4,673 research outputs found
Magnetic anisotropy in hole-doped superconducting Ba 0.67K 0.33Fe 2As2 probed by polarized inelastic neutron scattering
We use polarized inelastic neutron scattering (INS) to study spin excitations
of optimally hole-doped superconductor BaKFeAs
( K).
In the normal state, the imaginary part of the dynamic susceptibility,
, shows magnetic anisotropy for energies below
7 meV with c-axis polarized spin excitations larger than that of the
in-plane component. Upon entering into the superconducting state, previous
unpolarized INS experiments have shown that spin gaps at 5 and 0.75 meV
open at wave vectors and , respectively, with a
broad neutron spin resonance at meV. Our neutron polarization analysis
reveals that the large difference in spin gaps is purely due to different spin
gaps in the c-axis and in-plane polarized spin excitations, resulting resonance
with different energy widths for the c-axis and in-plane spin excitations. The
observation of spin anisotropy in both opitmally electron and hole-doped
BaFeAs is due to their proximity to the AF ordered BaFeAs where
spin anisotropy exists below .Comment: 5 pages, 4 figure
Rupture of the profunda femoris artery in a patient with alcoholic liver disease: a case report
Introduction: Profunda femoris artery aneurysms are rare and often present with rupture. However, to the best of our knowledge, rupture of a non-aneurismal profunda femoris artery has never been reported before.
Case presentation: We report the case of a 31-year-old Caucasian man with alcoholic liver disease who presented with rupture of the profunda femoris artery following blunt trauma which was treated by endovascular embolization.
Conclusion: Coagulopathy secondary to alcoholic liver disease is a major contributory factor and a high index of suspicion of vascular injury must be attached to such patients following blunt trauma. Although there have no previous documented cases, treatment by endovascular embolization appears to be effective and safe
An integrated asset performance framework for operational buildings – preliminary results of focused group validations in Hong Kong and Australia
Author name used in this publication: Then, Danny Shiem-shinRefereed conference paper2004-2005 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe
Brief intervention to promote smoking cessation and improve glycemic control in smokers with type 2 diabetes: a randomized controlled trial
published_or_final_versio
Distinguishing and electron pairing symmetries by neutron spin resonance in superconducting NaFeCoAs
A determination of the superconducting (SC) electron pairing symmetry forms
the basis for establishing a microscopic mechansim for superconductivity. For
iron pnictide superconductors, the -pairing symmetry theory predicts the
presence of a sharp neutron spin resonance at an energy below the sum of hole
and electron SC gap energies () below . On the other hand,
the -pairing symmetry expects a broad spin excitation enhancement at an
energy above below . Although the resonance has been observed in
iron pnictide superconductors at an energy below consistent with the
-pairing symmetry, the mode has also be interpreted as arising from the
-pairing symmetry with due to its broad energy width and
the large uncertainty in determining the SC gaps. Here we use inelastic neutron
scattering to reveal a sharp resonance at E=7 meV in SC
NaFeCoAs ( K). On warming towards , the mode
energy hardly softens while its energy width increases rapidly. By comparing
with calculated spin-excitations spectra within the and
-pairing symmetries, we conclude that the ground-state resonance in
NaFeCoAs is only consistent with the -pairing, and
is inconsistent with the -pairing symmetry.Comment: 9 pages, 8 figures. submitted to PR
A logic-based representation and tree-based visualization method for building regulatory requirements
HATS-13b and HATS-14b: two transiting hot Jupiters from the HATSouth survey
We report the discovery of HATS-13b and HATS-14b, two hot-Jupiter transiting
planets discovered by the HATSouth survey. The host stars are quite similar to
each other (HATS-13: V = 13.9 mag, M* = 0.96 Msun, R* = 0.89 Rsun, Teff = 5500
K, [Fe/H] = 0.05; HATS-14: V = 13.8 mag, M* = 0.97 Msun, R* = 0.93 Rsun, Teff =
5350 K, [Fe/H] = 0.33) and both the planets orbit around them with a period of
roughly 3 days and a separation of roughly 0.04 au. However, even though they
are irradiated in a similar way, the physical characteristics of the two
planets are very different. HATS-13b, with a mass of Mp = 0.543 MJ and a radius
of Rp = 1.212 RJ, appears as an inflated planet, while HATS-14b, having a mass
of Mp = 1.071 MJ and a radius of Rp = 1.039 RJ, is only slightly larger in
radius than Jupiter.Comment: 13 pages, 7 figures, Submitted to Astronomy & Astrophysics. arXiv
admin note: text overlap with arXiv:1503.0006
Disk and outflow signatures in Orion-KL: The power of high-resolution thermal infrared spectroscopy
We used the CRIRES spectrograph on the VLT to study the ro-vibrational
12CO/13CO, the Pfund beta and H2 emission between 4.59 and 4.72mu wavelengths
toward the BN object, the disk candidate source n, and a proposed dust density
enhancement IRC3. We detected CO absorption and emission features toward all
three targets. Toward the BN object, the data partly confirm the results
obtained more than 25 years ago by Scoville et al., however, we also identify
several new features. While the blue-shifted absorption is likely due to
outflowing gas, toward the BN object we detect CO in emission extending in
diameter to ~3300AU. Although at the observational spectral resolution limit,
the 13CO line width of that feature increases with energy levels, consistent
with a disk origin. If one attributes the extended CO emission also to a disk
origin, its extent is consistent with other massive disk candidates in the
literature. For source n, we also find the blue-shifted CO absorption likely
from an outflow. However, it also exhibits a narrower range of redshifted CO
absorption and adjacent weak CO emission, consistent with infalling motions. We
do not spatially resolve the emission for source n. For both sources we conduct
a Boltzmann analysis of the 13CO absorption features and find temperatures
between 100 and 160K, and H2 column densities of the order a few times
10^23cm^-2. The observational signatures from IRC3 are very different with only
weak absorption against a much weaker continuum source. However, the CO
emission is extended and shows wedge-like position velocity signatures
consistent with jet-entrainment of molecular gas, potentially associated with
the Orion-KL outflow system. We also present and discuss the Pfund beta and H2
emission in the region.Comment: 12 pages, 15 pages, accepted for A&A, you find a high-resolution copy
at http://www.mpia-hd.mpg.de/homes/beuther/papers.htm
Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics
Molecular dynamics simulations using tight-binding many body potential are carried out to study the roller imprint process of a gold single crystal. The effect of the roller tooth’s taper angle, imprint depth, imprint temperature, and imprint direction on the imprint force, adhesion, stress distribution, and strain are investigated. A two-stage roller imprint process was obtained from an imprint force curve. The two-stage imprint process included the imprint forming with a rapid increase of imprint force and the unloading stage combined with the adhesion stage. The results show that the imprint force and adhesion rapidly increase with decreasing taper angle and increasing imprint depth. The magnitude of the maximum imprint force and the time at which this maximum occurs are proportional to the imprint depth, but independent of the taper angle. In a comparison of the imprint mechanisms with a vertical imprint case, while high stress and strain regions are concentrated below the mold for vertical imprint, they also occur around the mold in the case of roller imprint. The regions were only concentrated on the substrate atoms underneath the mold in vertical imprint. Plastic flow increased with increasing imprint temperature
Estimation of unsaturated hydraulic conductivity of granular soils from particle size parameters
Estimation of unsaturated hydraulic conductivity could benefit many engineering or research problems such as water flow in the vadose zone, unsaturated seepage and capillary barriers for underground waste isolation. The unsaturated hydraulic conductivity of a soil is related to its saturated hydraulic conductivity value as well as its water retention behaviour. By following the first author's previous work, the saturated hydraulic conductivity and water retention curve (WRC) of sandy soils can be estimated from their basic gradation parameters. In this paper, we further suggest the applicable range of the estimation method is for soils with d10 > 0.02mm and Cu < 20, in which d10 is the grain diameter corresponding to 10% passing and Cu is the coefficient of uniformity (Cu= d60/d10). The estimation method is also modified to consider the porosity variation effect. Then the proposed method is applied to predict unsaturated hydraulic conductivity properties of different sandy soils and also compared with laboratory and field test results. The comparison shows that the newly developed estimation method, which predicts the relative permeability of unsaturated sands from basic grain size parameters and porosity, generally has a fair agreement with measured data. It also indicates that the air-entry value is mainly relative to the mean grain size and porosity value change from the intrinsic value. The rate of permeability decline with suction is mainly associated with grain size polydispersity
- …