Reliability Evaluation considering Structures of a Large Scale Wind Farm

Wind energy is one of the most widely used renewable energy resources. Wind power has been connected to the grid as large scale wind farm which is made up of dozens of wind turbines, and the scale of wind farm is more increased recently. Due to intermittent and variable wind source, reliability evaluation on wind farm is necessarily required. Also, because large scale offshore wind farm has a long repair time and a high repair cost as well as a high investment cost, it is essential to take into account the economic aspect. One of methods to efficiently build and to operate wind farm is to construct wind farm which is able to enhance a capability of delivering a power instead of controlling an uncontrollable output of wind power. Therefore, this paper introduces a method to evaluate the reliability depending upon structures of wind farm and to reflect the result to the planning stage of wind farm

Frequency Control for Island Operation of Bornholm Power System

AbstractThis paper presents a coordinated control strategy of a battery energy storage system (BESS) and distributed generation (DG) units for the island operation of the Danish island of Bornholm. The Bornholm power system is able to transit from the grid connected operation with the Nordic power system to the isolated island operation. In order to ensure the secure island operation, the coordinated control of the BESS and the DG has been proposed to stabilize the frequency of the system after the transition to the island operation. In the proposed coordinate control scheme, the BESS is used to provide the primary frequency control and the DG units are used to provide the secondary frequency control. As such, the proposed control scheme can strike a balance of the frequency control speed and the energy used from the BESS for the frequency control support. The real-time model of the Bornholm power system was used to carry out case studies using real time digital simulator (RTDS) to illustrate the performance of the coordinated control strategy. Case study results show that the proposed control strategy can efficiently help stabilize the frequency under different conditions

Sequential Star Formation in the filamentary structures of Planck Galactic cold clump G181.84+0.31

We present a multi-wavelength study of the Planck cold clump G181.84+0.31, which is located at the northern end of the extended filamentary structure S242. We have extracted 9 compact dense cores from the SCUBA-2 850 um map, and we have identified 18 young stellar objects (YSOs, 4 Class I and 14 Class II) based on their Spitzer, Wide-field Infrared Survey Explorer (WISE) and Two-Micron All-Sky Survey (2MASS) near- and mid-infrared colours. The dense cores and YSOs are mainly distributed along the filamentary structures of G181.84 and are well traced by HCO$^{+}$(1-0) and N$_{2}$H$^{+}$(1-0) spectral-line emission. We find signatures of sequential star formation activities in G181.84: dense cores and YSOs located in the northern and southern sub-structures are younger than those in the central region. We also detect global velocity gradients of about 0.8$\pm$0.05 km s$^{-1}$pc$^{-1}$ and 1.0$\pm$0.05 km s$^{-1}$pc$^{-1}$ along the northern and southern sub-structures, respectively, and local velocity gradients of 1.2$\pm$0.1 km s$^{-1}$pc$^{-1}$ in the central substructure. These results may be due to the fact that the global collapse of the extended filamentary structure S242 is driven by an edge effect, for which the filament edges collapse first and then further trigger star formation activities inward. We identify three substructures in G181.84 and estimate their critical masses per unit length, which are $\sim$ 101$\pm$15 M$_{\odot}$ pc$^{-1}$, 56$\pm$8 M$_{\odot}$ pc$^{-1}$ and 28$\pm$4 M$_{\odot}$ pc$^{-1}$, respectively. These values are all lower than the observed values ($\sim$ 200 M$_{\odot}$ pc$^{-1}$), suggesting that these sub-structures are gravitationally unstable.Comment: 20 pages, 17 figures, article, accepte

Adaptive Multi‐Site Gradient Adsorption of Siloxane‐Based Protective Layers Enable High Performance Lithium‐Metal Batteries

Low Coulombic efficiency and significant capacity decay resulting from an unstable solid electrolyte interphase (SEI) and dendritic growth pose challenges to the practical application of lithium-metal batteries. In this study, a highly efficient protection layer induced by octaphenylsilsesquioxane (OPS) with LiFSI salt is investigated

The Gauged O(3) Sigma Model: Schr\"odinger Representation and Hamilton-Jacobi Formulation

We first study a free particle on an $(n-1)$-sphere in an extended phase space, where the originally second-class Hamiltonian and constraints are now in strong involution. This allows for a Schr\"odinger representation and a Hamilton-Jacobi formulation of the model. We thereby obtain the free particle energy spectrum corresponding to that of a rigid rotator. We extend these considerations to a modified version of the field theoretical O(3) nonlinear sigma model, and obtain the corresponding energy spectrum as well as BRST Lagrangian.Comment: 18 page

Enabling High‐Stability of Aqueous‐Processed Nickel‐Rich Positive Electrodes in Lithium Metal Batteries

Lithium batteries occupy the large-scale electric mobility market raising concerns about the environmental impact of cell production, especially regarding the use of poly(vinylidene difluoride) (teratogenic) and N-methyl-2-pyrrolidone (NMP, harmful). To avoid their use, an aqueous electrode processing route is utilized in which a water-soluble hybrid acrylic-fluoropolymer together with sodium carboxymethyl cellulose is used as binder, and a thin phosphate coating layer is in situ formed on the surface of the nickel-rich cathode during electrode processing. The resulting electrodes achieve a comparable performance to that of NMP-based electrodes in conventional organic carbonate-based electrolyte (LP30). Subsequently, an ionic liquid electrolyte (ILE) is employed to replace the organic electrolyte, building stable electrode/electrolyte interphases on the surface of the nickel-rich positive electrode (cathode) and metallic lithium negative electrode (anode). In such ILE, the aqueously processed electrodes achieve high cycling stability with a capacity retention of 91% after 1000 cycles (20 °C). In addition, a high capacity of more than 2.5 mAh cm$^{-2}$ is achieved for high loading electrodes (≈15 mg cm$^{-2}$) by using a modified ILE with 5% vinylene carbonate additive. A path to achieve environmentally friendly electrode manufacturing while maintaining their outstanding performance and structural integrity is demonstrated