3 research outputs found
Radiographic study of relative bone density of the retromolar region in pixels and aluminum equivalent milimeters
O objetivo do presente estudo foi comparar a densidade óssea relativa da região retromolar em pixels e em milÃmetros equivalentes de alumÃnio (mmEq/Al). Para a mensuração dos nÃveis de cinza em mmEq/Al na referida região, utilizou-se uma escala de alumÃnio constituÃda por 16 degraus, com 0,3mm de espessura entre cada um deles. Utilizou-se 5 mandÃbulas humanas secas, as quais foram tecnicamente radiografadas, na região anteriormente citada, com filmes Agfa, tempo de exposição de 0,5 segundos e distância focal de 25cm. Estas radiografias foram processadas, em uma câmara escura, pelo método de tempo e temperatura e, posteriormente escaneadas com 300 dpi. As imagens digitalizadas foram medidas por meio da ferramenta histograma, do programa Image Tool, versão 3.0 (UTHSCSA, USA). Inicialmente, foram manipuladas através da função automática de alteração de brilho e contraste e em seguida, foram selecionadas para as medições nas regiões ósseas, áreas de 32X32 pixels, evitando-se regiões excessivamente radiopacas ou radiolúcidas, bem como, de estruturas anatômicas, para que não houvesse alterações no valor da densidade óssea relativa. Já nas imagens dos degraus da escala, foram medidas áreas de 20X50 pixels, com a mesma ferramenta. A análise dos resultados, pelo teste estatÃstico T de Student, mostrou valores semelhantes entre a densidade óssea da região retromolar e o degrau de número 16 da escala de alumÃnio (p>0,05). Concluiu-se que a densidade da escala de alumÃnio, utilizada neste estudo é semelhante a densidade óssea relativa da região avaliada, podendo ser utilizada como unidade de medida referencial na análise dos nÃveis de cinza mandibulares.The objective of this research was to compare the relative bone density of the retromolar region, in pixels and aluminum equivalent milimeters. It was used an aluminum stepwedge to measure the gray levels in this region; this stepwedge was formed by 16 degrees with 0,3mm between each one. Five human dried mandibles were used, which were technicaly radiographied on the region previously mentioned, using Agfa film, 0,5 seconds of time of exposition and focal distance of 25cm. These radiographics were processed by the time and temperature method, and later digitalized with 300 dpi. The digital images were measured by the histogram resource of the Image Tool software, version 3.0 (UTHSCSA,USA). Initially the mandibles were manipulated using the bright and contrast automatic change function called stretch. Then areas of 32X32 pixels were selected for the measures in bone regions, avoiding those excessively radiopaque or radiolucent, as well as anathomic strutures, so that no alterations interfere in the levels of bone density. For the images of the aluminum stepwedge, areas of 20X50 pixels were measured using the same histogram resourse. Using the Student-t test, similar values were shown between the retromolar bone region density and the degree number 16 of the aluminum’s scale (p>0,05). It was conclude that the density of aluminum’s scale, used in the research is similar to the relative bone density of analised regions, showing that it can be used as an unit of referencial measure in the analysis of mandible gray levels
Estudo radiográfico da densidade óssea relativa da região retromolar em pixels e milÃmetros equivalentes de alumÃnio
The objective of this research was to compare the relative bone density of the retromolar region, in pixels and aluminum equivalent milimeters. It was used an aluminum stepwedge to measure the gray levels in this region; this stepwedge was formed by 16 degrees with 0,3mm between each one. Five human dried mandibles were used, which were technicaly radiographied on the region previously mentioned, using Agfa film, 0,5 seconds of time of exposition and focal distance of 25cm. These radiographics were processed by the time and temperature method, and later digitalized with 300 dpi. The digital images were measured by the histogram resource of the Image Tool software, version 3.0 (UTHSCSA,USA). Initially the mandibles were manipulated using the bright and contrast automatic change function called stretch. Then areas of 32X32 pixels were selected for the measures in bone regions, avoiding those excessively radiopaque or radiolucent, as well as anathomic strutures, so that no alterations interfere in the levels of bone density. For the images of the aluminum stepwedge, areas of 20X50 pixels were measured using the same histogram resourse. Using the Student-t test, similar values were shown between the retromolar bone region density and the degree number 16 of the aluminum’s scale (p>0,05). It was conclude that the density of aluminum’s scale, used in the research is similar to the relative bone density of analised regions, showing that it can be used as an unit of referencial measure in the analysis of mandible gray levels.O objetivo do presente estudo foi comparar a densidade óssea relativa da região retromolar em pixels e em milÃmetros equivalentes de alumÃnio (mmEq/Al). Para a mensuração dos nÃveis de cinza em mmEq/Al na referida região, utilizou-se uma escala de alumÃnio constituÃda por 16 degraus, com 0,3mm de espessura entre cada um deles. Utilizou-se 5 mandÃbulas humanas secas, as quais foram tecnicamente radiografadas, na região anteriormente citada, com filmes Agfa, tempo de exposição de 0,5 segundos e distância focal de 25cm. Estas radiografias foram processadas, em uma câmara escura, pelo método de tempo e temperatura e, posteriormente escaneadas com 300 dpi. As imagens digitalizadas foram medidas por meio da ferramenta histograma, do programa Image Tool, versão 3.0 (UTHSCSA, USA). Inicialmente, foram manipuladas através da função automática de alteração de brilho e contraste e em seguida, foram selecionadas para as medições nas regiões ósseas, áreas de 32X32 pixels, evitando-se regiões excessivamente radiopacas ou radiolúcidas, bem como, de estruturas anatômicas, para que não houvesse alterações no valor da densidade óssea relativa. Já nas imagens dos degraus da escala, foram medidas áreas de 20X50 pixels, com a mesma ferramenta. A análise dos resultados, pelo teste estatÃstico T de Student, mostrou valores semelhantes entre a densidade óssea da região retromolar e o degrau de número 16 da escala de alumÃnio (p>0,05). Concluiu-se que a densidade da escala de alumÃnio, utilizada neste estudo é semelhante a densidade óssea relativa da região avaliada, podendo ser utilizada como unidade de medida referencial na análise dos nÃveis de cinza mandibulares
Clinical diagnosis of hyposalivation in hospitalized patients
OBJECTIVE: The aim of this study was to evaluate the effectiveness of clinical criteria for the diagnosis of hyposalivation in hospitalized patients. MATERIAL AND METHODS: A clinical study was carried out on 145 subjects (48 males; 97 females; aged 20 to 90 years). Each subject was clinically examined, in the morning and in the afternoon, along 1 day. A focused anamnesis allowed identifying symptoms of hyposalivation, like xerostomia complaints (considered as a reference symptom), chewing difficulty, dysphagia and increased frequency of liquid intake. Afterwards, dryness of the mucosa of the cheecks and floor of the mouth, as well as salivary secretion during parotid gland stimulation were assessed during oral examination. RESULTS: Results obtained with Chi-square tests showed that 71 patients (48.9%) presented xerostomia complaints, with a significant correlation with all hyposalivation symptoms (p <0.05). Furthermore, xerostomia was also significantly correlated with all data obtained during oral examination in both periods of evaluation (p<0.05). CONCLUSION: Clinical diagnosis of hyposalivation in hospitalized patients is feasible and can provide an immediate and appropriate therapy avoiding further problems and improving their quality of life