film with an appropriate alpha spectrometer, we have developed a fieldable system that can operate as an autonomous monitor in a batch or continuous manner. Laboratory results to date have been encouraging. Positive identification of U and Pu has been made by resolving the energy spectrum of emitted alphas. Sensitivity for U is at the 10 part per trillion level (15 femtocuries per liter)
Water vapor measurements by Raman lidar during the ARM 1997 Water Vapor Intensive Observation Period
Water vapor is the most important greenhouse gas in the atmosphere, as it is the most active infrared absorber and emitter of radiation, and it also plays an important role in energy transport and cloud formation. Accurate, high resolution measurements of this variable are critical in order to improve the understanding of these processes and thus their ability to model them. Because of the importance of water vapor, the Department of Energy`s Atmospheric Radiation Measurement (ARM) program initiated a series of three intensive operating periods (IOPs) at its Cloud and Radiation Testbed (CART) site in northern Oklahoma. The goal of these IOPs is to improve and validate the state-of-the-art capabilities in measuring water vapor. To date, two of the planned three IOPs have occurred: the first was in September of 1996, with an emphasis on the lowest kilometer, while the second was conducted from September--October 1997 with a focus on both the upper troposphere and lowest kilometer. The ARM CART site is the home of several different water vapor measurement systems. These systems include a Raman lidar, a microwave radiometer, a radiosonde launch site, and an instrumented tower. During these IOPs, additional instrumentation was brought to the site to augment the normal measurements in the attempt to characterize the CART instruments and to address the need to improve water vapor measurement capabilities. Some of the instruments brought to the CART site include a scanning Raman lidar system from NASA/GSFC, additional microwave radiometers from NOAA/ETL, a chilled mirror that was flown on a tethersonde and kite system, and dewpoint hygrometer instruments flow on the North Dakota Citation. This paper will focus on the Raman lidar intercomparisons from the second IOP
Predicting the effect of radiation damage on dark current in a space-qualified high performance CMOS image sensor
The CIS115 is a Teledyne-e2v CMOS image sensor with 1504 Ă 2000 pixels of 7 ÎŒm pitch. It has a high optical quantum efficiency owing to a multi-layer anti-reflective coating and its backside illuminated construction, and low dark current due to its pinned photodiode 4T pixel architecture. The sensor operates in rolling shutter mode with a frame rate of up to 7.5 fps (if using the whole array), and has a low readout noise of ~5 electrons rms. The CIS115 has been selected for use within the JANUS instrument, which is a high resolution camera due to launch on board ESA's JUpiter ICy moons Explorer (JUICE) spacecraft in 2022. After an interplanetary transit time of over 7 years, JUICE will spend 3.5 years touring the Jovian system, studying three of the Galilean moons in particular: Ganymede, Callisto and Europa. During this latter part of the mission, the spacecraft and hence the CIS115 sensor will be subjected to the significant levels of trapped radiation surrounding Jupiter. Gamma and proton irradiation campaigns have therefore been undertaken in order to evaluate both ionising and non-ionising dose effects on the CIS115's dark current performance. Characterisations were carried out at expected mission operating temperatures (â35 ± 10oC) both prior to and post-irradiation. Models of the resulting degradation in dark current behaviour will be combined with expected doses during the JUICE mission in order to predict the performance of the CIS115 at the mission end-of-lif
Recommended from our members
CART and GSFC Raman lidar measurements of atmospheric aerosol backscattering and extinction profiles for EOS validation and ARM radiation studies
The aerosol retrieval algorithms used by the Moderate-Resolution Imaging Spectroradiometer (MODIS) and Multi-Angle Imaging SpectroRadiometer (MISR) sensors on the Earth Observing Satellite (EOS) AM-1 platform operate by comparing measured radiances with tabulated radiances that have been computed for specific aerosol models. These aerosol models are based almost entirely on surface and/or column averaged measurements and so may not accurately represent the ambient aerosol properties. Therefore, to validate these EOS algorithms and to determine the effects of aerosols on the clear-sky radiative flux, the authors have begun to evaluate the vertical variability of ambient aerosol properties using the aerosol backscattering and extinction profiles measured by the Cloud and Radiation Testbed (CART) and NASA Goddard Space Flight Center (GSFC) Raman Lidars. Using the procedures developed for the GSFC Scanning Raman Lidar (SRL), the authors have developed and have begun to implement algorithms for the CART Raman Lidar to routinely provide profiles of aerosol extinction and backscattering during both nighttime and daytime operations. Aerosol backscattering and extinction profiles are computed for both lidar systems using data acquired during the 1996 and 1997 Water Vapor Intensive Operating Periods (IOPs). By integrating these aerosol extinction profiles, they derive measurements of aerosol optical thickness and compare these with coincident sun photometer measurements. They also use these measurements to measure the aerosol extinction/backscatter ratio S{sub a} (i.e. lidar ratio). Furthermore, they use the simultaneous water vapor measurements acquired by these Raman lidars to investigate the effects of water vapor on aerosol optical properties
Who do we inform? The role of status and target in intergroup whistle-blowing
In two experiments (n = 87 and n = 90), we showed that strongly identifying members of a low status group are more likely to actively inform the ingroup rather than the outgroup about an outgroup transgression, and consider it as more loyal to the ingroup to do so. Moreover, strongly identifying members of a high status group are more likely to actively inform the outgroup rather than the ingroup about an outgroup transgression, and consider this to be more loyal to the ingroup. The results are in support of the notion that, depending on a group's existing status position, negative outgroup information can be used to enhance or confirm the ingroup's standing, affecting whether the ingroup or the outgroup will initially be informed about an outgroup transgression. Copyright © The Author(s), 2009
Aquatic food security:insights into challenges and solutions from an analysis of interactions between fisheries, aquaculture, food safety, human health, fish and human welfare, economy and environment
Fisheries and aquaculture production, imports, exports and equitability of distribution determine the supply of aquatic food to people. Aquatic food security is achieved when a food supply is sufficient, safe, sustainable, shockproof and sound: sufficient, to meet needs and preferences of people; safe, to provide nutritional benefit while posing minimal health risks; sustainable, to provide food now and for future generations; shock-proof, to provide resilience to shocks in production systems and supply chains; and sound, to meet legal and ethical standards for welfare of animals, people and environment. Here, we present an integrated assessment of these elements of the aquatic food system in the United Kingdom, a system linked to dynamic global networks of producers, processors and markets. Our assessment addresses sufficiency of supply from aquaculture, fisheries and trade; safety of supply given biological, chemical and radiation hazards; social, economic and environmental sustainability of production systems and supply chains; system resilience to social, economic and environmental shocks; welfare of fish, people and environment; and the authenticity of food. Conventionally, these aspects of the food system are not assessed collectively, so information supporting our assessment is widely dispersed. Our assessment reveals trade-offs and challenges in the food system that are easily overlooked in sectoral analyses of fisheries, aquaculture, health, medicine, human and fish welfare, safety and environment. We highlight potential benefits of an integrated, systematic and ongoing process to assess security of the aquatic food system and to predict impacts of social, economic and environmental change on food supply and demand
Deviation From \Lambda CDM With Cosmic Strings Networks
In this work, we consider a network of cosmic strings to explain possible
deviation from \Lambda CDM behaviour. We use different observational data to
constrain the model and show that a small but non zero contribution from the
string network is allowed by the observational data which can result in a
reasonable departure from \Lambda CDM evolution. But by calculating the
Bayesian Evidence, we show that the present data still strongly favour the
concordance \Lambda CDM model irrespective of the choice of the prior.Comment: 15 Pages, Latex Style, 4 eps figures, Revised Version, Accepted for
publication in European Physical Journal
A research agenda for seed-trait functional ecology
Trait-based approaches have improved our understanding of plant evolution, community assembly and ecosystem functioning. A major challenge for the upcoming decades is to understand the functions and evolution of early life-history traits, across levels of organization and ecological strategies. Although a variety of seed traits are critical for dispersal, persistence, germination timing and seedling establishment, only seed mass has been considered systematically. Here we suggest broadening the range of morphological, physiological and biochemical seed traits to add new understanding on plant niches, population dynamics and community assembly. The diversity of seed traits and functions provides an important challenge that will require international collaboration in three areas of research. First, we present a conceptual framework for a seed ecological spectrum that builds upon current understanding of plant niches. We then lay the foundation for a seed-trait functional network, the establishment of which will underpin and facilitate trait-based inferences. Finally, we anticipate novel insights and challenges associated with incorporating diverse seed traits into predictive evolutionary ecology, community ecology and applied ecology. If the community invests in standardized seed-trait collection and the implementation of rigorous databases, major strides can be made at this exciting frontier of functional ecology.Commonwealth Scientific and Industrial Research Organisation. Grant Number: Râ90470â0
The composition of the protosolar disk and the formation conditions for comets
Conditions in the protosolar nebula have left their mark in the composition
of cometary volatiles, thought to be some of the most pristine material in the
solar system. Cometary compositions represent the end point of processing that
began in the parent molecular cloud core and continued through the collapse of
that core to form the protosun and the solar nebula, and finally during the
evolution of the solar nebula itself as the cometary bodies were accreting.
Disentangling the effects of the various epochs on the final composition of a
comet is complicated. But comets are not the only source of information about
the solar nebula. Protostellar disks around young stars similar to the protosun
provide a way of investigating the evolution of disks similar to the solar
nebula while they are in the process of evolving to form their own solar
systems. In this way we can learn about the physical and chemical conditions
under which comets formed, and about the types of dynamical processing that
shaped the solar system we see today.
This paper summarizes some recent contributions to our understanding of both
cometary volatiles and the composition, structure and evolution of protostellar
disks.Comment: To appear in Space Science Reviews. The final publication is
available at Springer via http://dx.doi.org/10.1007/s11214-015-0167-
- âŠ