Melting of alloys along the inter-phase boundaries in eutectic and peritectic systems

We discuss a simple model of the melting kinetics along the solid-solid interface in eutectic and peritectic systems. The process is controlled by the diffusion inside the liquid phase and the existence of a triple junction is crucial for the velocity selection problem. Using the lubrication approximation for the diffusion field in the liquid phase we obtain scaling results for the steady-state velocity of the moving pattern depending on the overheating above the equilibrium temperature and on the material parameters of the system, including the dependences on the angles at the triple junction

Onsager approach to 1D solidification problem and its relation to phase field description

We give a general phenomenological description of the steady state 1D front propagation problem in two cases: the solidification of a pure material and the isothermal solidification of two component dilute alloys. The solidification of a pure material is controlled by the heat transport in the bulk and the interface kinetics. The isothermal solidification of two component alloys is controlled by the diffusion in the bulk and the interface kinetics. We find that the condition of positive-definiteness of the symmetric Onsager matrix of interface kinetic coefficients still allows an arbitrary sign of the slope of the velocity-concentration line near the solidus in the alloy problem or of the velocity-temperature line in the case of solidification of a pure material. This result offers a very simple and elegant way to describe the interesting phenomenon of a possible non-single-value behavior of velocity versus concentration which has previously been discussed by different approaches. We also discuss the relation of this Onsager approach to the thin interface limit of the phase field description.Comment: 5 pages, 1 figure, submitted to Physical Review

Velocity selection problem for combined motion of melting and solidification fronts

We discuss a free boundary problem for two moving solid-liquid interfaces that strongly interact via the diffusion field in the liquid layer between them. This problem arises in the context of liquid film migration (LFM) during the partial melting of solid alloys. In the LFM mechanism the system chooses a more efficient kinetic path which is controlled by diffusion in the liquid film, whereas the process with only one melting front would be controlled by the very slow diffusion in the mother solid phase. The relatively weak coherency strain energy is the effective driving force for LFM. As in the classical dendritic growth problems, also in this case an exact family of steady-state solutions with two parabolic fronts and an arbitrary velocity exists if capillary effects are neglected. We develop a velocity selection theory for this problem, including anisotropic surface tension effects. The strong diffusion interaction and coherency strain effects in the solid near the melting front lead to substantial changes compared to classical dendritic growth.Comment: submitted to PR

Differential carrier lifetime in oxide-confined vertical cavity lasers obtained from electrical impedance measurements

Includes bibliographical references (page 901).Differential carrier lifetime measurements were performed on index-guided oxide-confined vertical cavity surface emitting lasers operating at 980 nm. Lifetimes were extracted from laser impedance measurements at subthreshold currents, with device size as a parameter, using a simple small-signal model. The carrier lifetimes ranged from 21 ns at 9 µA, to about 1 ns at a bias close to threshold. For a 6 × 6 µm2 oxide aperture device the threshold carrier density was nth ~ 2 × 1018cm-3. The effect of carrier diffusion was also considered. An ambipolar diffusion coefficient of D ~ 11 cm2s-1 was obtained.Work at Texas Tech is supported by BMDO (monitored by Lou Lome), DARPA, and the J. F. Maddox Foundation

Simulations of three-dimensional dendritic growth using a coupled thermo-solutal phase-field model

Using a phase field model, which fully couples the thermal and solute concentration field, we present simulation results in three dimensions of the rapid dendritic solidification of a class of dilute alloys at the meso scale. The key results are the prediction of steady state tip velocity and radius at varying undercooling and thermal diffusivities. Less computationally demanding 2-dimensional results are directly compared with the corresponding 3-dimensional results, where significant quantitative differences emerge. The simulations provide quantitative predictions for the range of thermal and solutal diffusivities considered and show the effectiveness and potential of the computational techniques employed. These results thus provide benchmark 3-dimensional computations, allow direct comparison with underlying analytical theory, and pave the way for further quantitative results

Experimental results for a 1.5 MW, 110 GHz gyrotron oscillator with reduced mode competition

A new result from a 110 GHz gyrotron at MIT is reported with an output power of 1.67 MW and an efficiency of 42% when operated at 97 kV and 41 A for 3 mu s pulses in the TE22,6 mode. These results are a major improvement over results obtained with an earlier cavity design, which produced 1.43 MW of power at 37% efficiency. These new results were obtained using a cavity with a reduced output taper angle and a lower ohmic loss when compared with the earlier cavity. The improved operation is shown experimentally to be the result of reduced mode competition from the nearby TE19,7 mode. The reduced mode competition agrees well with an analysis of the startup scenario based on starting current simulations. The present results should prove useful in planning long pulse and CW versions of the 110 GHz gyrotron.open141

Electron exchange model potential: Application to positronium-helium scattering

The formulation of a suitable nonlocal model potential for electron exchange is presented, checked with electron-hydrogen and electron-helium scattering, and applied to the study of elastic and inelastic scattering and ionization of ortho positronium (Ps) by helium. The elastic scattering and the $n = 2$ excitations of Ps are investigated using a three-Ps-state close-coupling approximation. The higher ($n\ge 3$) excitations and ionization of Ps atom are treated in the framework of Born approximation with present exchange. Calculations are reported of phase shifts, and elastic, Ps-excitation, and total cross sections. The present target elastic total cross section agrees well with experimental results at thermal to medium energies.Comment: 16 latex pages, 7 postscript figure