462 research outputs found
Trapping of Neutral Mercury Atoms and Prospects for Optical Lattice Clocks
We report a vapor-cell magneto-optical trapping of Hg isotopes on the
intercombination transition. Six abundant isotopes, including
four bosons and two fermions, were trapped. Hg is the heaviest non-radioactive
atom trapped so far, which enables sensitive atomic searches for ``new
physics'' beyond the standard model. We propose an accurate optical lattice
clock based on Hg and evaluate its systematic accuracy to be better than
. Highly accurate and stable Hg-based clocks will provide a new
avenue for the research of optical lattice clocks and the time variation of the
fine-structure constant.Comment: 4 pages, 3 figure
Distant metastasis facilitated by BCG: spread of tumour cells injected in the BCG-primed site.
Tumour metastasis in BCG-pretreated mice was studied using a methylcholanthrene-induced fibrosarcoma in C3H/He mice. When tumour cells were injected into the BCG-primed site, distant metastasis occurred in the lungs and the popliteal lymph node, through this tumour did not metastasize in normal mice. Such metastases were increased in proportion to the number of tumour cells injected into the BCG-primed site, and developed soon after tumour challenge. Concomitant immunity developed well in the mice bearing such metastases, but did not inhibit metastatic growth. Experiments using 125I-labelled SRBC or tumour cells revealed that such cells egressed rapidly from the BCG-primed site. When the tumour was inoculated into the contralateral foot to the BCG-primed site, the incidence and the number of metastases was reduced. Furthermore, BCG infection induced an increase of platelet count. I.v. injection of this tumour induced marked thrombocytopenia in normal mice. Administration of pentoxifylline, a methylxanthine derivative before tumour challenge reduced such metastases. These findings suggest that the changes in peripheral blood, such as increased platelet count and increased release of tumour cells from the injection site, facilitated distant metastasis in BCG-pretreated mice
Measuring the frequency of a Sr optical lattice clock using a 120-km coherent optical transfer
We demonstrate a precision frequency measurement using a phase-stabilized
120-km optical fiber link over a physical distance of 50 km. The transition
frequency of the 87Sr optical lattice clock at the University of Tokyo is
measured to be 429228004229874.1(2.4) Hz referenced to international atomic
time (TAI). The measured frequency agrees with results obtained in Boulder and
Paris at a 6*10^-16 fractional level, which matches the current best
evaluations of Cs primary frequency standards. The results demonstrate the
excellent functions of the intercity optical fibre link, and the great
potential of optical lattice clocks for use in the redefinition of the second.Comment: 14 pages, 3 figure
Fc receptor gamma-chain, a constitutive component of the IL-3 receptor, is required for IL-3-induced IL-4 production in basophils
ArticleNATURE IMMUNOLOGY. 10(2):214-222 (2009)journal articl
Recovery of Electron/Proton Radiation-Induced Defects in n+p AlInGaP Solar Cell by Minority-Carrier Injection Annealing
A high efficient In0.48Ga0.52P/In0.01Ga0.99As/Ge triple junction solar cell has been developed for application in space and terrestrial concentrator PV system [1-3]. Recently, a high conversion efficiency of 31.5% (AM1.5G) has been obtained in InGaP/(In)GaAs/Ge triple junction solar cell, and as a new top cell material of triple junction cells, (Al)InGaP [1] has been proposed to improve the open-circuit voltage (Voc) because it shows a higher Voc of 1.5V while maintaining the same short-circuit current (ISC) as a conventional InGaP top cell under AM1.5G conditions as seen in figure 1 (a). Moreover, the spectral response of 1.96eV AlInGaP cell with a thickness of 2.5..m shows a higher response in the long wavelength region, compared with that of 1.87eV InGaP cell with 0.6..m thickness, as shown in figure 1 (b). Its development will realize next generation multijunction (MJ) solar cells such as a lattice mismatched AlInGaP/InGaAs/Ge 3-junction and lattice matched AlInGaP/GaAs/InGaAsN/Ge 4-junction solar cells. Figure 2 shows the super high-efficiency MJ solar cell structures and wide band spectral response by MJ solar cells under AM1.5G conditions. For realizing high efficient MJ space solar cells, the higher radiation-resistance under the electron or proton irradiation is required. The irradiation studies for a conventional top cell InGaP have been widely done [4-6], but little irradiation work has been performed on AlInGaP solar cells. Recently, we made the first reports of 1 MeV electron or 30 keV proton irradiation effects on AlInGaP solar cells, and evaluated the defects generated by the irradiation [7,8]. The present study describes the recovery of 1 MeV electron / 30 keV proton irradiation-induced defects in n+p- AlInGaP solar cells by minority-carrier injection enhanced annealing or isochronal annealing. The origins of irradiation-induced defects observed by deep level transient spectroscopy (DLTS) measurements are discussed
Possibility of an ultra-precise optical clock using the transition in Yb atoms held in an optical lattice
We report calculations designed to assess the ultimate precision of an atomic
clock based on the 578 nm transition in Yb atoms
confined in an optical lattice trap. We find that this transition has a natural
linewidth less than 10 mHz in the odd Yb isotopes, caused by hyperfine
coupling. The shift in this transition due to the trapping light acting through
the lowest order AC polarizability is found to become zero at the magic trap
wavelength of about 752 nm. The effects of Rayleigh scattering, higher-order
polarizabilities, vector polarizability, and hyperfine induced electronic
magnetic moments can all be held below a mHz (about a part in 10^{18}), except
in the case of the hyperpolarizability larger shifts due to nearly resonant
terms cannot be ruled out without an accurate measurement of the magic
wavelength.Comment: 4 pages, 1 figur
p35, the non-cyclin activator of Cdk5, protects podocytes against apoptosis in vitro and in vivo
Cyclin-dependent kinase-5 is widely expressed and predominantly regulated by the non-cyclin activator p35. Since we recently showed that expression of p35 in the kidney is restricted to podocytes, we examined here its function in mice in which p35 was genetically deleted. The mice did not exhibit kidney abnormalities during glomerular development or during adult life. Conditionally immortalized cultured podocytes, derived from these null mice, did not have any change in their morphology, differentiation, or proliferation. However, when these cultured podocytes were exposed to UV-C irradiation, serum depletion, puromycin aminonucleoside, or transforming growth factor-β-1, they showed increased apoptosis compared to those from wild-type mice. Levels of Bcl-2 were decreased in these null podocytes but increased after transduction with human p35. Restoration of p35 or the ectopic expression of Bcl-2 reduced the susceptibility of p35-null podocytes to apoptosis. Experimental glomerulonephritis, characterized by podocyte apoptosis and subsequent crescent formation, was utilized to test these findings in vivo. Podocyte apoptosis was significantly increased in diseased p35-null compared with wild-type mice, accompanied by increased glomerulosclerosis and decreased renal function. Our study shows that p35 does not affect glomerulogenesis but controls podocyte survival following injury, in part, by regulating Bcl-2 expression
Characterization of the absolute frequency stability of an individual reference cavity
We demonstrated for the first time the characterization of absolute frequency
stability of three reference cavities by cross beating three laser beams which
are independently locked to these reference cavities. This method shows the
individual feature of each reference cavity, while conventional beatnote
measurement between two cavities can only provide an upper bound. This method
allows for numerous applications such as optimizing the performance of the
reference cavity for optical clockwork.Comment: 3 figures, 9 page
A high stability semiconductor laser system for a Sr-based optical lattice clock
We describe a frequency stabilized diode laser at 698 nm used for high
resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the
laser stabilization we use state-of-the-art symmetrically suspended optical
cavities optimized for very low thermal noise at room temperature. Two-stage
frequency stabilization to high finesse optical cavities results in measured
laser frequency noise about a factor of three above the cavity thermal noise
between 2 Hz and 11 Hz. With this system, we demonstrate high resolution remote
spectroscopy on the 88Sr clock transition by transferring the laser output over
a phase-noise-compensated 200 m-long fiber link between two separated
laboratories. Our dedicated fiber link ensures a transfer of the optical
carrier with frequency stability of 7 \cdot 10^{-18} after 100 s integration
time, which could enable the observation of the strontium clock transition with
an atomic Q of 10^{14}. Furthermore, with an eye towards the development of
transportable optical clocks, we investigate how the complete laser system
(laser+optics+cavity) can be influenced by environmental disturbances in terms
of both short- and long-term frequency stability.Comment: 9 pages, 9 figures, submitted to Appl. Phys.
A surface-patterned chip as a strong source of ultracold atoms for quantum technologies
Laser-cooled atoms are central to modern precision measurements. They are also increasingly important as an enabling technology for experimental cavity quantum electrodynamics, quantum information processing and matter–wave interferometry. Although significant progress has been made in miniaturizing atomic metrological devices, these are limited in accuracy by their use of hot atomic ensembles and buffer gases. Advances have also been made in producing portable apparatus that benefits from the advantages of atoms in the microkelvin regime. However, simplifying atomic cooling and loading using microfabrication technology has proved difficult. In this Letter we address this problem, realizing an atom chip that enables the integration of laser cooling and trapping into a compact apparatus. Our source delivers ten thousand times more atoms than previous magneto-optical traps with microfabricated optics and, for the first time, can reach sub-Doppler temperatures. Moreover, the same chip design offers a simple way to form stable optical lattices. These features, combined with simplicity of fabrication and ease of operation, make these new traps a key advance in the development of cold-atom technology for high-accuracy, portable measurement devices
- …