Improvement of Fourier Polarimetry for applications in tomographic photoelasticity

The use of the Fourier Polarimetry method has been demonstrated to extract the three characteristic parameters in integrated photoelasticity. In contrast to the phase-stepping method, it has been shown that the Fourier method is more accurate. However, the Fourier method isn't very efficient as it requires that a minimum of nine intensity images be collected during a whole revolution of a polarizer while the phase-stepping method only needs six intensity images. In this paper the Fourier transformation is used to derive the expression for determination of the characteristic parameters. Four Fourier coefficients are clearly identified to calculate the three characteristic parameters. It is found that the angular rotation ratio could be set arbitrarily. The angular rotation ratio is optimized to satisfy the requirements of efficiency and proper data accuracy, which results in data collection about three times faster than the methods suggested by previous researchers. When comparing their performance in terms of efficiency and accuracy, the simulated and experimental results show that these angular rotation ratios have the same accuracy but the optimized angular rotation ratio is significantly faster. The sensitivity to noise is also investigated and further improvement of accuracy is suggested

Pelvic and Nervous Diseases.: The Third Element in the Equation Between Pelvic and Abdominal Disease in Women and Disturbance in the Nervous System.

n/

Design and performance of a 39cm balloon-borne telescope

A system for stabilizing a balloon-borne telescope using a star sensor device is described. Guide stars from minus four to plus four magnitude can be used and the sensor may be offset with respect to the telescope by as much as plus or minus five degrees in elevation and cross elevation to enable parts of the sky containing no suitable guide stars to be viewed. Acquisition of the guide star and setting of the offset coordinates is carried out by ground command and both may be changed in flight. The main design parameters of the equipment are summarized. Block diagrams and circuit diagrams of the star tracker are provided

Velocity weakening and possibility of aftershocks in nanofriction experiments

We study the frictional behavior of small contacts as those realized in the atomic force microscope and other experimental setups, in the framework of generalized Prandtl-Tomlinson models. Particular attention is paid to mechanisms that generate velocity weakening, namely a decreasing average friction force with the relative sliding velocity.The mechanisms studied model the possibility of viscous relaxation, or aging effects in the contact. It is found that, in addition to producing velocity weakening, these mechanisms can also produce aftershocks at sufficiently low sliding velocities. This provides a remarkable analogy at the microscale, of friction properties at the macroscale, where aftershocks and velocity weakening are two fundamental features of seismic phenomena.Comment: 8 pages, 7 figure

Assessing the sociology of sport: On sports mega-events and capitalist modernity

On the 50th anniversary of the ISSA and IRSS, one of the leading international scholars on sport and consumer culture, John Horne, considers the trajectory and challenges of research on sports mega-events and their place in capitalist modernity. In anchoring work on this topic in Roche’s definition of mega-events, Horne notes that sports mega-events are important symbolic, economic, and political elements in the orientation of nations to stake their place in global society. Fundamental issues about the concept of ‘mega-event’ pose challenges for scholars as questions remain over what qualifies as a sports mega-event and how ‘lived experience’ with such events transacts with media spectacularization and characterization. The essay closes by posing broader questions for further investigation about the economic, political, and social risks and benefits of sports mega-events and how these events may portend and relate to changing relations of economic and political power on a global scale

Design, fabrication, and delivery of a charge injection device as a stellar tracking device

Six 128 x 128 CID imagers fabricated on bulk silicon and with thin polysilicon upper-level electrodes were tested in a star tracking mode. Noise and spectral response were measured as a function of temperature over the range of +25 C to -40 C. Noise at 0 C and below was less than 40 rms carriers/pixel for all devices at an effective noise bandwidth of 150 Hz. Quantum yield for all devices averaged 40% from 0.4 to 1.0 microns with no measurable temperature dependence. Extrapolating from these performance parameters to those of a large (400 x 400) array and accounting for design and processing improvements, indicates that the larger array would show a further improvement in noise performance -- on the order of 25 carriers. A preliminary evaluation of the projected performance of the 400 x 400 array and a representative set of star sensor requirements indicates that the CID has excellent potential as a stellar tracking device

Superlubricity - a new perspective on an established paradigm

Superlubricity is a frictionless tribological state sometimes occurring in nanoscale material junctions. It is often associated with incommensurate surface lattice structures appearing at the interface. Here, by using the recently introduced registry index concept which quantifies the registry mismatch in layered materials, we prove the existence of a direct relation between interlayer commensurability and wearless friction in layered materials. We show that our simple and intuitive model is able to capture, down to fine details, the experimentally measured frictional behavior of a hexagonal graphene flake sliding on-top of the surface of graphite. We further predict that superlubricity is expected to occur in hexagonal boron nitride as well with tribological characteristics very similar to those observed for the graphitic system. The success of our method in predicting experimental results along with its exceptional computational efficiency opens the way for modeling large-scale material interfaces way beyond the reach of standard simulation techniques.Comment: 18 pages, 7 figure

An exhaust sprayer for grasshopper destruction

Spraying with dieldrin mixtures before the insects reach the flying stage has given excellent results in controlling grasshopper plagues, and the Agriculture Protection Board is supplying dieldrin spraying material free of charge to farmers in the Eastern, North-Eastern and Northern Agricultural Areas

Local spectroscopy and atomic imaging of tunneling current, forces and dissipation on graphite

Theory predicts that the currents in scanning tunneling microscopy (STM) and the attractive forces measured in atomic force microscopy (AFM) are directly related. Atomic images obtained in an attractive AFM mode should therefore be redundant because they should be \emph{similar} to STM. Here, we show that while the distance dependence of current and force is similar for graphite, constant-height AFM- and STM images differ substantially depending on distance and bias voltage. We perform spectroscopy of the tunneling current, the frequency shift and the damping signal at high-symmetry lattice sites of the graphite (0001) surface. The dissipation signal is about twice as sensitive to distance as the frequency shift, explained by the Prandtl-Tomlinson model of atomic friction.Comment: 4 pages, 4 figures, accepted at Physical Review Letter

Tawney and the third way

From the 1920s to the 1950s R. H. Tawney was the most influential socialist thinker in Britain. He articulated an ethical socialism at odds with powerful statist and mechanistic traditions in British socialist thinking. Tawney's work is thus an important antecedent to third way thinking. Tawney's religiously-based critique of the morality of capitalism was combined with a concern for detailed institutional reform, challenging simple dichotomies between public and private ownership. He began a debate about democratizing the enterprise and corporate governance though his efforts fell on stony ground. Conversely, Tawney's moralism informed a whole-hearted condemnation of market forces in tension with both his concern with institutional reform and modern third way thought. Unfortunately, he refused to engage seriously with emergent welfare economics which for many social democrats promised a more nuanced understanding of the limits of market forces. Tawney's legacy is a complex one, whose various elements form a vital part of the intellectual background to current third way thinking