31 research outputs found
Cellulose-gold nanoparticle hybrid materials
Cellulose and gold nanoparticles have exciting characteristics and new combinations of both materials may lead to promising functional nanocomposites with unique properties. We have reviewed current research on cellulose-gold nanoparticle composite materials, and we present an overview of the preparation methods of cellulose-gold composite materials and discuss their applications. We start with the nanocomposite fabrication methods, covering in situ gold reduction, blending, and dip-coating methods to prepare gold-cellulose nanocomposite hybrids. We then move on to a discussion of the ensuing properties where the combination of gold nanoparticles with cellulose results in functional materials with specific catalytic, antimicrobial, sensing, antioxidant and Surface Enhanced Raman Scattering (SERS) performance. Studies have also been carried out on orientationally ordered composite materials and on the chiral nematic phase behaviour of these nanocomposites. To exert even more control over the structure formation and the resultant properties of these functional materials, fundamental studies on the physico-chemical interactions of cellulose and gold are necessary to understand better the driving forces and limitations towards structuring of gold-cellulose hybrid materials.status: publishe
The influence of combined track-structure response on the substructure of railway viaduct
The influence of combined track-structure response on the substructure of railway viaducts
Unravelling the Mechanism of Chitosan-Driven Flocculation of Microalgae in Seawater as a Function of pH
© 2018 American Chemical Society. Chitosan is a nontoxic biobased polymer, attractive for the flocculation-based harvesting of microalgae. While it is generally effective to harvest algae in freshwater medium, its performance in seawater has been unpredictable. This study determined the optimal conditions for flocculation of the marine microalgae Nannochloropsis oculata using chitosan. Whereas in freshwater a low pH (7.5). The dosage of chitosan required for flocculation of Nannochloropsis in seawater (75 mg/L) was higher than the reported dose to flocculate the freshwater microalgae (±10 mg/L) reported in the literature. Experiments carried out in synthetic seawater with modified magnesium concentration indicated that flocculation induced by chitosan at varying pH was not related to precipitation of magnesium hydroxides (so-called "autoflocculation"). Chitosan flocculation at high pH in seawater medium was found to be caused by precipitation of chitosan due to (partial) deprotonation of the amine groups, resulting in a sudden network formation that induces flocculation by a sweeping mechanism. Visual observations and viscosity measurements indeed confirmed the occurrence of precipitation of chitosan at pH > 7.5.status: publishe
Effect of Gelation on the Colloidal Deposition of Cellulose Nanocrystal Films
One of the most important aspects in controlling colloidal deposition is manipulating the homogeneity of the deposit by avoiding the coffee-ring effect caused by capillary flow inside the droplet during drying. After our previous work where we achieved homogeneous deposition of cellulose nanocrystals (CNCs) from a colloidal suspension by reinforcing Marangoni flow over the internal capillary flow (Gençer et al. Langmuir 2017, 33 (1), 228-234), we now set out to reduce the importance of capillary flow inside a drying droplet by inducing gelation. In this paper, we discuss the effect of gelation on the deposition pattern and on the self-assembly of CNCs during droplet drying. CNC films were obtained by drop casting CNC suspensions containing NaCl and CaCl2 salts. A mixed methodology using rheological and depolarized dynamic light scattering was applied to understand the colloidal behavior of the CNCs. In addition, analysis of the mixture's surface tension, viscosity, and yield stress of the suspensions were used to gain deeper insights into the deposition process. Finally, the understanding of the gelation behavior in the drying droplet was used to exert control over the deposit where the coffee-ring deposit can be converted to a dome-shaped deposit.status: publishe
Effect of Gelation on the Colloidal Deposition of Cellulose Nanocrystal Films
One of the most important aspects in controlling colloidal deposition is manipulating the homogeneity of the deposit by avoiding the coffee-ring effect caused by capillary flow inside the droplet during drying. After our previous work where we achieved homogeneous deposition of cellulose nanocrystals (CNCs) from a colloidal suspension by reinforcing Marangoni flow over the internal capillary flow (Gençer et al. Langmuir 2017, 33 (1), 228–234), we now set out to reduce the importance of capillary flow inside a drying droplet by inducing gelation. In this paper, we discuss the effect of gelation on the deposition pattern and on the self-assembly of CNCs during droplet drying. CNC films were obtained by drop casting CNC suspensions containing NaCl and CaCl2 salts. A mixed methodology using rheological and depolarized dynamic light scattering was applied to understand the colloidal behavior of the CNCs. In addition, analysis of the mixture’s surface tension, viscosity, and yield stress of the suspensions were used to gain deeper insights into the deposition process. Finally, the understanding of the gelation behavior in the drying droplet was used to exert control over the deposit where the coffee-ring deposit can be converted to a dome-shaped deposit
Thermodynamic Study of Ion-Driven Aggregation of Cellulose Nanocrystals
The thermodynamics of interactions between cations of the second group of the periodic table and differently negatively charged cellulose nanocrystals was investigated using isothermal titration calorimetry (ITC). The interaction of cations with the negatively charged CNCs was found to be endothermic and driven by an increase in entropy upon adsorption of the ions, due to an increase in degrees of freedom gained by the surface bound water upon ion adsorption. The effect was pH-dependent, showing an increase in enthalpy for cellulose suspensions at near-neutral pH (6.5) when compared to acidic pH (2). Sulfated cellulose nanoparticles were found to readily interact with divalent ions at both pH levels. The adsorption on carboxylate nanocrystals was found to be pH dependent, showing that the carboxylic group needs to be in the deprotonated form to interact with divalent ions. For the combined system (sulfate and carboxylate present at the same time), at neutral pH, the adsorption enthalpy was higher than the value obtained from cellulose nanocrystals containing a single functional group, while the association constant was higher due to an increased favorable entropic contribution. The higher entropic contribution indicates a more restricted surface-bound water layer when multiple functionalities are present. The stoichiometric number n was nearly constant for all systems, showing that the adsorption depends almost completely on the ion valency and on the amount of ionic groups on the CNC surface, independent of the type of functional group on the CNC surface as long as it is deprotonated. In addition, we showed that the reduction in Gibbs free energy drives the ionotropic gelation of nanocellulose suspensions, and we show that ITC is able to detect gel formation at the same time as determining the critical association concentration.status: publishe