9,311 research outputs found

    Visual observations over oceans

    Get PDF
    Important factors in locating, identifying, describing, and photographing ocean features from space are presented. On the basis of crew comments and other findings, the following recommendations can be made for Earth observations on Space Shuttle missions: (1) flyover exercises must include observations and photography of both temperate and tropical/subtropical waters; (2) sunglint must be included during some observations of ocean features; (3) imaging remote sensors should be used together with conventional photographic systems to document visual observations; (4) greater consideration must be given to scheduling earth observation targets likely to be obscured by clouds; and (5) an annotated photographic compilation of ocean features can be used as a training aid before the mission and as a reference book during space flight

    Using a modified Hewlett Packard 8410 network analyzer as an automated farfield antenna range receiver

    Get PDF
    A Hewlett Packard 8410 Network Analyzer was modified to be used as an automated far-field antenna range receiver. By using external mixers, analog to digital signal conversion, and an external computer/controller, the HP8410 is capable of measuring signals as low as -110 dBm. The modified receiver is an integral part of an automated far-field range which features computer controlled test antenna positioning, system measurement parameters, and data acquisition, as well as customized measurement file management. The system described was assembled and made operational, taking advantage of off-the-shelf hardware available at minimal cost

    Population structure of chum salmon (Oncorhynchus keta) across the Pacific Rim, determined from microsatellite analysis

    Get PDF
    The Pacific Rim population structure of chum salmon (Oncorhynchus keta) was examined with a survey of microsatellite variation to describe the distribution of genetic variation and to evaluate whether chum salmon may have originated from two or more glacial refuges following dispersal to newly available habitat after glacial retreat. Variation at 14 microsatellite loci was surveyed for over 53,000 chum salmon sampled from over 380 localities ranging from Korea through Washington State. An index of genetic differentiation, FST, over all populations and loci was 0.033, with individual locus values ranging from 0.009 to 0.104. The most genetically diverse chum salmon were observed from Asia, particularly Japan, whereas chum salmon from the Skeena River and Queen Charlotte Islands in northern British Columbia and those from Washington State displayed the fewest number of alleles compared with chum salmon in other regions. Differentiation in chum salmon allele frequencies among regions and populations within regions was approximately 18 times greater than that of annual variation within populations. A regional structuring of populations was the general pattern observed, with chum salmon spawning in different tributaries within a major river drainage or spawning in smaller rivers in a geographic area generally more similar to each other than to populations in different major river drainages or geographic areas. Population structure of chum salmon on a Pacific Rim basis supports the concept of a minimum of two refuges, northern and southern, during the last glaciation, but four possible refuges fit better the observed distribution of genetic variation. The distribution of microsatellite variation of chum salmon on a Pacific Rim basis likely reflects the origins of salmon radiating from refuges after the last glaciation period

    Theoretical interpretation of scanning tunneling microscopy images: Application to the molybdenum disulfide family of transition metal dichalcogenides

    Get PDF
    We have performed ab initio quantum mechanical calculations to describe scanning tunneling microscopy (STM) images of MoS_2 and MoTe_2. These results indicate that the interpretation of the STM images of these and related materials depends sensitively on experimental conditions. For example, determining whether the maximum tunneling current correlates to the top atom (S or Te) or to the second‐layer atom (Mo) requires information on the tip‐sample separation. Based on these results we discuss some STM experimental procedures which would allow assignment of the chemical identity of STM spots with greater certainty

    Coastal oceanography and sedimentology in New Zealand, 1967-91.

    Get PDF
    This paper reviews research that has taken place on physical oceanography and sedimentology on New Zealand's estuaries and the inner shelf since c. 1967. It includes estuarine sedimentation, tidal inlets, beach morphodynamics, nearshore and inner shelf sedimentation, tides and coastal currents, numerical modelling, short-period waves, tsunamis, and storm surges. An extensive reference list covering both published and unpublished material is included. Formal teaching and research programmes dealing with coastal landforms and the processes that shape them were only introduced to New Zealand universities in 1964; the history of the New Zealand Journal of Marine and Freshwater Research parallels and chronicles the development of physical coastal science in New Zealand, most of which has been accomplished in last 25 years

    Payload Operations Control Center (POCC)

    Get PDF
    The Spacelab payload operations control center (POCC) timeline analysis program which is used to provide POCC activity and resource information as a function of mission time is described. This program is fully automated and interactive, and is equipped with tutorial displays. The tutorial displays are sufficiently detailed for use by a program analyst having no computer experience. The POCC timeline analysis program is designed to operate on the VAX/VMS version V2.1 computer system

    System overview on electromagnetic compensation for reflector antenna surface distortion

    Get PDF
    The system requirements and hardware implementation for electromagnetic compensation of antenna performance degradations due to thermal effects was investigated. Future commercial space communication antenna systems will utilize the 20/30 GHz frequency spectrum and support very narrow multiple beams (0.3 deg) over wide angle field of view (15-20 beamwidth). On the ground, portable and inexpensive very small aperture terminals (VSAT) for transmitting and receiving video, facsimile and data will be employed. These types of communication system puts a very stringent requirement on spacecraft antenna beam pointing stability (less than .01 deg), high gain (greater than 50 dB) and very lowside lobes (less than -25 dB). Thermal analysis performed on the advanced communication technology satellite (ACTS) has shown that the reflector surfaces, the mechanical supporting structures and metallic surfaces on the spacecraft body will distort due thermal effects from a varying solar flux. The antenna performance characteristics (e.g., pointing stability, gain, side lobe, etc.) will degrade due to thermal distortion in the reflector surface and supporting structures. Specifically, antenna RF radiation analysis has shown that pointing error is the most sensitive antenna performance parameter to thermal distortions. Other antenna parameters like peak gain, cross polarization level (beam isolation), and side lobe level will also degrade with thermal distortions. In order to restore pointing stability and in general antenna performance several compensation methods were proposed. In general these compensation methods can be classified as being either of mechanical or electromagnetic type. This paper will address only the later one. In this approach an adaptive phased array antenna feed is used to compensate for the antenna performance degradation. Extensive work has been devoted to demonstrate the feasibility of adaptive feed compensation on space communication antenna systems. This paper addresses the system requirements for such a system and identify candidate technologies (analog and digital) for possible hardware implementation

    Ohio Guide for Land Application of Sewage Sludge

    Get PDF
    PDF pages: 1

    Nature Versus Nurture: Luminous Blue Variable Nebulae in and near Massive Stellar Clusters at the Galactic Center

    Full text link
    Three Luminous Blue Variables (LBVs) are located in and near the Quintuplet Cluster at the Galactic Center: the Pistol star, G0.120-0.048, and qF362. We present imaging at 19, 25, 31, and 37 {\mu}m of the region containing these three LBVs, obtained with SOFIA using FORCAST. We argue that the Pistol and G0.120-0.048 are identical ``twins" that exhibit contrasting nebulae due to the external influence of their different environments. Our images reveal the asymmetric, compressed shell of hot dust surrounding the Pistol Star and provide the first detection of the thermal emission from the symmetric, hot dust envelope surrounding G0.120-0.048. Dust and gas composing the Pistol nebula are primarily heated and ionized by the nearby Quintuplet Cluster stars. The northern region of the Pistol nebula is decelerated due to the interaction with the high-velocity (2000 km/s) winds from adjacent Wolf-Rayet Carbon (WC) stars. With the DustEM code we determine that the Pistol nebula is composed of a distribution of very small, transiently-heated grains (10-~35 {\AA}) and that it exhibits a gradient of decreasing grain size from the south to the north due to differential sputtering by the winds from the WC stars. Dust in the G0.120-0.048 nebula is primarily heated by the central star; however, the nebular gas is ionized externally by the Arches Cluster. Unlike the Pistol nebula, the G0.120-0.048 nebula is freely expanding into the surrounding medium. Given independent dust and gas mass estimates we find that the Pistol and G0.120-0.048 nebulae exhibit similar gas-to-dust mass ratios of ~310 and ~290, respectively. Both nebulae share identical size scales (~ 0.7 pc) which suggests that they have similar dynamical timescales of ~10^5 yrs, assuming a shell expansion velocity of v_exp 60 km/s.Comment: 18 pages, 7 figures, accepted to Ap

    Dividing population genetic distance data with the software Partitioning Optimization with Restricted Growth Strings (PORGS): an application for Chinook salmon (Oncorhynchus tshawytscha), Vancouver Island, British Columbia

    Get PDF
    A new method of finding the optimal group membership and number of groupings to partition population genetic distance data is presented. The software program Partitioning Optimization with Restricted Growth Strings (PORGS), visits all possible set partitions and deems acceptable partitions to be those that reduce mean intracluster distance. The optimal number of groups is determined with the gap statistic which compares PORGS results with a reference distribution. The PORGS method was validated by a simulated data set with a known distribution. For efficiency, where values of n were larger, restricted growth strings (RGS) were used to bipartition populations during a nested search (bi-PORGS). Bi-PORGS was applied to a set of genetic data from 18 Chinook salmon (Oncorhynchus tshawytscha) populations from the west coast of Vancouver Island. The optimal grouping of these populations corresponded to four geographic locations: 1) Quatsino Sound, 2) Nootka Sound, 3) Clayoquot +Barkley sounds, and 4) southwest Vancouver Island. However, assignment of populations to groups did not strictly reflect the geographical divisions; fish of Barkley Sound origin that had strayed into the Gold River and close genetic similarity between transferred and donor populations meant groupings crossed geographic boundaries. Overall, stock structure determined by this partitioning method was similar to that determined by the unweighted pair-group method with arithmetic averages (UPGMA), an agglomerative clustering algorithm
    • 

    corecore