Differential absorption and scattering sensitivity predictions

A set of general equations for evaluating the sensitivity of the Differential Absorption and Scattering (DAS) technique based upon a conventional analysis of statistical errors is derived. The equations are put in a proper form for evaluating total column density and range resolved concentration measurements of a variety of atmospheric species. The derived equation are subsequently used to analyze the sensitivity of DAS in three specific applications assuming realistic parameters for the optical and electronic components of proposed DAS systems. The three DAS applications evaluated are: (1) measurement of nitrogen at ground levels over a horizontal path; (2) measurement of atmospheric ozone depletion in the wake of a jet engine at 20 km altitude; and (3) measurements of the ozone distribution in the atmosphere from an orbiting space platform, in a downward viewing mode. The results of this study have shown that with reasonable laser energy and telescope receiver dimensions, DAS is capable of meeting requirements for performing these measurements

Acute care nurses' perceptions of barriers to using research information in clinical decision-making

Aim. To examine the barriers that nurses feel prevent them from using research in the decisions they make. Background. A sizeable research literature focusing on research utilization in nursing has developed over the past 20 years. However, this literature is characterized by a number of weaknesses: self-reported utilization behaviour; poor response rates and small, nonrandom sampling strategies. Design. Cross-case analysis involving anonymised qualitative interviews, observation, documentary audit and Q methodological modelling of shared subjectivities amongst nurses. The case sites were three large acute hospitals in the north of England. One hundred and eight nurses were interviewed, 61 of whom were also observed for a total of 180 h, and 122 nurses were involved in the Q modelling exercise (response rate of 64%). Results. Four perspectives were isolated that encompassed the characteristics associated with barriers to research use. These related to the individual, organization, nature of research information itself and environment. Nurses clustered around four main perspectives on the barriers to research use: (1) Problems in interpreting and using research products, which were seen as too complex, 'academic' and overly statistical; (2) Nurses who felt confident with research-based information perceived a lack of organizational support as a significant block; (3) Many nurses felt that researchers and research products lack clinical credibility and that they fail to offer the desired level of clinical direction; (4) Some nurses lacked the skills and, to a lesser degree, the motivation to use research themselves. These individuals liked research messages passed on to them by a third party and sought to foster others' involvement in research-based practice, rather than becoming directly involved themselves. Conclusions. Rejection of research knowledge is not a barrier to its application. Rather, the presentation and management of research knowledge in the workplace represent significant challenges for clinicians, policy-makers and the research community

Life assessment of combustor liner using unified constitutive models

Hot section components of gas turbine engines are subject to severe thermomechanical loads during each mission cycle. Inelastic deformation can be induced in localized regions leading to eventual fatigue cracking. Assessment of durability requires reasonably accurate calculation of the structural response at the critical location for crack initiation. In recent years nonlinear finite element computer codes have become available for calculating inelastic structural response under cyclic loading. NASA-Lewis sponsored the development of unified constitutive material models and their implementation in nonlinear finite element computer codes for the structural analysis of hot section components. These unified models were evaluated with regard to their effect on the life prediction of a hot section component. The component considered was a gas turbine engine combustor liner. A typical engine mission cycle was used for the thermal and structural analyses. The analyses were performed on a CRAY computer using the MARC finite element code. The results were compared with laboratory test results, in terms of crack initiation lives

A computer program for predicting nonlinear uniaxial material responses using viscoplastic models

A computer program was developed for predicting nonlinear uniaxial material responses using viscoplastic constitutive models. Four specific models, i.e., those due to Miller, Walker, Krieg-Swearengen-Rhode, and Robinson, are included. Any other unified model is easily implemented into the program in the form of subroutines. Analysis features include stress-strain cycling, creep response, stress relaxation, thermomechanical fatigue loop, or any combination of these responses. An outline is given on the theoretical background of uniaxial constitutive models, analysis procedure, and numerical integration methods for solving the nonlinear constitutive equations. In addition, a discussion on the computer program implementation is also given. Finally, seven numerical examples are included to demonstrate the versatility of the computer program developed

Origins of elastic properties in ordered nanocomposites

We predict a diblock copolymer melt in the lamellar phase with added spherical nanoparticles that have an affinity for one block to have a lower tensile modulus than a pure diblock copolymer system. This weakening is due to the swelling of the lamellar domain by nanoparticles and the displacement of polymer by elastically inert fillers. Despite the overall decrease in the tensile modulus of a polydomain sample, the shear modulus for a single domain increases dramatically

The accessibility of research-based knowledge for nurses in United Kingdom acute care settings

Background. The successful dissemination of the results of the National Health Service (NHS) research and development strategy and the development of evidence based approaches to health care rely on clinicians having access to the best available evidence; evidence fit for the purpose of reducing the uncertainties associated with clinical decisions. Aim. To reveal the accessibility of those sources of information actually used by nurses, as well as those which they say they use. Design. Mixed method case site, using interview, observational, Q sort and documentary audit data in medical, surgical and coronary care units (CCUs) in three acute hospitals. Results. Three perspectives on accessibility were identified: (a) the humanist-in which human sources of information were the most accessible; (b) local information for local needs-in which locally produced resources were seen as the most accessible and (c) moving towards technology-in which information technology begins to be seen as accessible. Nurses' experience in a clinical specialty is positively associated with a perception that human sources such clinical nurse specialists, link nurses, doctors and experienced clinical colleagues are more accessible than text based sources. Clinical specialization is associated with different approaches to accessing research knowledge. Coronary care unit nurses were more likely perceive local guidelines, protocols and on-line databases as more accessible than their counterparts in general medical and surgical wards. Only a third of text-based resources available to nurses oil the wards had any explicit research base. These, and the remainder were Out of date (mean age of textbooks 11 years), and authorship hard to ascertain. Conclusion. A strategy to increase the use of research evidence by nurses should harness the influence of clinical nurse specialists, link nurses and those engaged in practice development. These roles Could act as 'conduits' through which research-based messages for practice, and information for clinical decision making, could flow. This role should be explored and enhanced

Structural assessment of a space station solar dynamic heat receiver thermal energy storage canister

The structural performance of a space station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start up operating conditions was assessed. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes 188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically determined temperature was compared with that based on the experimentally measured temperature data

Aerobee 350, flight 17.03 GE - Instrumentation information and calibration data

Airborne instrumentation system on Aerobee 350 sounding rocke

UBV photometry of asteroid 433 Eros

UBV observations of asteroid 433 Eros were conducted on 17 nights during the winter of 1974/75. The peak-to-peak amplitude of the light curve varied from about 0.3 mag to nearly 1.4 mag. The absolute V magnitude, extrapolated to zero phase, is 10.85. Phase coefficients of 0.0245 mag/degree, 0.0009 mag/degree, and 0.0004 mag/degree were derived for V, B-V, and U-B, respectively. The zero-phase color of Eros (B-V = 0.88, U-B = 0.50) is representative of an S (silicaceous) compositional type asteroid. The color does not vary with rotation. The photometric behavior of Eros can be modeled by a cylinder with rounded ends having an axial ratio of about 2.3:1

HiRes deconvolution of Spitzer infrared images

Spitzer provides unprecedented sensitivity in the infrared (IR), but the spatial resolution is limited by a relatively small aperture (0.85 m) of the primary mirror. In order to maximize the scientific return it is desirable to use processing techniques which make the optimal use of the spatial information in the observations. We have developed a deconvolution technique for Spitzer images. The algorithm, "HiRes" and its implementation has been discussed by Backus et al. in 2005. Here we present examples of Spitzer IR images from the Infrared Array Camera (IRAC) and MIPS, reprocessed using this technique. Examples of HiRes processing include a variety of objects from point sources to complex extended regions. The examples include comparison of Spitzer deconvolved images with high-resolution Keck and Hubble Space Telescope images. HiRes deconvolution improves the visualization of spatial morphology by enhancing resolution (to sub-arcsecond levels in the IRAC bands) and removing the contaminating sidelobes from bright sources. The results thereby represent a significant improvement over previously-published Spitzer images. The benefits of HiRes include (a) sub-arcsec resolution (~0".6-0".8 for IRAC channels); (b) the ability to detect sources below the diffraction-limited confusion level; (c) the ability to separate blended sources, and thereby provide guidance to point-source extraction procedures; (d) an improved ability to show the spatial morphology of resolved sources. We suggest that it is a useful technique to identify features which are interesting enough for follow-up deeper analysis