9,650 research outputs found
Shock associated noise reduction from inverted-velocity-profile coannular jets
Acoustic measurements show that the shock noise from the outer stream is virtually eliminated when the inner stream is operated at a Mach number just above unity, regardless of all the other jet operating conditions. At this optimum condition, the coannular jet provides the maximum noise reduction relative to the equivalent single jet. The shock noise reduction can be achieved at inverted-as well as normal-velocity-profile conditions, provided the coannular jet is operated with the inner stream just slightly supersonic. Analytical models for the shock structure and shock noise are developed indicate that a drastic change in the outer stream shock cell structure occurs when the inner stream increases its velocity from subsonic to supersonic. At this point, the almost periodic shock cell structure of the outer stream nearly completely disappears the noise radiated is minimum. Theoretically derive formulae for the peak frequencies and intensity scaling of shock associated noise are compared with the measured results, and good agreement is found for both subsonic and supersonic inner jet flows
Analytical developments for definition and prediction of USB noise
A systematic acoustic data base and associated flow data are used in identifying the noise generating mechanisms of upper surface blown flap configurations of short takeoff and landing aircraft. Theory is developed for the radiated sound field of the highly sheared flow of the trailing edge wake. An empirical method is also developed using extensive experimental data and physical reasonings to predict the noise levels
Coronal heating in multiple magnetic threads
Context. Heating the solar corona to several million degrees requires the
conversion of magnetic energy into thermal energy. In this paper, we
investigate whether an unstable magnetic thread within a coronal loop can
destabilise a neighbouring magnetic thread. Aims. By running a series of
simulations, we aim to understand under what conditions the destabilisation of
a single magnetic thread can also trigger a release of energy in a nearby
thread. Methods. The 3D magnetohydrodynamics code, Lare3d, is used to simulate
the temporal evolution of coronal magnetic fields during a kink instability and
the subsequent relaxation process. We assume that a coronal magnetic loop
consists of non-potential magnetic threads that are initially in an equilibrium
state. Results. The non-linear kink instability in one magnetic thread forms a
helical current sheet and initiates magnetic reconnection. The current sheet
fragments, and magnetic energy is released throughout that thread. We find
that, under certain conditions, this event can destabilise a nearby thread,
which is a necessary requirement for starting an avalanche of energy release in
magnetic threads. Conclusions. It is possible to initiate an energy release in
a nearby, non-potential magnetic thread, because the energy released from one
unstable magnetic thread can trigger energy release in nearby threads, provided
that the nearby structures are close to marginal stability
Advances in Numerical Boundary Conditions for Computational Aeroacoustics
Advances in Computational Aeroacoustics (CAA) depend critically on the availability of accurate, nondispersive, least dissipative computation algorithm as well as high quality numerical boundary treatments. This paper focuses on the recent developments of numerical boundary conditions. In a typical CAA problem, one often encounters two types of boundaries. Because a finite computation domain is used, there are external boundaries. On the external boundaries, boundary conditions simulating the solution outside the computation domain are to be imposed. Inside the computation domain, there may be internal boundaries. On these internal boundaries, boundary conditions simulating the presence of an object or surface with specific acoustic characteristics are to be applied. Numerical boundary conditions, both external or internal, developed for simple model problems are reviewed and examined. Numerical boundary conditions for real aeroacoustic problems are also discussed through specific examples. The paper concludes with a description of some much needed research in numerical boundary conditions for CAA
Benchmark problems and solutions
The scientific committee, after careful consideration, adopted six categories of benchmark problems for the workshop. These problems do not cover all the important computational issues relevant to Computational Aeroacoustics (CAA). The deciding factor to limit the number of categories to six was the amount of effort needed to solve these problems. For reference purpose, the benchmark problems are provided here. They are followed by the exact or approximate analytical solutions. At present, an exact solution for the Category 6 problem is not available
Theoretical aspects of supersonic jet noise
The topics covered include the following: the three components of supersonic jet noise; shock cell structure of imperfectly expanded jets; large turbulence structures/instability waves; supersonic jet noise theory; generation of turbulent mixing noise; comparisons between predicted peak noise frequency and direction of radiation with measurements; Strouhal number of maximum SPL of hot supersonic jets; near field sound pressure level contours; generation of broadband shock associated noise; calculated and measured far field shock noise spectra; generation of screech tones; and calculated and measured Strouhal number of screech tones
Tone-excited jet: Theory and experiments
A detailed study to understand the phenomenon of broadband jet-noise amplification produced by upstream discrete-tone sound excitation has been carried out. This has been achieved by simultaneous acquisition of the acoustic, mean velocity, turbulence intensities, and instability-wave pressure data. A 5.08 cm diameter jet has been tested for this purpose under static and also flight-simulation conditions. An open-jet wind tunnel has been used to simulate the flight effects. Limited data on heated jets have also been obtained. To improve the physical understanding of the flow modifications brought about by the upstream discrete-tone excitation, ensemble-averaged schlieren photographs of the jets have also been taken. Parallel to the experimental study, a mathematical model of the processes that lead to broadband-noise amplification by upstream tones has been developed. Excitation of large-scale turbulence by upstream tones is first calculated. A model to predict the changes in small-scale turbulence is then developed. By numerically integrating the resultant set of equations, the enhanced small-scale turbulence distribution in a jet under various excitation conditions is obtained. The resulting changes in small-scale turbulence have been attributed to broadband amplification of jet noise. Excellent agreement has been found between the theory and the experiments. It has also shown that the relative velocity effects are the same for the excited and the unexcited jets
Numerical Simulation of the Generation of Axisymmetric Mode Jet Screech Tones
An imperfectly expanded supersonic jet, invariably, radiates both broadband noise and discrete frequency sound called screech tones. Screech tones are known to be generated by a feedback loop driven by the large scale instability waves of the jet flow. Inside the jet plume is a quasi-periodic shock cell structure. The interaction of the instability waves and the shock cell structure, as the former propagates through the latter, is responsible for the generation of the tones. Presently, there are formulas that can predict the tone frequency fairly accurately. However, there is no known way to predict the screech tone intensity. In this work, the screech phenomenon of an axisymmetric jet at low supersonic Mach number is reproduced by numerical simulation. The computed mean velocity profiles and the shock cell pressure distribution of the jet are found to be in good agreement with experimental measurements. The same is true with the simulated screech frequency. Calculated screech tone intensity and directivity at selected jet Mach number are reported in this paper. The present results demonstrate that numerical simulation using computational aeroacoustics methods offers not only a reliable way to determine the screech tone intensity and directivity but also an opportunity to study the physics and detailed mechanisms of the phenomenon by an entirely new approach
- …