Survey of large circular and octagonal tanks operated at Norwegian commercial smolt and post-smolt sites

AbstractA survey was conducted to determine the geometry, operating parameters, and other key features of large circular or octagonal culture tanks used to produce Atlantic salmon smolt and post-smolt at six major Norwegian Atlantic salmon production companies. A total of 55 large tanks were reported at seven land-based hatchery locations, i.e., averaging 7.9 (range of 4–12) large tanks per land-based site. In addition, one 21,000m3 floating fiberglass tank in sea was reported. Culture volume ranged from 500 to 1300m3 for each land-based tank. Most tanks were circular, but one site used octagonal tanks. Land-based tank diameters ranged from 14.5 to 20m diameter, whereas the floating tank was 40m diameter. Maximum tank depths ranged from 3.5 to 4.5m at land-based facilities, which produced diameter-to-average-depth ratios of 3.6:1 to 5.5:1m:m. The floating tank was much deeper at 20m, with a diameter-to-average-depth ratio of only 2.4:1m:m. All land-based tanks had floors sloping at 4.0–6.5% toward the tank center and various pipe configurations that penetrated the culture tank water volume at tank center. These pipes and sloping floors were used to reduce labor when removing dead fish and harvesting fish.Maximum flow ranged from 3 to 19m3/min per land-based tank, with 400m3/min at the floating tank, but tank flow was adjustable at most facilities. Land-based tanks were flushed at a mean hydraulic retention time (HRT) of 35–170min. Maximum feed load on each land-based tank ranged from 525 to 850kg/day, but the floating tank reached 3700kg/day. Almost half of the large tanks reported in this survey were installed or renovated since 2013, including the three tank systems with the highest flow rate per tank (greater than 17.6m3/min). These more recent tanks were operated at more rapid tank HRT’s, i.e., from 34.8 to 52.5min, than the 67–170min HRT typical of the large tanks built before 2013. In addition, flow per unit of feed load in land-based tanks that began operating before 2010 were lower (19–30m3 flow/kg feed) than in tanks that began operating later (33–40m3 flow/kg feed). In comparison, the floating tank operates at a maximum daily tank flow to feed load of 160m3 flow/kg feed, which is the least intensive of all tanks surveyed. Survey results suggest that the recently built tanks have been designed to operate at a reduced metabolic loading per unit of flow, a tendency that would improve water quality throughout the culture tank, all else equal. This trend is possible due to the ever increasing application of water recirculating systems

The effects of nail rigidity on fracture healing in rats with osteoporosis

Background and purpose Stress shielding from rigid internal fixation may lead to refracture after removal of the osteosynthesis material. We investigated the effect of a low-rigidity (Ti-24Nb-4Zr-7.9Sn) intramedullary nail regarding stress shielding and bone healing of osteoporotic fractures in the rat

Proximal femoral resection arthroplasty for patients with cerebral palsy and dislocated hips: 20 patients followed for 1–6 years

Background and purpose Chronic hip dislocation in non-ambulatory individuals with cerebral palsy (CP) can lead to severe problems, of which pain is often the most severe. We studied the outcome of proximal femoral resection, especially regarding pain, sitting balance, perineal care, and patient satisfaction

Appointing Women to Boards: Is There a Cultural Bias?

Companies that are serious about corporate governance and business ethics are turning their attention to gender diversity at the most senior levels of business (Institute of Business Ethics, Business Ethics Briefing 21:1, 2011). Board gender diversity has been the subject of several studies carried out by international organizations such as Catalyst (Increasing gender diversity on boards: Current index of formal approaches, 2012), the World Economic Forum (Hausmann et al., The global gender gap report, 2010), and the European Board Diversity Analysis (Is it getting easier to find women on European boards? 2010). They all lead to reports confirming the overall relatively low proportion of women on boards and the slow pace at which more women are being appointed. Furthermore, the proportion of women on corporate boards varies much across countries. Based on institutional theory, this study hypothesizes and tests whether this variation can be attributed to differences in cultural settings across countries. Our analysis of the representation of women on boards for 32 countries during 2010 reveals that two cultural characteristics are indeed associated with the observed differences. We use the cultural dimensions proposed by Hofstede (Culture’s consequences: International differences in work-related values, 1980) to measure this construct. Results show that countries which have the greatest tolerance for inequalities in the distribution of power and those that tend to value the role of men generally exhibit lower representations of women on boards

Entrepreneurs’ age, institutions, and social value creation goals: a multi-country study

This study explores the relationship between an entrepreneur's age and his/her social value creation goals. Building on the lifespan developmental psychology literature and institutional theory, we hypothesize a U-shaped relationship between entrepreneurs’ age and their choice to create social value through their ventures, such that younger and older entrepreneurs create more social value with their businesses while middle age entrepreneurs are relatively more economically and less socially oriented with their ventures. We further hypothesize that the quality of a country’s formal institutions in terms of economic, social, and political freedom steepen the U-shaped relationship between entrepreneurs’ age and their choice to pursue social value creation as supportive institutional environments allow entrepreneurs to follow their age-based preferences. We confirm our predictions using multilevel mixed-effects linear regressions on a sample of over 15,000 entrepreneurs (aged between 18 and 64 years) in 45 countries from Global Entrepreneurship Monitor data. The findings are robust to several alternative specifications. Based on our findings, we discuss implications for theory and practice, and we propose future research directions

Reproducibility of different screening classifications in ultrasonography of the newborn hip

<p>Abstract</p> <p>Background</p> <p>Ultrasonography of the hip has gained wide acceptance as a primary method for diagnosis, screening and treatment monitoring of developmental hip dysplasia in infants. The aim of the study was to examine the degree of concordance of two objective classifications of hip morphology and subjective parameters by three investigators with different levels of experience.</p> <p>Methods</p> <p>In 207 consecutive newborns (101 boys; 106 girls) the following parameters were assessed: bony roof angle (α-angle) and cartilage roof angle (β-angle) according to Graf's basic standard method, "femoral head coverage" (FHC) as described by Terjesen, shape of the bony roof and position of the cartilaginous roof. Both hips were measured twice by each investigator with a 7.5 MHz linear transducer (SONOLINE G60S^®ultrasound system, SIEMENS, Erlangen, Germany).</p> <p>Results</p> <p>Mean kappa-coefficients for the subjective parameters shape of the bony roof (0.97) and position of the cartilaginous roof (1.0) demonstrated high intra-observer reproducibility. Best results were achieved for α-angle, followed by β-angle and finally FHC. With respect to limits of agreement, inter-observer reproducibility was calculated less precisely.</p> <p>Conclusions</p> <p>Higher measurement differences were evaluated more in objective scorings. Those variations were observed by every investigator irrespective of level of experience.</p

Axial forces and bending moments in the loaded rabbit tibia in vivo

<p>Abstract</p> <p>Background</p> <p>Different animal models are used as fracture models in orthopaedic research prior to implant use in humans, although biomechanical forces can differ to a great extend between species due to variable anatomic conditions, particularly with regard to the gait. The rabbit is an often used fracture model, but biomechanical data are very rare. The objective of the present study was to measure axial forces, bending moments, and bending axis directly in the rabbit tibia <it>in vivo</it>. The following hypothesis was tested: Axial forces and bending moments in the mid-diaphysis of rabbit tibia differ from other experimental animals or indirectly calculated data.</p> <p>Methods</p> <p>A minifixateur system with 4 force sensors was developed and attached to rabbit tibia (<it>n </it>= 4), which were subsequently ostectomised. Axial forces, bending moments and bending angles were calculated telemetrically during weight bearing in motion between 6 and 42 days post operation.</p> <p>Results</p> <p>Highest single values were 201% body weight [% bw] for axial forces and 409% bw cm for bending moments. Whereas there was a continous decrease in axial forces over time after day 10 (<it>P </it>= 0.03 on day 15), a decrease in bending moments was inconsistent (<it>P </it>= 0.03 on day 27). High values for bending moments were frequently, but not consistently, associated with high values for axial forces.</p> <p>Conclusion</p> <p>Axial forces in rabbit tibia exceeded axial forces in sheep, and differed from indirectly calculated data. The rabbit is an appropriate fracture model because axial loads and bending moments in rabbit tibia were more closely to human conditions than in sheep tibia as an animal model.</p

Assessing the Factorial Validity of the Attitudes and Belief Scale 2-Abbreviated Version: A Call for the Development a Gold Standard Method of Measuring Rational and Irrational Beliefs

Rational Emotive Behaviour Therapy (REBT) does not possess a measure of rational and irrational beliefs that meets internationally recognised standards for acceptable psychometric properties. Without such a measure the theory/practice of REBT cannot be rigorously evaluated, thus undermining its scientific veracity. The current study investigates the validity and reliability of a recently developed measure of rational and irrational beliefs: the Attitudes and Belief Scale 2-Abbreviated Version (ABS-2-AV). University students from three countries completed the ABS-2-AV (N = 397). An alternative models framework using confirmatory factor analysis indicated that a theoretically consistent eight-factor model of the ABS-2-AV provided the best fit of the data. A number of post-hoc modifications were required in order to achieve acceptable model fit results, and these modifications revealed important methodological limitations with the ABS-2-AV. Results indicated that the validity of the ABS-2-AV was undermined due to items measuring both the psychological process of interest (rational and irrational beliefs) and the context in which these beliefs processes are presented. This is a serious methodological limitation of the ABS-2 and all questionnaires derived from it, including the ABS-2-AV. This methodological limitation resulted in the ABS-2-AV possessing poor internal reliability. These limitations are discussed in relation to the broader REBT literature and the impact such problems have on research and practice. A call is made for REBT researchers to come together to develop a “gold standard” method of assessing rational and irrational beliefs that meets international standard for psychometric excellence