39 research outputs found

    On the preparation and characterization of thin NiTi shape memory alloy wires for MEMS

    Get PDF
    Shape memory alloy (SMA) wires are employed as actuators in small devices for consumerelectronics, valves and automotive applications. Because of the continued miniaturization of all the industrialproducts, nowadays the tendency is to produce MEMS (micro electromechanical systems). Among the mostpromising functional MEMS materials, the thin SMA wires that are offering a rapid actuating response withhigh power/weigh ratio of the material, are attracting a world wide interest. This paper is aimed at showing theproduction process and the characterizations of thin NiTi shape memory wires. The activity was focused ondrawing procedure and on functional and TEM characterizations of the final products. In particular, it wasevaluated the performance of the SMA wires for actuators in terms of functional fatigue and thermo-mechanicalproperties by means of an experimental apparatus design ad hoc for these specific test

    Unravelling the specific site preference in doping of calcium hydroxyapatite with strontium from ab initio investigations and Rietveld analyses

    Get PDF
    Strontium can be substituted into the calcium sublattice of hydroxyapatite without a solubility limit. However, recent ab initio simulations carried out at 0 K report endothermic nature of this process. There is also striking discrepancy between experimentally observed preference of Sr doping at Ca-II sites and the first principles calculations, which indicate that a Ca-I site is preferred energetically for the Sr substitution. In this paper we combine insights from Density Functional Theory simulations and regular configurational entropy calculations to determine the site preference of Sr doping in the range of 0-100 at% at finite temperatures. In addition, samples of Sr-HA are synthesized and refinement of the relevant structural information provides benchmark information on the experimental unit cell parameters of Sr-HA. We find that the contribution of the entropy of mixing can efficiently overcome the endothermic excess energy at a temperature typical of the calcining step in the synthesis route of hydroxyapatite (700-950 degrees C). We observe that the most preferential substitution pattern is mixed substitution of Sr regardless of the concentration. For a wet chemical method, carried out at a moderate temperature (90 degrees C), the mixed doping is still slightly favourable at higher Sr-concentrations, except the range at 20% Sr, where Site II substitution is not restricted energetically and equally possible as the mixed doping. We observe a close correspondence between our theoretical results and available experimental data. Hence it should be possible to apply this theory to other divalent dopants in HA, such as Zn2+, Mg2+, Pb2+, Cu2+, Ba2+, Cd2+ etc

    On the preparation and characterization of thin NiTi shape memory alloy wires for MEMS

    Get PDF
    Shape memory alloy (SMA) wires are employed as actuators in small devices for consumer electronics, valves and automotive applications. Because of the continued miniaturization of all the industrial products, nowadays the tendency is to produce MEMS (micro electromechanical systems). Among the most promising functional MEMS materials, the thin SMA wires that are offering a rapid actuating response with high power/weigh ratio of the material, are attracting a world wide interest. This paper is aimed at showing the production process and the characterizations of thin NiTi shape memory wires. The activity was focused on drawing procedure and on functional and TEM characterizations of the final products. In particular, it was evaluated the performance of the SMA wires for actuators in terms of functional fatigue and thermo-mechanical properties by means of an experimental apparatus design ad hoc for these specific test

    On the preparation and characterization of thin NiTi shape memory alloy wires for MEMS

    Get PDF
    Shape memory alloy (SMA) wires are employed as actuators in small devices for consumer electronics, valves and automotive applications. Because of the continued miniaturization of all the industrial products, nowadays the tendency is to produce MEMS (micro electromechanical systems). Among the most promising functional MEMS materials, the thin SMA wires that are offering a rapid actuating response with high power/weigh ratio of the material, are attracting a world wide interest. This paper is aimed at showing the production process and the characterizations of thin NiTi shape memory wires. The activity was focused on drawing procedure and on functional and TEM characterizations of the final products. In particular, it was evaluated the performance of the SMA wires for actuators in terms of functional fatigue and thermo-mechanical properties by means of an experimental apparatus design ad hoc for these specific test

    Physically stimulated nanotheranostics for next generation cancer therapy: Focus on magnetic and light stimulations

    Full text link
    Physically or externally stimulated nanostructures often employ multimodality and show encouraging results at preclinical stage in cancer therapy. Specially designed smart nanostructures such as hybrid nanostructures are responsive to external physical stimuli such as light, magnetic field, electric, ultrasound, radio frequency, X-ray, etc. These physically responsive nanostructures have been widely explored as nonconventional innovative “nanotheranostics” in cancer therapies. Physically stimulated (particularly magnetic and light) nanotheranostics provide a unique combination of important properties to address key challenges in modern cancer therapy: (i) an active tumor targeting mechanism of therapeutic drugs driven by a physical force rather than passive antibody matching, (ii) an externally/remotely controlled drugs on-demand release mechanism, and (iii) a capability for advanced image guided tumor therapy and therapy monitoring. Although primarily addressed to the scientific community, this review offers valuable and accessible information for a wide range of readers interested in the current technological progress with direct relevance to the physics, chemistry, biomedical field, and theranostics. We herein cover magnetic and light-triggered modalities currently being developed for nonconventional cancer treatments. The physical basis of each modality is explained; so readers with a physics or, materials science background can easily grasp new developments in this field

    Mapping electron beam injected trapped charge with scattering scanning near-field optical microscopy

    Get PDF
    Scattering scanning near-field optical microscopy (s-SNOM) has been demonstrated as a valuable tool for mapping the optical and optoelectronic properties of materials with nanoscale resolution. Here we report experimental evidence that trapped electric charges injected by an electron beam at the surface of dielectric samples affect the sample-dipole interaction, which has direct impact on the s-SNOM image content. Nanoscale mapping of the surface trapped charge holds significant potential for the precise tailoring of the electrostatic properties of dielectric and semiconductive samples, such as hydroxyapatite, which has particular importance with respect to biomedical applications. The methodology developed here is highly relevant to semiconductor device fabrication as well

    Ferroelectricity in biological building blocks: Slipping on a banana peel?

    No full text
    Ferroelectricity in biological system has been anticipated both theoretically and experimentally over the past few decades. Claims of ferroelectricity in biological systems have given rise to confusion and methodological controversy. Over the years, a “loop” of induced polarization in response to a varying applied electrical field and a consequent polarization reversal has prompted many researchers to claim ferroelectricity in biological structures and their building blocks. Other observers were skeptical about the methodology adopted in generating the data and questioned the validity of the claimed ferroelectricity as such, “loop” can also be obtained from linear capacitors. In a paper with somewhat tongue-in-cheek title, Jim Scott showed that ordinary banana peels could exhibit closed loops of electrical charge which closely resemble and thus could be misinterpreted as ferroelectric hysteresis loops in barium sodium niobate, BNN paraphrasing it as “banana”. In this paper, we critically review ferroelectricity in biological system and argue that knowing the molecular and crystalline structure of biological building blocks and experimenting on such building blocks may be the way forward in revealing the “true” nature of ferroelectricity in biological systems
    corecore