Design and Optimization of Printed Circuit Board Inductors for Wireless Power Transfer System

Wireless power transfer via inductive link is becoming a popular choice as an alternate powering scheme for biomedical sensor electronics. Spiral printed circuit board (PCB) inductors are gaining attractions for wireless power transfer applications due to their various advantages over conventional inductors such as low-cost, batch fabrication, durability, manufacturability on flexible substrates, etc. In this work, design of a multi-spiral stacked solenoidal inductor for biomedical application in 13.56 MHz band is presented. Proposed stacking method enhances the inductance density of the inductor for a given area. This paper reports an optimization technique for design and implementation of the PCB inductors. The proposed scheme shows higher inductance and better figure-of-merit values compared to PCB inductors reported in literature, which are desirable for wireless power transfer system. DOI: 10.4236/cs.2013.4203

An Inductive Link-Based Wireless Power Transfer System for Biomedical Applications

A wireless power transfer system using an inductive link has been demonstrated for implantable sensor applications. The system is composed of two primary blocks: an inductive power transfer unit and a backward data communication unit. The inductive link performs two functions: coupling the required power from a wireless power supply system enabling battery-less, long-term implant operation and providing a backward data transmission path. The backward data communication unit transmits the data to an outside reader using FSK modulation scheme via the inductive link. To demonstrate the operation of the inductive link, a board-level design has been implemented with high link efficiency. Test results from a fabricated sensor system, composed of a hybrid implementation of custom-integrated circuits and board-level discrete components, are presented demonstrating power transmission of 125 mW with a 12.5% power link transmission efficiency. Simultaneous backward data communication involving a digital pulse rate of up to 10 kbps was also observed

Ligand-Receptor Interactions

The formation and dissociation of specific noncovalent interactions between a variety of macromolecules play a crucial role in the function of biological systems. During the last few years, three main lines of research led to a dramatic improvement of our understanding of these important phenomena. First, combination of genetic engineering and X ray cristallography made available a simultaneous knowledg of the precise structure and affinity of series or related ligand-receptor systems differing by a few well-defined atoms. Second, improvement of computer power and simulation techniques allowed extended exploration of the interaction of realistic macromolecules. Third, simultaneous development of a variety of techniques based on atomic force microscopy, hydrodynamic flow, biomembrane probes, optical tweezers, magnetic fields or flexible transducers yielded direct experimental information of the behavior of single ligand receptor bonds. At the same time, investigation of well defined cellular models raised the interest of biologists to the kinetic and mechanical properties of cell membrane receptors. The aim of this review is to give a description of these advances that benefitted from a largely multidisciplinar approach

Socioeconomic determinants of organic cotton adoption in Benin, West Africa

Organic cotton relies on ecological processes and the use of natural resources to sustain the production system, unlike conventional cotton, mainly characterized by massive utilization of synthesis chemicals. In West Africa, where rural livelihoods are particularly vulnerable, organic cotton is expected to contribute not only to poverty reduction but also to strengthen households’ resilience. The objective of this study was to assess institutional and socioeconomic factors determining farmers’ decisions to adopt organic cotton. For this purpose, we applied a probit model on empirical data collected from producers of the Centre and the Northern parts of Benin. Overall, we found that organic cotton adoption is mainly determined by farmers’ socioeconomic characteristics, the physical distance between farm and house, and contact with extension and advisory services. Organic farming is more attractive to women compared to conventional farming. This because such type of cotton farming enables women to hold a separate cotton farm and thus increase their economic independence, whereas with the conventional system they depend mainly on the farm of the (male) head of the household. Older, less educated and low-income farmers who express environmental concern are more likely to adopt organic cotton. Subsequently, organic cotton should be considered as a prospective policy option to reach the poor and strengthen their livelihoods conditions while contributing to preserve the environment and natural resources. Furthermore, farmers who have their farm near home are more likely to adopt organic farming than those who have the farm far from their home. It also came out that organic farmers have more contacts with advisory and extension services. Finally, the study noted that there is still a need to enhance the extension system by: (1) exploring, designing, and upgrading innovative pedagogic tools such as videos and mobile phone technology to foster learning; and (2) strengthening organic farmer’s organizations and the linkage with agricultural research organizations for technology development

Complexes Formed in Solution Between Vanadium(IV)/(V) and the Cyclic Dihydroxamic Acid Putrebactin or Linear Suberodihydroxamic Acid

The ability of microbial siderophores to coordinate metal ions, particularly Fe(III), continues to generate interest in the poten-tial applications of these bioligands in the environment and medicine.13 Siderophores produced by terrestrial and marin

Cost-effectiveness of replacing versus discarding the nail in children with nail bed injury

Every year in the UK, around 10 000 children need to have operations to mend injuries to the bed of their fingernails. Currently, most children have their fingernail placed back on the injured nail bed after the operation. The NINJA trial found that children were slightly less likely to have an infection if the nail was thrown away rather than being put back, but the difference between groups was small and could have be due to chance. This study looked at whether replacing the nail is cost-effective compared with throwing it away. Using data from the NINJA trial, we compared costs, healthcare use, and quality of life and assessed the cost-effectiveness of replacing the nail. It was found that throwing the nail away after surgery would save the National Health Service (NHS) £75 (€85) per operation compared with placing the nail back on the nail bed. Changing clinical practice could save the NHS in England £720 000 (€819 000) per year

Effectiveness of nail bed repair in children with or without replacing the fingernail : NINJA multicentre randomized clinical trial

Background Surgery for nail bed injuries in children is common. One of the key surgical decisions is whether to replace the nail plate following nail bed repair. The aim of this RCT was to assess the clinical effectiveness and cost-effectiveness of nail bed repair with fingernail replacement/substitution compared with repair without fingernail replacement. Methods A two-arm 1 : 1 parallel-group open multicentre superiority RCT was performed across 20 secondary-care hospitals in the UK. The co-primary outcomes were surgical-site infection at around 7 days after surgery and cosmetic appearance summary score at a minimum of 4 months. Results Some 451 children presenting with a suspected nail bed injury were recruited between July 2018 and July 2019; 224 were allocated to the nail-discarded arm, and 227 to the nail-replaced arm. There was no difference in the number of surgical-site infections at around 7 days between the two interventions or in cosmetic appearance. The mean total healthcare cost over the 4 months after surgery was €84 (95 per cent c.i. 34 to 140) lower for the nail-discarded arm than the nail-replaced arm (P < 0.001). Conclusion After nail bed repair, discarding the fingernail was associated with similar rates of infection and cosmesis ratings as replacement of the finger nail, but was cost saving

Variational density-functional perturbation theory for dielectrics and lattice dynamics

The application of variational density functional perturbation theory (DFPT) to lattice dynamics and dielectric properties is discussed within the plane-wave pseudopotential formalism. We derive a method to calculate the linear response of the exchange-correlation potential in the GGA at arbitrary wavevector. We introduce an efficient self-consistent solver based on all-bands conjugate-gradient minimization of the second order energy, and compare the performance of preconditioning schemes. Lattice-dynamical and electronic structure consequences of space-group symmetry are described, particularly their use in reducing the computational effort required. We discuss the implementation in the CASTEP DFT modeling code, and how DFPT calculations may be efficiently performed on parallel computers. We present results on the lattice dynamics and dielectric properties of -quartz, the hydrogen bonded crystal NaHF2 and the liquid-crystal-forming molecule 5CB. Excellent agreement is found between theory and experiment within the GGA

Foward and reverse (retro) iron(III) or gallium (III) desferrioxamine E and ring-expanded analogues prepared using metal-templated synthesis from endo-hydroxamic acid monomers

A metal-templated synthesis (MTS) approach was used to preorganize the forward endo-hydroxamic acid monomer 4-[(5-aminopentyl)(hydroxy)amino]-4-oxobutanoic acid (for-PBH) about iron(III) in a 1:3 metal/ligand ratio to furnish the iron(III) siderophore for-[Fe(DFOE)] (ferrioxamine E) following peptide coupling. Substitution of for-PBH with the reverse (retro) hydroxamic acid analogue 3-(6-amino-N-hydroxyhexanamido)-propanoic acid (ret-PBH) furnished ret-[Fe(DFOE)] (ret-ferrioxamine E). As isomers, for-[Fe(DFOE)] and ret-[Fe(DFOE)] gave identical mass spectrometry signals ([M + H+]+, m/zcalc 654.3, m/zobs 654.3), yet for-[Fe(DFOE)] eluted in a more polar window (tR = 23.44 min) than ret-[Fe(DFOE)] (tR = 28.13 min) on a C18 reverse-phase high-performance liquid chromatography (RP-HPLC) column. for-[Ga(DFOE)] (tR = 22.99 min) and ret-[Ga(DFOE)] (tR = 28.11 min) were prepared using gallium(III) as the metal-ion template and showed the same trend for the retention time. Ring-expanded analogues of for-[Fe(DFOE)] and ret-[Fe(DFOE)] were prepared from endo-hydroxamic acid monomers with one additional methylene unit in the amine-containing region, 4-[(6-aminohexyl)(hydroxy)amino]-4-oxobutanoic acid ( for-HBH) or 3-(7-amino-N-hydroxyheptanamido)propanoic acid (ret-HBH), to give the corresponding tris(homoferrioxamine E) macrocycles, for-[Fe(HHDFOE)] or ret-[Fe(HHDFOE)] ([M + H+]+, m/zcalc 696.3, m/zobs 696.4). The MTS reaction using a constitutional isomer of for-HBH that transposed the methylene unit to the carboxylic acid containing region, 5-[(5-aminopentyl)(hydroxy)amino]-5-oxopentanoic acid (for-PPH), gave the macrocycle for-[Fe(HPDFOE)] in a yield significantly less than that for for-[Fe(HHDFOE)], with the gallium(III) analogue for-[Ga(HPDFOE)] unable to be detected. The work demonstrates the utility and limits of MTS for the assembly of macrocyclic siderophores from endo-hydroxamic acid monomers. Indirect measures (RP-HPLC order of elution, c log P values, molecular mechanics, and density functional theory calculations) of the relative water solubility of the ligands, the iron(III) macrocycles, and the apomacrocycles were consistent in identifying for-DFOE as the most water-soluble macrocycle from for-DFOE, ret-DFOE, for-HHDFOE, ret-HHDFOE, and for-HPDFOE. From this group, only for-DFOE is known in nature, which could suggest that water solubility is an important trait in its natural selection