204 research outputs found
Selective detection of dopamine with an all PEDOT:PSS Organic Electrochemical Transistor
open6noAn all PEDOT:PSS Organic Electrochemical Transistor (OECT) has been developed and used for the selective detection of dopamine (DA) in the presence of interfering compounds (ascorbic acid, AA and uric acid, UA). The selective response has been implemented using a potentiodynamic approach, by varying the operating gate bias voltage and the scan rate.
The trans-conductance curves allow to obtain a linear calibration plot for AA, UA and DA and to separate the redox waves associated to each compound; for this purpose, the scan rate is an important parameter to achieve a good resolution. The sensitivities and limits of detection obtained with the OECT have been compared with those obtained by potential step amperometric techniques (cyclic voltammetry and differential pulse voltammetry), employing a PEDOT:PSS working electrode: our results prove that the all-PEDOT:PSS OECT sensitivities and limits of detection are comparable or even better than those obtained by DPV, a technique that employs a sophisticate potential wave and read-out system in order to maximize the performance of electrochemical sensors and that can hardly be considered a viable readout method in practical applications.openGualandi, Isacco; Tonelli, Domenica; Mariani, Federica; Scavetta, Erika; Marzocchi, Marco; Fraboni, BeatriceGualandi, Isacco; Tonelli, Domenica; Mariani, Federica; Scavetta, Erika; Marzocchi, Marco; Fraboni, Beatric
Print‐Light‐Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing
The one-step fabrication of gold films by inkjet printing of a gold precursor ink
and its photochemical reduction by exposure to UV light is presented. Inkjet
printing creates on a substrate with high control micrometer-thin reaction
volumes in which upon direct high-intensity light irradiation, the gold
precursor reduces to pure and well-adhered Au particles, while all other ink
components escape in the gas phase, without the need for any further
post-treatment. The Au precursor ink does neither contain stabilizing agents,
such as polymers or surfactants, nor sacrificial compounds, such as
photoinitiators, to initiate and accelerate the reduction. This economic and
green process is known as Print-Light-Synthesis (PLS) and is herein used to
create gold patterns of thin compact Au films and separated Au nanoparticles.
Gold loadings are in the μg cm−2 range and precisely controlled, thanks to the
inkjet printing parameters. The gold films are characterized by spectroscopic
and electrochemical methods. Finally, the applicability of Au films as
electrochemical sensors is demonstrated for the detection of 1,4-butanediol in
comparison to a commercial screen-printed Au electrode. The PLS Au
electrode shows a 20 times higher sensitivity and opens new possibilities for
disposable electrode production
Recommended from our members
Heterobimetallic conducting polymers based on salophen complexes via electrosynthesis
In this work, we report the first electrochemical synthesis of two copolymeric bimetallic conducting polymers by a simple anodic electropolymerization method. The adopted precursors are electroactive transition metal (M = Ni, Cu and Fe) salophen complexes, which can be easily obtained by direct chemical synthesis. The resulting films, labeled poly-NiCu and poly-CuFe, were characterized by cyclic voltammetry in both organic and aqueous media, attenuated total reflectance Fourier transform infrared spectroscopy, UV-vis spectroscopy, scanning electron microscopy, and coupled energy dispersive X-ray spectroscopy. The films are conductive and exhibit great electrochemical stability in both organic and aqueous media (resistant over 100 cycles without significant loss in current response or changes in electrochemical behavior), which makes them good candidates for an array of potential applications. Electrochemical detection of ascorbic acid was performed using both materials
Design of an electrochemically gated organic semiconductor for pH sensing
Since the development of potentiometric ion-selective electrodes, remarkable steps have been taken towards progressive simplification and improved robustness of pH sensing probes. In particular, the design of compact sensing architectures using solid-state components holds great potential for portable and wearable applications. Here we report the development of an electrochemically gated device for pH detection, combining the robustness of potentiometric-like transduction with an extremely simple and integrated geometry requiring no reference. The sensor is a two-point probe device comprising two thin polymeric films, i.e. a charge transport layer and a pH-sensitive layer, and exhibits a sensitivity of (8.3 ± 0.2) × 10−3 pH unit−1 in the pH range from 2 to 7. Thanks to the versatility and robustness of the optimised design, a textile pH sensor was fabricated whose performance is comparable with that of glass sensors
Detailing the Self-Discharge of a Cathode Based on a Prussian Blue Analogue
Prussian Blue analogues (PBAs) are a promising class of electrode active materials for batteries. Among them, copper nitroprusside, Cu[Fe(CN)5NO], has recently been investigated for its peculiar redox system, which also involves the nitrosyl ligand as a non-innocent ligand, in addition to the electroactivity of the metal sites, Cu and Fe. This paper studies the dynamics of the electrode, employing surface sensitive X-ray Photoelectron spectroscopy (XPS) and bulk sensitive X-ray absorption spectroscopy (XAS) techniques. XPS provided chemical information on the layers formed on electrode surfaces following the self-discharge process of the cathode material in the presence of the electrolyte. These layers consist mainly of electrolyte degradation products, such as LiF, LixPOyFz and LixPFy. Moreover, as evidenced by XAS and XPS, reduction at both metal sites takes place in the bulk and in the surface of the material, clearly evidencing that a self-discharge process is occurring. We observed faster processes and higher amounts of reduced species and decomposition products in the case of samples with a higher amount of coordination water
Smart Bandaid Integrated with Fully Textile OECT for Uric Acid Real-Time Monitoring in Wound Exudate
: Hard-to-heal wounds (i.e., severe and/or chronic) are typically associated with particular pathologies or afflictions such as diabetes, immunodeficiencies, compression traumas in bedridden people, skin grafts, or third-degree burns. In this situation, it is critical to constantly monitor the healing stages and the overall wound conditions to allow for better-targeted therapies and faster patient recovery. At the moment, this operation is performed by removing the bandages and visually inspecting the wound, putting the patient at risk of infection and disturbing the healing stages. Recently, new devices have been developed to address these issues by monitoring important biomarkers related to the wound health status, such as pH, moisture, etc. In this contribution, we present a novel textile chemical sensor exploiting an organic electrochemical transistor (OECT) configuration based on poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) for uric acid (UA)-selective monitoring in wound exudate. The combination of special medical-grade textile materials provides a passive sampling system that enables the real-time and non-invasive analysis of wound fluid: UA was detected as a benchmark analyte to monitor the health status of wounds since it represents a relevant biomarker associated with infections or necrotization processes in human tissues. The sensors proved to reliably and reversibly detect UA concentration in synthetic wound exudate in the biologically relevant range of 220-750 μM, operating in flow conditions for better mimicking the real wound bed. This forerunner device paves the way for smart bandages integrated with real-time monitoring OECT-based sensors for wound-healing evaluation
Comparative spectroscopic and electrochemical study of N-1 or N-2-alkylated 4-nitro and 7-nitroindazoles
Abstract Our research groups are by long time involved in the study of the reactivity and the pharmacological activity of nitrogen-containing heterocyclic compounds: in this line we have now examined the behaviour of some substituted 4- and 7-nitroindazoles. Considering the fact that nitroreduction processes are often essential steps for the biological activity of nitro compounds and remembering that some nitroindazoles show interesting biological activities, we have collected nuclear magnetic resonance, electron spin resonance, and cyclic voltammetry data and carried out density functional theory computations on the above compounds thus obtaining an accurate picture of electronic distribution and reduction processes of the examined substrates as a function of their chemical structure. Looking also to our previous results obtained examining the behaviour of 5- and 6-nitroindazoles, we have confirmed the different general behaviour of 1- and 2-alkyl substituted nitroindazoles strictly related to the known different electronic distribution in these two classes of compounds. Interestingly, cyclic voltammetry data have confirmed the ability of N-1 H nitroindazoles to give rise to the formation of dimers, already observed by us studying 5- and 6-nitroindazoles
- …