Caught while Dissolving: Revealing the Interfacial Solvation of the Mg2+ Ions on the MgO Surface

Interfaces between water and materials are ubiquitous and are crucial in materials sciences and in biology, where investigating the interaction of water with the surface under ambient conditions is key to shedding light on the main processes occurring at the interface. Magnesium oxide is a popular model system to study the metal oxide-water interface, where, for sufficient water loadings, theoretical models have suggested that reconstructed surfaces involving hydrated Mg2+ metal ions may be energetically favored. In this work, by combining experimental and theoretical surface-selective ambient pressure X-ray absorption spectroscopy with multivariate curve resolution and molecular dynamics, we evidence in real time the occurrence of Mg2+ solvation at the interphase between MgO and solvating media such as water and methanol (MeOH). Further, we show that the Mg2+ surface ions undergo a reversible solvation process, we prove the dissolution/redeposition of the Mg2+ ions belonging to the MgO surface, and we demonstrate the formation of octahedral [Mg(H2O)6]2+ and [Mg(MeOH)6]2+ intermediate solvated species. The unique surface, electronic, and structural sensitivity of the developed technique may be beneficial to access often elusive properties of low-Z metal ion intermediates involved in interfacial processes of chemical and biological interest

MOF-Derived CeO2 and CeZrOx Solid Solutions: Exploring Ce Reduction through FTIR and NEXAFS Spectroscopy

The development of Ce-based materials is directly dependent on the catalyst surface defects, which is caused by the calcination steps required to increase structural stability. At the same time, the evaluation of cerium’s redox properties under reaction conditions is of increasing relevant importance. The synthesis of Ce-UiO-66 and CeZr-UiO-66 and their subsequent calcination are presented here as a simple and inexpensive approach for achieving homogeneous and stable CeO2 and CeZrOx nanocrystals. The resulting materials constitute an ideal case study to thoroughly understand cerium redox properties. The Ce3+/Ce4+ redox properties are investigated by H2-TPR experiments exploited by in situ FT-IR and Ce M5-edge AP-NEXAFS spectroscopy. In the latter case, Ce3+ formation is quantified using the MCR-ALS protocol. FT-IR is then presented as a high potential/easily accessible technique for extracting valuable information about the cerium oxidation state under operating conditions. The dependence of the OH stretching vibration frequency on temperature and Ce reduction is described, providing a novel tool for qualitative monitoring of surface oxygen vacancy formation. Based on the reported results, the molecular absorption coefficient of the Ce3+ characteristic IR transition is tentatively evaluated, thus providing a basis for future Ce3+ quantification through FT-IR spectroscopy. Finally, the FT-IR limitations for Ce3+ quantification are discussed

Transparent conductive oxide-based architectures for the electrical modulation of the optical response: A spectroscopic ellipsometry study

Transparent conductive oxides are a class of materials that combine high optical transparency with high electrical conductivity. This property makes them uniquely appealing as transparent conductive electrodes in solar cells and interesting for optoelectronic and infrared-plasmonic applications. One of the new challenges that researchers and engineers are facing is merging optical and electrical control in a single device for developing next-generation photovoltaic, optoelectronic devices and energy-efficient solid-state lighting. In this work, the authors investigated the possible variations in the dielectric properties of aluminum-doped ZnO (AZO) upon gating by means of spectroscopic ellipsometry (SE). The authors investigated the electrical-bias-dependent optical response of thin AZO films fabricated by magnetron sputtering within a parallel-plane capacitor configuration. The authors address the possibility to control their optical and electric performances by applying bias, monitoring the effect of charge injection/depletion in the AZO layer by means of in operando SE versus applied gate voltage

Pushing Stoichiometries of Lithium-Rich Layered Oxides Beyond Their Limits

Lithium-rich layered oxides (LRLOs) are opening unexplored frontiers for high-capacity/high-voltage positive electrodes in Li-ion batteries (LIBs) to meet the challenges of green and safe transportation as well as cheap and sustainable stationary energy storage from renewable sources. LRLOs exploit the extra lithiation provided by the Li1.2TM0.8O2 stoichiometries (TM = a blend of transition metals with a moderate cobalt content) achievable by a layered structure to disclose specific capacities beyond 200-250 mA h g(-1) and working potentials in the 3.4-3.8 V range versus Li. Here, we demonstrate an innovative paradigm to extend the LRLO concept. We have balanced the substitution of cobalt in the transition-metal layer of the lattice with aluminum and lithium, pushing the composition of LRLO to unexplored stoichiometries, that is, Li-1.2(+x)(Mn,Ni,Co,AI)(0.8-x)O2-delta. The fine tuning of the composition of the metal blend results in an optimized layered material, that is, Li1.28Mn0.54Ni0.13Co0.02Al0.03O2-delta, with outstanding electrochemical performance in full LIBs, improved environmental benignity, and reduced manufacturing costs compared to the state-of-the-art

Electronically ordered ultrathin Cr2O3 on Pt(1 1 1) in presence of a multidomain graphene intralayer

In the last decade, reducing the dimensionality of materials to few atomic layers thickness has allowed exploring new physical properties and functionalities otherwise absent out of the two dimensional limit. In this regime, interfaces and interlayers play a crucial role. Here, we investigate their influence on the electronic properties and structural quality of ultrathin Cr2O3 on Pt(111), in presence of a multidomain graphene intralayer. Specifically, by combining Low-Energy Electron Diffraction, X-ray Photoelectron Spectroscopy and X-ray Absorption Spectroscopy, we confirm the growth of high-quality ultrathin Cr2O3 on bare Pt, with sharp surface reconstructions, proper stoichiometry and good electronic quality. Once a multidomain graphene intralayer is included at the metal/oxide interface, the Cr2O3 maintained its correct stoichiometry and a comparable electronic quality, even at the very first monolayers, despite the partially lost of the morphological long-range order. These results show how ultrathin Cr2O3 films are slightly affected by the interfacial epitaxial quality from the electronic point of view, making them potential candidates for graphene-integrated heterostructures

Catching the Reversible Formation and Reactivity of Surface Defective Sites in Metal-Organic Frameworks: An Operando Ambient Pressure-NEXAFS Investigation

In this work, we apply for the first time ambient pressure operando soft X-ray absorption spectroscopy (XAS) to investigate the location, structural properties, and reactivity of the defective sites present in the prototypical metal-organic framework HKUST-1. We obtained direct evidence that Cu+ defective sites form upon temperature treatment of the powdered form of HKUST-1 at 160 degrees C and that they are largely distributed on the material surface. Further, a thorough structural characterization of the Cu+/Cu2+ dimeric complexes arising from the temperature-induced dehydration/decarboxylation of the pristine Cu2+/Cu2+ paddlewheel units is reported. In addition to characterizing the surface defects, we demonstrate that CO2 may be reversibly adsorbed and desorbed from the surface defective Cu+/Cu2+ sites. These findings show that ambient pressure soft-XAS, combined with state-ofthe-art theoretical calculations, allowed us to shed light on the mechanism involving the decarboxylation of the paddlewheel units on the surface to yield Cu+/Cu2+ complexes and their reversible restoration upon exposure to gaseous CO2

Magnetic Proximity Effect as a Pathway to Spintronic Applications of Topological Insulators

Spin-based electronics in topological insulators (TIs) is favored by the long spin coherence1,2 and consequently fault-tolerant information storage. Magnetically doped TIs are ferromagnetic up to 13 K,3 well below any practical operating condition. Here we demonstrate that the long range ferromagnetism at ambient temperature can be induced in Bi2-xMnxTe3 by the magnetic proximity effect through deposited Fe overlayer. This result opens a new path to interface-controlled ferromagnetism in TI-based spintronic devices.Comment: accepted in Nano Letter

Identification of point mutations and large intragenic deletions in Fanconi anemia using next-generation sequencing technology

Fanconi anemia (FA) is a rare bone marrow failure disorder characterized by clinical and genetic heterogeneity with at least 17 genes involved, which make molecular diagnosis complex and time-consuming. Since next-generation sequencing technologies could greatly improve the genetic testing in FA, we sequenced DNA samples with known and unknown mutant alleles using the Ion PGMTM system (IPGM). The molecular target of 74.2 kb in size covered 96% of the FA-coding exons and their flanking regions. Quality control testing revealed high coverage. Comparing the IPGM and Sanger sequencing output of FANCA, FANCC, and FANCG we found no false-positive and a few false-negative variants, which led to high sensitivity (95.58%) and specificity (100%) at least for these two most frequently mutated genes. The analysis also identified novel mutant alleles, including those in rare complementation groups FANCF and FANCL. Moreover, quantitative evaluation allowed us to characterize large intragenic deletions of FANCA and FANCD2, suggesting that IPGM is suitable for identification of not only point mutations but also copy number variations