二液混合系のナノ秒赤外レーザー誘起相分離におけるメゾスコピック構造変化と可視発光現象

Tohoku University福村裕史課

One-Directional Antenna Systems: Energy Transfer from Monomers to JAggregates within 1D Nanoporous Aluminophosphates

A cyanine dye (PIC) was occluded into two 1D-nanopoporus Mg-containing aluminophosphates with different pore size (MgAPO-5 and MgAPO-36 with AFI and ATS zeolitic structure types, with cylindrical channels of 7.3 Å diameter and elliptical channels of 6.7 Å × 7.5 Å, respectively) by crystallization inclusion method. Different J-aggregates are photophysically characterized as a consequence of the different pore size of the MgAPO frameworks, with emission bands at 565 nm and at 610 nm in MgAPO-5 and MgAPO-36, respectively. Computational results indicate a more linear geometry of the J-aggregates inside the nanochannels of the MgAPO-36 sample than those in MgAPO-5, which is as a consequence of the more constrained environment in the former. For the same reason, the fluorescence of the PIC monomers at 550 nm is also activated within the MgAPO-36 channels. Owing to the strategic distribution of the fluorescent PIC species in MgAPO-36 crystals (monomers at one edge and J-aggregates with intriguing emission properties at the other edge) an efficient and one-directional antenna system is obtained. The unidirectional energy transfer process from monomers to J-aggregates is demonstrated by remote excitation experiments along tens of microns of distance.Financial support from Gobierno Vasco (IT912-16) and Ministerio de Economía y Competitividad “MINECO” (through Projects MAT2014-51937-C3-3-P, MAT2016-77496-R and MAT-2015-65767-P) is acknowledged. R.S.L. and V.M.M. acknowledge niversidad del PaísVasco (UPV-EHU) for a postdoctoral fellowship and MINECO for a “Ramón y Cajal” Contract RYC-2011-09505), respectively. H.U. gratefully acknowledges the financial support of the European Research Council (#280064), the FWO (G056314N, G0B5514N, G081916N), and JSPS KAKENHI (JP17H03003, JP17H05244, JP17H05458). Centro Técnico de Informática (CSIC) is acknowledged for running the calculations and Accelrys for providing the computational softwar

Host and guest joining forces : a holistic approach for metal-organic frameworks in nonlinear optics

Metal-organic frameworks (MOFs) are interesting candidates for applications in nonlinear optics (NLO). However, current design strategies for MOFs in NLO are typically limited to either engineering the MOF itself or using the MOF to align NLO-active molecules within its pores. But more design factors can be considered when engineering MOFs and choosing guest molecules. The NLO emission of the host and guests can be combined instead of using only either one of the two. The interaction between the host and guest can be a source for further improvement by changing the symmetry, dipole moment, bond lengths, charge distribution, etc. Additionally, unstable NLO molecules can potentially be stabilized by accommodation in the MOF. Here, we demonstrate a new strategy for MOFs by combining MOF-177 as a host and Li@C-60 as a guest for NLO, meaning that both the MOF itself as well as the guest molecules are emitting NLO signals, as well as further increasing the emission using their interaction elongating bonds within the MOF, thus fully using the MOF's potential for second harmonic generation. Using this approach, the overall emission can be boosted by 40% compared to MOF-177 alone. Furthermore, the accommodation into MOF-177 stabilizes Li@C-60 that is normally unstable under ambient conditions without a counterion

Time-Resolved Structured Illumination Microscopy for Phase Separation Dynamics of Water and 2-Butoxyethanol Mixtures: Interpretation of "Early Stage" Involving Micelle-Like Structures

Phase separation dynamics of a water/2-butoxyethanol (2BE) mixture was studied with newly developed time-resolved structured illumination microscopy (SIM). Interestingly, an employed hydrophobic fluorescent probe for SIM showed spectral shifts up to 500 ns after a laser-induced temperature jump, which suggests 2BE micellar-like aggregates become more hydrophobic at the initial stage of phase separation. This hydrophobic environment in 2BE aggregates, probably due to the ejection of water molecules, continued up to at least 10 μs. Time-resolved SIM and previously reported light scattering data clearly showed that the size of a periodic structure remained constant (ca. 300 nm) from 3 to 10 μs, and then the growth of periodic structures having the self-similarity started. We think that the former and the latter processes correspond to "early stage" (concentration growth) and "late stage" (size growth), respectively, in phase separation dynamics. Here we suggest that, in the early stage, the entity to bear 2BE phase be water-poor 2BE aggregates, and the number density of these aggregates would simply increase in time.status: publishe

Phase Separation Dynamics of a Binary Fluid with a Closed-Loop Phase Diagram

status: publishe

Silver nanowires for highly reproducible cantilever based AFM-TERS microscopy: towards a universal TERS probe'

Tip-enhanced Raman scattering (TERS) microscopy is a unique analytical tool to provide complementary chemical and topographic information of surfaces with nanometric resolution. However, difficulties in reliably producing the necessary metallized scanning probe tips has limited its widespread utilisation, particularly in the case of cantilever-based atomic force microscopy. Attempts to alleviate tip related issues using colloidal or bottom-up engineered tips have so far not reported consistent probes for both Raman and topographic imaging. Here we demonstrate the reproducible fabrication of cantilever-based high-performance TERS probes for both topographic and Raman measurements, based on an approach that utilises noble metal nanowires as the active TERS probe. The tips show 10 times higher TERS contrasts than the most typically used electrochemically-etched tips, and show a reproducibility for TERS greater than 90%, far greater than found with standard methods. We show that TERS can be performed in tapping as well as contact AFM mode, with optical resolutions around or below 15 nm, and with a maximum resolution achieved in tapping-mode of 6 nm. Our work illustrates that superior TERS probes can be produced in a fast and cost-effective manner using simple wet-chemistry methods, leading to reliable and reproducible high-resolution and high-sensitivity TERS, and thus renders the technique applicable for a broad community.status: publishe

Amphiphilic complexes of Ho(iii), Dy(iii), Tb(iii) and Eu(iii) for optical and high field magnetic resonance imaging

Lanthanides, holmium(iii), dysprosium(iii), and terbium(iii), were coordinated to an amphiphilic DOTA bis-coumarin derivative and then further assembled with an amphiphilic europium(iii) DTPA bis-coumarin derivative into mono-disperse micelles. The self-assembled micelles were characterized and assessed for their potential as bimodal contrast agents for high field magnetic resonance and optical imaging applications. All micelles showed a high transverse relaxation (r2) of 46, 34, and 30 s-1 mM-1 at 500 MHz and 37 °C for Dy(iii), Ho(iii) and Tb(iii), respectively, which is a result of the high magnetic moment of these lanthanides and the long rotational correlation time of the micelles. The quantum yield in aqueous solution ranged from 1.8% for Tb/Eu to 1.4% for Dy/Eu and 1.0% for the Ho/Eu micelles. Multi-photon excited emission spectroscopy has shown that due to the two-photon absorption of the coumarin chromophore the characteristic Eu(iii) emission could be observed upon excitation at 800 nm, demonstrating the usefulness of the system for in vivo fluorescence imaging applications. To the best of our knowledge, this is the first example reporting the potential of a holmium(iii) chelate as a negative MRI contrast agent.status: publishe

Liquid-phase photo-induced covalent modification (PICM) of single-layer graphene by short-chain fatty acids

We report an efficient photo-induced covalent modification (PICM) of graphene by short-chain fatty acids (SCFAs) with an alkyl chain at the liquid-solid interface for spatially resolved chemical functionalization of graphene. Light irradiation on monolayer graphene under an aqueous solution of the SCFAs with an alkyl chain efficiently introduces sp(3)-hybridized defects, where the reaction rates of PICM are significantly higher than those in pure water. Raman and IR spectroscopy revealed that a high density of methyl, methoxy, and acetate groups is covalently attached to the graphene surface while it was partially oxidized by other oxygen-containing functional groups, such as OH and COOH. A greater downshift of the G-band in Raman spectra was observed upon the PICM with longer alkyl chains, suggesting that the charge doping effect can be controlled by the alkyl chain length of the SCFAs. The systematic research and exploration of covalent modification in SCFAs provide new insight and a potentially facile method for bandgap engineering of graphene

Water-mediated polyol synthesis of pencil-like sharp silver nanowires suitable for nonlinear plasmonics

We report a simple method to control the end shape of silver nanowires by adding pure water in the conventional polyol synthesis. The use of 0.2-0.4% (v/v) water in ethylene glycol as a solvent provides pencil-like silver nanowires with sharp ends in a high yield. We have demonstrated remote excitation of SHG on the sharp nanowires, promising a point light source for super resolution microscopy.status: publishe