Design And Fabrication of Condenser Microphone Using Wafer Transfer And Micro-electroplating Technique

A novel fabrication process, which uses wafer transfer and micro-electroplating technique, has been proposed and tested. In this paper, the effects of the diaphragm thickness and stress, the air-gap thickness, and the area ratio of acoustic holes to backplate on the sensitivity of the condenser microphone have been demonstrated since the performance of the microphone depends on these parameters. The microphone diaphragm has been designed with a diameter and thickness of 1.9 mm and 0.6 $\mu$m, respectively, an air-gap thickness of 10 $\mu$m, and a 24% area ratio of acoustic holes to backplate. To obtain a lower initial stress, the material used for the diaphragm is polyimide. The measured sensitivities of the microphone at the bias voltages of 24 V and 12 V are -45.3 and -50.2 dB/Pa (at 1 kHz), respectively. The fabricated microphone shows a flat frequency response extending to 20 kHz.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838

Finishing the euchromatic sequence of the human genome

The sequence of the human genome encodes the genetic instructions for human physiology, as well as rich information about human evolution. In 2001, the International Human Genome Sequencing Consortium reported a draft sequence of the euchromatic portion of the human genome. Since then, the international collaboration has worked to convert this draft into a genome sequence with high accuracy and nearly complete coverage. Here, we report the result of this finishing process. The current genome sequence (Build 35) contains 2.85 billion nucleotides interrupted by only 341 gaps. It covers ∼99% of the euchromatic genome and is accurate to an error rate of ∼1 event per 100,000 bases. Many of the remaining euchromatic gaps are associated with segmental duplications and will require focused work with new methods. The near-complete sequence, the first for a vertebrate, greatly improves the precision of biological analyses of the human genome including studies of gene number, birth and death. Notably, the human enome seems to encode only 20,000-25,000 protein-coding genes. The genome sequence reported here should serve as a firm foundation for biomedical research in the decades ahead

Bizonplast, a unique chloroplast in the epidermal cells of microphylls in the shade plant Selaginella erythropus (Selaginellaceae)

Study of the unique leaf anatomy and chloroplast structure in shade-adapted plants will aid our understanding of how plants use light efficiently in low light environments. Unusual chloroplasts in terms of size and thylakoid membrane stacking have been described previously in several deep-shade plants. In this study, a single giant cup-shaped chloroplast, termed a bizonoplast, was found in the abaxial epidermal cells of the dorsal microphylls and the adaxial epidermal cells of the ventral microphylls in the deep-shade spike moss Selaginella erythropus. Bizonoplasts are dimorphic in ultrastructure: the upper zone is occupied by numerous layers of 2–4 stacked thylakoid membranes while the lower zone contains both unstacked stromal thylakoids and thylakoid lamellae stacked in normal grana structure oriented in different directions. In contrast, other cell types in the microphylls contain chloroplasts with typical structure. This unique chloroplast has not been reported from any other species. The enlargement of epidermal cells into funnel-shaped, photosynthetic cells coupled with specific localization of a large bizonoplast in the lower part of the cells and differential modification in ultrastructure within the chloroplast may allow the plant to better adapt to low light. Further experiments are required to determine whether this shade-adapted organism derives any evolutionary or ecophysiological fitness from these unique chloroplasts

Bizonoplast a unique chloroplast in the epidermal cells of microphylls in the shade plant Selaginella Erythropus (Selaginellaceae)

Copyright © 2007 Botanical Society of America, Inc.Chiou-Rong Sheue, Vassilios Sarafis, Ruth Kiew, Ho-Yih Liu, Alexandre Salino, Ling-Long Kuo-Huang, Yuen-Po Yang, Chi-Chu Tsai, Chun-Hung Lin, Jean W. H. Yong and Maurice S. B. K

Use and Cost-effectiveness of a Telehealth Service at a Centralized COVID-19 Quarantine Center in Taiwan: Cohort Study

[[abstract]]Background: Telehealth is a recommended method for monitoring the progression of nonsevere infections in patients with COVID-19. However, telehealth has not been widely implemented to monitor SARS-CoV-2 infection in quarantined individuals. Moreover, studies on the cost-effectiveness of quarantine measures during the COVID-19 pandemic are scarce. Objective: In this cohort study, we aimed to use telehealth to monitor COVID-19 infections in 217 quarantined Taiwanese travelers and to analyze the cost-effectiveness of the quarantine program. Methods: Travelers were quarantined for 14 days at the Taiwan Yangmingshan quarantine center and monitored until they were discharged. The travelers' clinical symptoms were evaluated twice daily. A multidisciplinary medical team used the telehealth system to provide timely assistance for ill travelers. The cost of the mandatory quarantine was calculated according to data from the Ministry of Health and Welfare of Taiwan. Results: All 217 quarantined travelers tested negative for SARS-CoV-2 upon admission to the quarantine center. During the quarantine, 28/217 travelers (12.9%) became ill and were evaluated via telehealth. Three travelers with fever were hospitalized after telehealth assessment, and subsequent tests for COVID-19 were negative for all three patients. The total cost incurred during the quarantine was US $193,938, which equated to US$894 per individual. Conclusions: Telehealth is an effective instrument for monitoring COVID-19 infection in quarantined travelers and could help provide timely disease management for people who are ill. It is imperative to screen and quarantine international travelers for SARS-CoV-2 infection to reduce the nationwide spread of COVID-19

Development of the Asymmetric Microstructure of Carbon Molecular Sieve Membranes as Probed by Positron Annihilation Spectroscopy

The development of the microstructure of carbon molecular sieve membranes (CMSMs) was examined using a variable monoenergy slow positron beam (VMSPB). To vary the structure of the CMSMs fabricated by pyrolyzing a Kapton precursor, different pyrolysis temperatures at a fixed heating rate under vacuum conditions and various periods of holding time at a given pyrolysis temperature were applied. The VMSPB was integrated with the platinum (Pt) capping technique, in which a layer of Pt was sputtered on the membrane surface to eliminate the back diffusion effect of positrons. On the basis of the depth profile obtained, the membranes carbonized at 800 and 900 °C were demonstrated to exhibit asymmetric microstructures at the top layer. The analysis of positron annihilation spectroscopic data of the membranes using a VEPFIT program revealed three structural layers at the most: a dense top layer, a transition layer, and an underlying layer. At prolonged holding time, it was found that the decrease in the gas permeation was correlated not only to the reduction in the pore volume but also to the increase in the dense layer thickness