Methanation of CO over Ni catalyst: A theoretical study

Theoretical methods (generalized valence‐bond calculations) were used to examine the bond energies and geometries of numerous species chemisorbed onto Ni clusters representing Ni surface. These results were used to obtain thermochemical information and to examine various mechanisms for the methanation of CO over Ni: CO+3H^(→)_(2(Ni)) CH_4+H_2O. It is found that chemisorbed formyl radicals (Ni–CHO) lead to a favorably appearing chain reaction that is consistent with current experimental results. In addition, we find a chemisorbed C_2 species that may be the catalytically active C_(ad) formed from dissociation of CO

Determination of the biologically active flavour substances thujone and camphor in foods and medicines containing sage (Salvia officinalis L.)

BACKGROUND: The sage plant Salvia officinalis L. is used as ingredient in foods and beverages as well as in herbal medicinal products. A major use is in the form of aqueous infusions as sage tea, which is legal to be sold as either food or medicine. Sage may contain two health relevant substances, thujone and camphor. The aim of this study was to develop and validate an analytical methodology to determine these active principles of sage and give a first overview of their concentrations in a wide variety of sage foods and medicines. RESULTS: A GC/MS procedure was applied for the analysis of α- and β-thujone and camphor with cyclodecanone as internal standard. The precision was between 0.8 and 12.6%, linearity was obtained from 0.1 - 80 mg/L. The recoveries of spiked samples were between 93.7 and 104.0% (average 99.1%). The time of infusion had a considerable influence on the content of analytes found in the teas. During the brewing time, thujone and camphor show an increase up to about 5 min, after which saturation is reached. No effect was found for preparation with or without a lid on the pot used for brewing the infusion. Compared to extracts with ethanol (60% vol), which provide a maximum yield, an average of 30% thujone are recovered in the aqueous tea preparations. The average thujone and camphor contents were 4.4 mg/L and 16.7 mg/L in food tea infusions and 11.3 mg/L and 25.4 mg/L in medicinal tea infusions. CONCLUSIONS: The developed methodology allows the efficient determination of thujone and camphor in a wide variety of sage food and medicine matrices and can be applied to conduct surveys for exposure assessment. The current results suggest that on average between 3 and 6 cups of sage tea could be daily consumed without reaching toxicological thresholds

An Automated Verification Workflow for Planned Lighting Setups using BIM

The use of Building Information Modeling (BIM) methods is becoming more and more established in the planning stage, during the construction, and for the management of buildings. Tailored BIM software packages allow to handle a vast amount of relevant aspects, but have so far not been covering specialized tasks like the evaluation of light distributions in and around a 3D model of a building. To overcome this limitation, we demonstrate the use of the open-source IFC format for preparing and exchanging BIM data to be used in our interactive light simulation system. By exploiting the availability of 3D data and semantic descriptions, it is possible to automatically place measurement surfaces in the 3D scene, and evaluate the suitability and sustainability of a planned lighting design according to given constraints and industry norms. Interactive visualizations for fast analysis of the simulation results, created using state-of-the-art web technologies, are seamlessly integrated in the 3D work environment, helping the lighting designer to quickly improve the initial lighting solution with a few clicks

Holistic Control of Herbal Teas and Tinctures Based on Sage (Salvia officinalis L.) for Compounds with Beneficial and Adverse Effects using NMR Spectroscopy

A methodology that utilizes 1H-NMR spectroscopy has been developed to simultaneously analyze toxic terpenes (thujone and camphor), major polyphenolic compounds, the total antioxidant capacity (ORAC) and the Folin-Ciocalteu (FC) index in foods and medicines containing sage. The quantitative determination of rosmarinic acid (limit of detection (LOD) = 10 mg/L) and total thujone (LOD = 0.35 mg/L) was possible using direct integration of the signals. For other parameters (derivatives of rosmarinic acid, carnosol and flavone glycosides, ORAC and FC index), chemometric regression models obtained separately for alcohol-based tinctures (R2 = 0.94–0.98) and aqueous tea infusions (R2 = 0.79–0.99) were suitable for screening analysis. The relative standard deviations for authentic samples were below 10%. The developed methodology was applied for the analysis of a wide variety of sage products (n = 108). The total thujone content in aqueous tea infusions was found to be in the range of not detectable (nd) to 37.5 mg/L (average 9.2 mg/L), while tinctures contained higher levels (range nd—409 mg/L, average 107 mg/L). The camphor content varied from 2.1 to 43.7 mg/L in aqueous infusions and from not detectable to 748 mg/L in tinctures (averages were 14.1 and 206 mg/L, respectively). Phenolic compounds were also detected in the majority of the investigated products. 1H-NMR spectroscopy was proven to have the ability to holistically control all important adverse and beneficial compounds in sage products in a single experiment, considerably saving time, resources and costs as NMR replaces four separate methodologies that were previously needed to analyze the same parameters

Feature-assisted interactive geometry reconstruction in 3D point clouds using incremental region growing

Reconstructing geometric shapes from point clouds is a common task that is often accomplished by experts manually modeling geometries in CAD-capable software. State-of-the-art workflows based on fully automatic geometry extraction are limited by point cloud density and memory constraints, and require pre- and post-processing by the user. In this work, we present a framework for interactive, user-driven, feature-assisted geometry reconstruction from arbitrarily sized point clouds. Based on seeded region-growing point cloud segmentation, the user interactively extracts planar pieces of geometry and utilizes contextual suggestions to point out plane surfaces, normal and tangential directions, and edges and corners. We implement a set of feature-assisted tools for high-precision modeling tasks in architecture and urban surveying scenarios, enabling instant-feedback interactive point cloud manipulation on large-scale data collected from real-world building interiors and facades. We evaluate our results through systematic measurement of the reconstruction accuracy, and interviews with domain experts who deploy our framework in a commercial setting and give both structured and subjective feedback.Comment: 13 pages, submitted to Computers & Graphics Journa

Radiation-Induced Cavernoma after Total Body Irradiation and Haematopoietic Stem Cell Transplantation in an Adult Patient Suffering from Acute Myeloid Leukaemia

Cerebral cavernomas are thin-walled vascular lesions composed of dilated capillary spaces. De novo formation of cavernomas after cerebral radiotherapy has been suspected since 1994. They are mostly seen in children after irradiation of brain tumours. Radiation dose and the developing juvenile brain are predisposing factors causing cavernomas. However, the underlying mechanisms are still far from being understood. In adults, radiation-induced cavernomas (RICs) usually occur 10 years after a high cumulative radiation dosage of >30 Gy. Here, we report a 45-year-old man with new-onset focal epileptic seizures caused by a haemorrhagic lesion noted on cerebral computed tomography scan. Brain MRI showed the typical appearance of a ruptured cavernoma. Of note, a cerebral MRI scan 5 years earlier showed no corresponding lesion. The patient had been treated with haematopoietic stem cell transplantation for acute myeloid leukaemia (AML) 16 years before. As part of this procedure, total body irradiation (TBI) consisting of 12 Gy was administered. According to the data from the literature, the typical delay from irradiation and a former normal brain MRI scan, we assume that our patient suffers from a RIC. To our knowledge, this is the first documented adult AML patient with a RIC treated with TBI. We aim to increase awareness among neurologists for the association of cranial irradiation or TBI and de novo cavernomas in patients suffering from malignant diseases

Radiation Driven Implosion and Triggered Star Formation

We present simulations of initially stable isothermal clouds exposed to ionizing radiation from a discrete external source, and identify the conditions that lead to radiatively driven implosion and star formation. We use the Smoothed Particle Hydrodynamics code SEREN (Hubber et al. 2010) and the HEALPix-based photoionization algorithm described in Bisbas et al. (2009). We find that the incident ionizing flux is the critical parameter determining the evolution: high fluxes simply disperse the cloud, whereas low fluxes trigger star formation. We find a clear connection between the intensity of the incident flux and the parameters of star formation.Comment: 4 pages, 2 figures, conference proceedings, IAU Symposium 270 (eds. Alves, Elmegreen, Girart, Trimble

Quantification of Mineral Oil Aromatic Hydrocarbons (MOAH) in Anhydrous Cosmetics Using 1 H NMR

In cosmetic products, hydrocarbons from mineral oil origin are used as ingredients in a wide variety of consistency, from liquid oil to solid wax. Refined mineral oil hydrocarbons consist of MOSH (mineral oil saturated hydrocarbons) and a low proportion of MOAH (mineral oil aromatic hydrocarbons). MOSH and MOAH comprise a variety of chemically similar single substances with straight or branched chains. In the context of precautionary consumer protection, it is crucial to determine hydrocarbons from mineral oil origin of inferior quality quickly and efficiently. This publication presents a rapid method for quantifying MOAH by proton nuclear magnetic resonance spectroscopy (¹H qNMR) in anhydrous cosmetics such as lipstick, lip gloss, and lip balm. A sample clean-up using solid-phase extraction (SPE) was developed for the complete removal of interfering aromatic substances to improve the robustness of the method for analysing compounded cosmetics. In preliminary trials using silica gel thin-layer chromatography, the retention behaviour of 21 common aromatic compounds was tested in eluents with different solvent strength including EtOAc, MeOH, cyclohexane, and dichloromethane. Based on these results, the SPE sample cleanup with silica gel and cyclohexane as an eluent was suggested as best suitable for the purpose. The SPE cleanup was successfully achieved for all tested potentially interfering aromatic cosmetic ingredients except for butylated hydroxytoluene. The recovery for lipophilic cosmetics is more than 80% based on naphthalene as calculation equivalent. Furthermore, a specific sample preparation for the examination of lipsticks was implemented. The SPE cleanup was validated, and the robustness of the method was tested on 57 samples from the retail trade. The ¹H qNMR method is a good complement to the LC-GC-FID method, which is predominantly used for the determination of MOSH and MOAH. Chromatographic problems such as migration of MOSH into the MOAH fraction during LC-GC-FID can be avoided