Water Management Strategies on Campus: An integrated approach

Water resource management strategies at National Pingtung University of Science and Technology (NPUST) are orientated towards water conservation, efficient water use and wastewater reuse. Ground water is the main water source on the university campus and the affiliated Tajen and Baoli experimental forest farms. To promote ground water collection from surface runoff water, permeable pavement, and multiple ponds have been installed. To achieve efficient water use, less efficient appliances have incrementally been replaced by more water-efficient ones. This has proven to be a feasible and effective way to achieve goals without bringing about inconveniences to campus users. Drought-tolerant trees have been planted and drip irrigation systems utilized on campus farms to save water. Our water reuse strategies aim to achieve a fully-recycling, zero emission water treatment system. Treated domestic sewage, swimming pool water and harvested rainwater are reused for flushing toilets or watering plants. Many facilities on campus, such as the Laifu Garden, Jingsi Lake, Green Park, Yingxia Lake, and Tajen Forest Farm, are more than just beautiful scenic spots; they all play major parts in the circular water ecosystem.Keyword: Water management, water conservation, water recycling, wastewater treatmen

Design of optimally smoothing multi-stage schemes for the Euler equations

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76080/1/AIAA-1989-1933-802.pd

Simplified ZrTiOx-based RRAM cell structure with rectifying characteristics by integrating Ni/n + -Si diode

A simplified one-diode one-resistor (1D1R) resistive switching memory cell that uses only four layers of TaN/ZrTiO( x )/Ni/n(+)-Si was proposed to suppress sneak current where TaN/ZrTiO( x )/Ni can be regarded as a resistive-switching random access memory (RRAM) device while Ni/n(+)-Si acts as an Schottky diode. This is the first RRAM cell structure that employs metal/semiconductor Schottky diode for current rectifying. The 1D1R cell exhibits bipolar switching behavior with SET/RESET voltage close to 1 V without requiring a forming process. More importantly, the cell shows tight resistance distribution for different states, significantly rectifying characteristics with forward/reverse current ratio higher than 10(3) and a resistance ratio larger than 10(3) between two states. Furthermore, the cell also displays desirable reliability performance in terms of long data retention time of up to 10(4) s and robust endurance of 10(5) cycles. Based on the promising characteristics, the four-layer 1D1R structure holds the great potential for next-generation nonvolatile memory technology

Design of optimally smoothing multistage schemes for the euler equations

A recently derived local preconditioning of the Euler equations is shown to be useful in developing multistage schemes suited for multigrid use. The effect of the preconditioning matrix on the spatial Euler operator is to equalize the characteristic speeds. When applied to the discretized Euler equations, the preconditioning has the effect of strongly clustering the operator's eigenvalues in the complex plane. This makes possible the development of explicit marching schemes that effectively damp most high‐frequency Fourier modes, as desired in multigrid applications. The technique is the same as developed earlier for scalar convection schemes: placement of the zeros of the amplification factor of the multistage scheme in locations where eigenvalues corresponding to high‐frequency modes abound.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/111971/1/1630081006_ftp.pd

Reliability of flexible low temperature poly-silicon thin film transistor

This work reports the effect of mechanical stress-induced degradation in flexible low-temperature polycrystalline-silicon thin-film transistors. After 100,000 iterations of channel-width-direction mechanical compression at R=2mm, a significant shift of extracted threshold voltage and an abnormal hump at the subthreshold region were found. Simulation reveals that both the strongest mechanical stress and electrical field takes place at both sides of the channel edge, between the polycrystalline silicon and gate insulator. The gate insulator suffered from a serious mechanical stress and result in a defect generation in the gate insulator. The degradation of the threshold voltage shift and the abnormal hump can be ascribed to the electron trapping in these defects. In addition, this work introduced three methods to reduce the degradation cause by the mechanical stress, including the quality improvement of the gate insulator, organic trench structure and active layer with a wing structure. Please click Additional Files below to see the full abstract

ACCURACY OF 3D CBCT PRINTED MODELS

Objectives: To determine the accuracy of three-dimensional (3D) printed models fabricated from cone-beam computed tomography (CBCT) scans of human mandibular dry skulls in comparison with models derived from intraoral scanner (IOS) data. Materials and Methods: Six human mandibular dry skulls were scanned by IOS and CBCT. Digital models (DMs) constructed from the IOS and CBCT data were fabricated physically using a 3D printer. The width and thickness of individual teeth and intercanine and molar widths were measured using a digital caliper. The accuracy of the DMs was compared between IOS and CBCT. Paired t-tests were used for intergroup comparisons. Results: All intraclass correlation coefficient values for the three measurements (mesial-distal, buccal-lingual, width) exceeded 0.9. For the mandibular teeth, there were significant discrepancies in model accuracy between the IOS (average discrepancies of 0.18 ± 0.08 mm and 0.16 ± 0.12 mm for width and thickness, respectively) and CBCT (0.28 ± 0.07 mm for width, 0.37 ± 0.2 mm for thickness; P < .01). Intercanine (P = .38) and molar widths (P = .41) showed no significant difference between groups. Conclusions: There was a statistically significant difference in the accuracy of DMs obtained from CBCT and IOS; however, this did not seem to result in any important clinical difference. CBCT could be routinely used as an orthodontic diagnostic tool and for appliance construction

Optimal multistage schemes for Euler equations with residual smoothing

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76583/1/AIAA-12860-858.pd

Natural Product Chemistry of Gorgonian Corals of Genus Junceella—Part II

The structures, names, bioactivities, and references of 81 new secondary metabolites obtained from gorgonian corals belonging to the genus Junceella are described in this review. All compounds mentioned in this review were obtained from sea whip gorgonian corals Junceella fragilis and Junceella juncea, collected from the tropical and subtropical Indo-Pacific Ocean

Cladielloides A and B: New Eunicellin-Type Diterpenoids from an Indonesian Octocoral Cladiella sp

Two new eunicellin-type diterpenoids, cladielloides A (1) and B (2), which were found to possess a 2-hydroxybutyroxy group in their structures, were isolated from an Indonesian octocoral identified as Cladiella sp. The structures of eunicellins 1 and 2 were elucidated by spectroscopic methods. Cladielloide B (2) exhibited moderate cytotoxicity toward CCRF-CEM tumor cells and this compound displayed significant inhibitory effects on superoxide anion generation and elastase release by human neutrophils

Leukocyte Cell-Derived Chemotaxin 2 Retards Non-Small Cell Lung Cancer Progression Through Antagonizing MET and EGFR Activities

Background/Aims: Epidermal growth factor receptor (EGFR)-tyrosine kinase inhibitor (TKI) therapy is a clinical option for non-small cell lung cancer (NSCLC) harboring activating EGFR mutations or for cancer with wild-type (WT) EGFR when chemotherapy has failed. MET receptor activation or MET gene amplification was reported to be a major mechanism of acquired resistance to EGFR-TKI therapy in NSCLC cells. Leukocyte cell-derived chemotaxin 2 (LECT2) is a multifunctional cytokine that was shown to suppress metastasis of hepatocellular carcinoma via inhibiting MET activity. Until now, the biological function responsible for LECT2’s action in human NSCLC remains unclear. Methods: LECT2-knockout (KO) mice and NOD/SCID/IL2rgnull (NSG) mice were respectively used to investigate the effects of LECT2 on the tumorigenicity and metastasis of murine (Lewis lung carcinoma, LLC) and human (HCC827) lung cancer cells. The effect of LECT2 on in vitro cell proliferation was evaluated, using MTS and colony formation assays. The effect of LECT2 on cell motility was evaluated using transwell migration and invasion assays. An enzyme-linked immunosorbent assay was performed to detect secreted LECT2 in plasma and media. Co-immunoprecipitation and Western blot assays were used to investigate the underlying mechanisms of LECT2 in NSCLC cells. Results: Compared to WT mice, mice with LECT2 deletion exhibited enhanced growth and metastasis of LLC cells, and survival times decreased in LLC-implanted mice. Overexpression of LECT2 in orthotopic human HCC827 xenografts in NSG mice resulted in significant inhibition of tumor growth and metastasis. In vitro, overexpression of LECT2 or treatment with a recombinant LECT2 protein impaired the colony-forming ability and motility of NSCLC cells (HCC827 and PC9) harboring high levels of activated EGFR and MET. Mechanistic investigations found that LECT2 bound to MET and EGFR to antagonize their activation and further suppress their common downstream pathways: phosphatidylinositol 3-kinase/Akt and extracellular signal-regulated kinase. Conclusion: EGFR-MET signaling is critical for aggressive behaviors of NSCLC and is recognized as a therapeutic target for NSCLC especially for patients with acquired resistance to EGFR-TKI therapy. Our findings demonstrate, for the first time, that LECT2 functions as a suppressor of the progression of NSCLC by targeting EGFR-MET signaling