88,492 research outputs found
Ku-band field-effect power transistors
A single stage amplifier was developed using an 8 gate, 1200 micrometer width device to give a gain of 3.3 + or - 0.1 dB over the 14.4 to 15.4 GHz band with an output power of 0.48 W and 15% minimum efficiency with 0.255 W of input power. With two 8 gate devices combined and matched on the device carrier, using a lumped element format, a gain of 3 dB was attained over the 14.5 to 15.5 GHz band with a maximum efficiency of 9.9% for an output power of 0.8 W
Workshop on Moon in Transition: Apollo 14, KREEP, and Evolved Lunar Rocks
Lunar rocks provide material for analyzing lunar history and now new evaluation procedures are available for discovering new information from the Fra Mauro highlands rocks, which are different from any other lunar samples. These and other topics were discussed at this workshop, including a new evaluation of the nature and history of KREEP, granite, and other evolved lunar rock types, and ultimately a fresh evaluation of the transition of the moon from its early anorthosite-forming period to its later stages of KREEPy, granitic, and mare magmatism. The summary of presentations and discussion is based on notes taken by the respective summarizers during the workshop
Biological Monitoring of the Capsule Mechanical Training Model During Assembly in the Sterilization Assembly Development Laboratory
Microbial burden sterilization assembly procedure development using rigorous monitoring progra
Method and apparatus for producing microshells
A method is described for forming hollow particles, or shells, of extremely small size. The shell material is heated to a molten temperature in the presence of a gas that is at least moderately soluble in the shell material, to form a solution of the molten shell material and the soluble gas. The solution is atomized to form a multiplicity of separate droplets that are cooled while in free fall. Cooling of a droplet from the outside traps the desolved gas and forces it to form a gas bubble at the center of the droplet which now forms a gas filled shell. The shell is reheated and then cooled in free fall, in an environment having a lower pressure than the gas pressure in the shell. This causes expansion of the shell and the formation of a shell having a small wall thickness compared to its diameter
Observation of hydrogen and helium ions during a period of rising solar activity
Latitudinal variations in H and He ion distribution in upper ionosphere observed by OGO 2 and 4 satellites during rising solar activit
Changes of partitioning and increased root lengths of spruce and beech exposed to ambient pollution concentrations in southern England
International audienc
Finite Size Effects in the Anisotropic \lambda/4!(\phi^4_1 + \phi^4_2)_d Model
We consider the model on a
d-dimensional Euclidean space, where all but one of the coordinates are
unbounded. Translation invariance along the bounded coordinate, z, which lies
in the interval [0,L], is broken because of the boundary conditions (BC's)
chosen for the hyperplanes z=0 and z=L. Two different possibilities for these
BC's boundary conditions are considered: DD and NN, where D denotes Dirichlet
and N Newmann, respectively. The renormalization procedure up to one-loop order
is applied, obtaining two main results. The first is the fact that the
renormalization program requires the introduction of counterterms which are
surface interactions. The second one is that the tadpole graphs for DD and NN
have the same z dependent part in modulus but with opposite signs. We
investigate the relevance of this fact to the elimination of surface
divergences.Comment: 33 pages, 2 eps figure
Flame Instability and Transition to Detonation in Supersonic Reactive Flows
Multidimensional numerical simulations of a homogeneous, chemically reactive
gas were used to study ignition, flame stability, and
deflagration-to-detonation transition (DDT) in a supersonic combustor. The
configuration studied was a rectangular channel with a supersonic inflow of
stoichiometric ethylene-oxygen and a transimissive outflow boundary. The
calculation is initialized with a velocity in the computational domain equal to
that of the inflow, which is held constant for the duration of the calculation.
The compressible reactive Navier-Stokes equations were solved by a high-order
numerical algorithm on an adapting mesh. This paper describes two calculations,
one with a Mach 3 inflow and one with Mach 5.25. In the Mach 3 case, the
fuel-oxidizer mixture does not ignite and the flow reaches a steady-state
oblique shock train structure. In the Mach 5.25 case, ignition occurs in the
boundary layers and the flame front becomes unstable due to a Rayleigh-Taylor
instability at the interface between the burned and unburned gas. Growth of the
reaction front and expansion of the burned gas compress and preheat the
unburned gas. DDT occurs in several locations, initiating both at the flame
front and in the unburned gas, due to an energy-focusing mechanism. The growth
of the flame instability that leads to DDT is analyzed using the Atwood number
parameter
A theoretical model of the ionosphere dynamics with interhemispheric coupling
Dynamic model for ionospheric plasma with interhemispheric couplin
Preparing the foundations for video-based, practice-placement support: establishing the role from a students’ perspective
Currently, many placement-based health programme students within the UK are supported through face-to-face visits from university staff. Whilst cited in literature as being of value, the face-to-face nature of this contact is not supported. Alternatives including video-based communications methods offer the potential for cost effective, environmentally responsible support. However, in order to establish the fitness for purpose of alternative approaches, the content and purpose of current support needs to be understood. This project aimed to investigate student perceptions of the ideal content and purpose of clinical support visits, and alternatives to the current face-to-face approach. Fifty-six Physiotherapy undergraduate students responded to questionnaires with a further nine participating in a follow-up focus group. Participants emphasised the value of the visit in guiding learning, ensuring progression and resolving arising issues, and highlighted concerns over alternative approaches. Focus group participants discussed the importance of personal and professional confidence in directing requirements for support, and went on to propose a menu of options for methods of communication.Whilst limited in some applications, video technologies may be one of the options. Overall, however, this project supports the need for consideration of individualised learning journeys within curriculum planning
- …