Design and Fabrication of a 1 m Model of the 70 mm Bore Twin Aperture Superconducting Quadrupole for the LHC Insertions

For reasons of geometrical acceptance, 70 mm bore twin aperture quadrupoles are required in the LHC insertions. For an operating gradient of 160 T/m at 4.5 K, a design based on a four layer coil wound from two graded 8.2 mm NbTi conductors has been developed. Three 1 m single aperture quadrupoles of this design have been built and successfully tested. Thereafter, the magnets have been disassembled and the coils re-collared using self-supporting collars. In this paper, we describe the design features of the twin aperture quadrupole, and report on the initial collaring tests and procedures for collaring and final assembly of the 1 m magnet

Progress in the Development of the 1 m Model of the 70 mm Aperture Quadrupole for the LHC Low-β\beta Insertions

Within the LHC magnet development program Oxford Instruments has built a one metre model of the 70 mm aperture low-beta quadrupole. The magnet features a four layer coil wound from two 8.2 mm wide graded NbTi cables, and is designed for 250 T/m at 1.9 K. The magnet has previously been tested between 4.5 K and 2.3 K. In this paper we review the magnet rebuild and the subsequent tests. Results on magnet training at 4.3 K and 1.9 K are presented along with the results related to quench protection studies.

Quench Performance and Field Quality Measurements of the First LHC low-β\beta Quadrupole Model

As part of the LHC magnet development program, CERN in collaboration with Oxford Instruments has designed, built and tested a one metre model of a 70 mm aperture low-beta quadrupole. The magnet features a four layer coil, and is designed for 250 T/m at 1.9 K. We review the results of the magnet training and quench propagation studies performed at 4.3 K and 1.9 K, and report on the magnetic field measurements

Methods for the analysis of ordinal response data in medical image quality assessment.

The assessment of image quality in medical imaging often requires observers to rate images for some metric or detectability task. These subjective results are used in optimisation, radiation dose reduction or system comparison studies and may be compared to objective measures from a computer vision algorithm performing the same task. One popular scoring approach is to use a Likert scale, then assign consecutive numbers to the categories. The mean of these response values is then taken and used for comparison with the objective or second subjective response. Agreement is often assessed using correlation coefficients. We highlight a number of weaknesses in this common approach, including inappropriate analyses of ordinal data, and the inability to properly account for correlations caused by repeated images or observers. We suggest alternative data collection and analysis techniques such as amendments to the scale and multilevel proportional odds models. We detail the suitability of each approach depending upon the data structure and demonstrate each method using a medical imaging example. Whilst others have raised some of these issues, we evaluated the entire study from data collection to analysis, suggested sources for software and further reading, and provided a checklist plus flowchart, for use with any ordinal data. We hope that raised awareness of the limitations of the current approaches will encourage greater method consideration and the utilisation of a more appropriate analysis. More accurate comparisons between measures in medical imaging will lead to a more robust contribution to the imaging literature and ultimately improved patient care

Late Byzantine Mineral Soda High Alumina Glasses from Asia Minor: A New Primary Glass Production Group

The chemical characterisation of archaeological glass allows the discrimination between different glass groups and the identification of raw materials and technological traditions of their production. Several lines of evidence point towards the large-scale production of first millennium CE glass in a limited number of glass making factories from a mixture of Egyptian mineral soda and a locally available silica source. Fundamental changes in the manufacturing processes occurred from the eight/ninth century CE onwards, when Egyptian mineral soda was gradually replaced by soda-rich plant ash in Egypt as well as the Islamic Middle East. In order to elucidate the supply and consumption of glass during this transitional period, 31 glass samples from the assemblage found at Pergamon (Turkey) that date to the fourth to fourteenth centuries CE were analysed by electron microprobe analysis (EPMA) and by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The statistical evaluation of the data revealed that the Byzantine glasses from Pergamon represent at least three different glass production technologies, one of which had not previously been recognised in the glass making traditions of the Mediterranean. While the chemical characteristics of the late antique and early medieval fragments confirm the current model of glass production and distribution at the time, the elemental make-up of the majority of the eighth- to fourteenth-century glasses from Pergamon indicate the existence of a late Byzantine glass type that is characterised by high alumina levels. Judging from the trace element patterns and elevated boron and lithium concentrations, these glasses were produced with a mineral soda different to the Egyptian natron from the Wadi Natrun, suggesting a possible regional Byzantine primary glass production in Asia Minor

Peasant settlers and the ‘civilizing mission’ in Russian Turkestan, 1865-1917

This article provides an introduction to one of the lesser-known examples of European settler colonialism, the settlement of European (mainly Russian and Ukrainian) peasants in Southern Central Asia (Turkestan) in the late nineteenth and early twentieth centuries. It establishes the legal background and demographic impact of peasant settlement, and the role played by the state in organising and encouraging it. It explores official attitudes towards the settlers (which were often very negative), and their relations with the local Kazakh and Kyrgyz population. The article adopts a comparative framework, looking at Turkestan alongside Algeria and Southern Africa, and seeking to establish whether paradigms developed in the study of other settler societies (such as the ‘poor white’) are of any relevance in understanding Slavic peasant settlement in Turkestan. It concludes that there are many close parallels with European settlement in other regions with large indigenous populations, but that racial ideology played a much less important role in the Russian case compared to religious divisions and fears of cultural backsliding. This did not prevent relations between settlers and the ‘native’ population deteriorating markedly in the years before the First World War, resulting in large-scale rebellion in 1916

University of Miami Radiocarbon Dates XXII

This material was digitized as part of a cooperative project between Radiocarbon and the University of Arizona Libraries.The Radiocarbon archives are made available by Radiocarbon and the University of Arizona Libraries. Contact [email protected] for further information.Migrated from OJS platform February 202

MERLIN, a new high count rate spectrometer at ISIS

MERLIN is designed to be a high intensity, medium energy resolution spectrometer. As such, it will complement the high-resolution MAPS spectrometer at ISIS. MERLIN will utilise all the latest advances in technology with a supermirror guide to enhance flux as well as 3m long position-sensitive detectors in a vacuum making it ideal for single-crystal users. The detector bank will cover a massive p steradians of solid angle with an angular range from 451 to +1351 degrees in the horizontal plane and 7301 degrees in the vertical plane. This will allow large swathes of Q,o space to be accessed in a single run. The instrument will be ready for commissioning in February 2006. This paper presents details of design and performance of this new instrument