Factores que afectan el ciclo de vida del producto en las empresas electrónicas: evidencia de un país emergente

Introduction:This paper is the product of the study “Factors affecting product life cycle in electronic enterprises – Evidence from an emerging country” developed at the Electric Power University and National Economics University between 2020 and 2022. Problem:The electronic manufacturing industry is increasingly developing in emerging markets and integrating into the global economy. The life cycle of electronic products is shorter and requires management.Objective:The paper aims to study factors that affect the product life cycle in Vietnamese electronic enterprises. The study helps managers in cost management. Methodology:The paper used a survey of non-probability sampling, and applied regression analysis to examine Vietnamese electronic enterprises. The analysis is done by SPSS and Smart PLS software. Results:The research results indicate that technology, consumer trends, and R&D are factors affecting product life cycle and post-sale service, and disposal has no impact on electronic products’ life cycle. This could be explained by the fact that electronic products are constantly updating and their life cycle is short, that post-sales service does not play a key role, and that waste treatment after sales is not taken seriously by manufacturers, customers, or other related parties. Conclusion:The results give some meaningful insights for electronics or other enterprises in Vietnam to use effective management of product life cycle. Originality:The results of this paper provide practical insights into the management of product life cycle and cost management of product life cycle for researchers and managers.Limitations:The research model should be expanded and the sample size increased to get an overview and greater insight.Introducción: Este artículo es producto del estudio “Factores que afectan el ciclo de vida del producto en empresas electrónicas – Evidencia de un país emergente” desarrollado en la Electric Power University y la National Economics University entre 2020 y 2022.Problema: La industria de fabricación electrónica se está desarrollando cada vez más en los mercados emer-gentes y se está integrando a la economía global. El ciclo de vida de los productos electrónicos es más corto y requiere gestión. Objetivo: El documento tiene como objetivo estudiar los factores que afectan el ciclo de vida del producto en las empresas electrónicas vietnamitas. El estudio ayuda a los gerentes en la gestión de costos. Metodología: El documento utilizó una encuesta de muestreo no probabilístico y aplicó un análisis de regresión para examinar las empresas electrónicas vietnamitas. El análisis se realiza mediante el software SPSS y Smart PLS. Resultados: Los resultados de la investigación indican que la tecnología, las tendencias de consumo y la I+D son factores que afectan el ciclo de vida del producto y el servicio postventa, y que el desecho no tiene impacto en el ciclo de vida de los productos electrónicos. Esto podría explicarse por el hecho de que los productos electrónicos se actualizan constantemente y su ciclo de vida es corto, que el servicio posventa no juega un papel clave y que el tratamiento de residuos posventa no es tomado en serio por los fabricantes, clientes u otras partes relacionadas. Conclusión: Los resultados brindan algunas ideas significativas para la electrónica u otras empresas en Vietnam para utilizar una gestión eficaz del ciclo de vida del producto. Originalidad: los resultados de este documento brindan información práctica sobre la gestión del ciclo de vida del producto y la gestión de costos del ciclo de vida del producto para investigadores y gerentes.Limitaciones: el modelo de investigación debe ampliarse y aumentar el tamaño de la muestra para obtener una visión general y una mayor comprensión

A Simple Procedure for Extraction of Surface Protein of Salmonella Serotypes and Escherichia coli Strains Isolated from Poultry and Pigs

Salmonella and E.coli possess different surface protein structures that can induce protective immune responses. Identification of these proteins capacitates development of diverse applications in prevention and diagnosis that contribute to effectively control disease-causing enterobacteria pathogens such as Salmonella and E.coli. A simple procedure for obtaining protein complexes of Salmonella serotypes and E.coli is performed in this study. A sonication process with heat treatment of whole bacteria induced the release of protein complexes. Concentration of the protein extract was quantified using protein quantification Kits-Rapid, and protein complex profile was obtained by SDS-PAGE (Sodium dodecyl sulfate polyacrylamide gel electrophoresis) and silver staining. The concentrations of protein ranged from 29.45 to 45.35 µg/mL in the  Salmonella protein extracts, and from 25.35 to 36.72 µg/mL in the E.coli protein extracts. Six major groups of proteins from E. coli (YfiO, NipB, OmpF, YfgL, Talc, YaeT) and four major groups of proteins from Salmonella (Flagellin, OmpA, Porin, SEF21) were preliminarily determined by a simple procedure of extraction based on the molecular weight

An investigation of the academic consulting competence of high school teachers in Vietnam

High school students must grapple with a host of issues and encounter difficulties when studying at schools, such as peer pressure, test anxiety, cyberbullying, unhealthy relationships, psychological distress, depression and possibly domestic issues. These obstacles create the need for academic consulting in order for high school students to develop essential skills and then solve problems. This study aims to examine the high school teachers' perceptions and the quality of academic consulting competence in the Vietnamese educational context. This study surveyed 1089 high school students and 289 teachers in Ha Noi and Ho Chi Minh City in Vietnam with the 43-item questionnaire. The main results showed that academic consulting competence had been noticed and trained professionally for high school teachers. Additionally, both students and high school teachers recognized the essential role of high school teachers' academic consulting competence in educational settings

A short review of fecal indicator bacteria in tropical aquatic ecosystems : knowledge gaps and future directions

Given the high numbers of deaths and the debilitating nature of diseases caused by the use of unclean water it is imperative that we have an understanding of the factors that control the dispersion of water borne pathogens and their respective indicators. This is all the more important in developing countries where significant proportions of the population often have little or no access to clean drinking water supplies. Moreover, and notwithstanding the importance of these bacteria in terms of public health, at present little work exists on the persistence, transfer and proliferation of these pathogens and their respective indicator organisms, e.g., fecal indicator bacteria (FIB) such as Escherichia coli and fecal coliforms in humid tropical systems, such as are found in South East Asia or in the tropical regions of Africa. Both FIB and the waterborne pathogens they are supposed to indicate are particularly susceptible to shifts in water flow and quality and the predicted increases in rainfall and floods due to climate change will only exacerbate the problems of contamination. This will be furthermore compounded by the increasing urbanization and agricultural intensification that developing regions are experiencing. Therefore, recognizing and understanding the link between human activities, natural process and microbial functioning and their ultimate impacts on human health are prerequisites for reducing the risks to the exposed populations. Most of the existing work in tropical systems has been based on the application of temperate indicator organisms, models and mechanisms regardless of their applicability or appropriateness for tropical environments. Here, we present a short review on the factors that control FIB dynamics in temperate systems and discuss their applicability to tropical environments. We then highlight some of the knowledge gaps in order to stimulate future research in this field in the tropics

Optimal design parameters of air suspension systems for semi-trailer truck. Part 2: results and discussion

Based on the results of model and algorithm in Part1 for searching the optimal design parameters of vehicle suspensions using genetic algorithm, in Part 2, the simulation results with MATLAB Simulink combined with an optimal program are written to search the optimal design parameters of vehicle air suspension systems in two optimal conditions. The optimal results indicate that the DLC values at all axles of vehicle respectively reduce by 9.09 %, 10.71 %, 11.11%, 10.81 %, 8.82 % (in Case 1) and 14.29 %, 19.23 %, 20.00 %, 17.14 %, 12.12 % (in Case 2) in comparison with the original air suspension systems when vehicle moves on the ISO class C road surface at v= 20 m/s and full load. All these things indicate that using the genetic algorithm optimization method does not only reduce the tire dynamic loads acting on road surface but also improves the ride comfort. Finally, the optimum performance of vehicle suspension systems is considered and reassessed under different operating conditions. The evaluation results indicate that the optimum performance of the air suspension systems has better potential to improve the road friendliness which provides a ride comfort for road surfaces and vehicle

Optimal design parameters of air suspension systems for semi-trailer truck. Part 1: modeling and algorithm

The purpose of this paper is to improve the performance of air suspension systems for a semi-trailer truck in the direction of reducing the dynamic wheel load acting on road surface (Part 1: modeling and algorithm). To achieve the goal of finding the optimal design parameters for the air suspension systems, a half-vehicle dynamic model under the road-vehicle interaction with 12 degrees of freedom (d.o.f) is established for searching the optimal design parameters of vehicle suspensions using genetic algorithm (GA). Dynamic load coefficient (DLC) is considered as a target function. Two optimal conditions: optimal design of geometrical parameters of air spring suspension systems (Case 1) and optimal design of parameters of air suspension systems (Case 2) are selected in this study. The results of this paper are the basis for optimization and discussion in Part 2 as the results and discussion

Nanoparticles as a control for cyanobacterial bloom

This study aims to investigate the toxicity of copper material synthesized by chemical reduction method and effects of environmental variables on growth of phytoplankton community (dominated by Microcystis genus) in the Tien eutrophic lake, Hanoi, Vietnam. The variables analyzed include: physical (pH and Turbidity), chemical (content of NH4+, PO43- and copper metal), biological (content of Chlorophyll-a, cell density). The characteristic of nanomaterial was confirmed by using UVvisible spectrophotometer, XRD, SEM and TEM methods. The CuNPs showed they spherical form and uniform size about 20-40 nm. The experimental results showed that the treated with CuNPs inhibition on growth against phytoplankton after 8 days. The cell density of phytoplankton community and Microcystis genus in samples exposure with CuNPs declined after 8 days from 647.037 and 467.037 down to 381.111 and 202.592, respectively.Mục đích của nghiên cứu này là khảo sát độc tính của vật liệu nano đồng được tổng hợp bằng phương pháp khử hóa học và ảnh hưởng của các yếu tố môi trường đến sinh trưởng và phát triển của quần xã thực vật nổi (chủ yếu là chi Microcystis) trong nước hồ Tiền phú dưỡng, tại Hà Nội, Việt Nam. Các thông số phân tích bao gồm: thủy lý (pH và độ đục), hóa học (hàm lượng amoni, photphat và hàm lượng đồng kim loại), sinh học (hàm lượng chất diệp lục, mật độ tế bào). Đặc trưng của vật liệu được xác định bằng các phương pháp quang phổ UV-VIS, XRD, SEM và TEM. Vật liệu nano đồng có dạng hình cầu, kích thước đồng nhất từ 20 đến 40 nm. Kết quả thử nghiệm sau 8 ngày cho thấy các mẫu có bổ sung vật liệu nano đồng ức chế sinh trưởng quần xã thực vật nổi ở nồng độ 1mg/l. Mật độ quần xã thực vật nổi và chi Microcystis trong mẫu xử lý với CuNPs đã giảm tương ứng sau 8 ngày từ 647.037 và 467.037 xuống còn 381.111 và 202.592

Factors affecting the creativity of high school students

Creativity is a vital personality quality of each individual. Each person has their potential for creativity, and it can be nurtured and developed in an appropriate and safe environment. The purpose of the study was to find out which factors from schools and students themselves affect creativity as well as the association between creativity and age, gender and giftedness of students, which then a basis to adjust and establish appropriate methods from schools, families, and students themselves to develop elements and their creativity. The study was conducted on 108 high school students in three grades from giftedness and non-giftedness schools. The data was collected through a survey method using a self-constructed questionnaire and drawing creativity test TCT-DP to determine students' creativity levels and personal information. The study's finding, which uses mathematical methods and one-way analysis of variance, reveals that factors affecting elements and creativity level are objective factors including education environment from school; behavior of teachers, and subjective factors including interests, perspectives, and thoughts of students. It was also found that there were no significant differences in the components of creativity and creativity among students in different grades, gender, and groups of giftedness schools