3 research outputs found
Effects of serum proteins on corrosion behavior of ISO 5832–9 alloy modified by titania coatings
Stainless steel ISO 5832–9 type is often used to
perform implants which operate in protein-containing physiological
environments. The interaction between proteins and
surface of the implant may affect its corrosive properties. The
aim of this work was to study the effect of selected serum
proteins (albumin and γ-globulins) on the corrosion of ISO
5832–9 alloy (trade name M30NW) which surface was modified
by titania coatings. These coatings were obtained by sol–
gel method and heated at temperatures of 400 and 800 °C. To
evaluate the effect of the proteins, the corrosion tests were
performed with and without the addition of proteins with
concentration of 1 g L−1 to the physiological saline solution
(0.9 % NaCl, pH 7.4) at 37 °C. The tests were carried out
within 7 days. The following electrochemical methods were
used: open circuit potential, linear polarization resistance, and
electrochemical impedance spectroscopy. In addition, surface
analysis by optical microscopy and X-ray photoelectron spectroscopy
(XPS) method was done at the end of weekly corrosion
tests. The results of corrosion tests showed that M30NW
alloy both uncoated and modified with titania coatings exhibits
a very good corrosion resistance during weekly exposition
to corrosion medium. The best corrosion resistance in
0.9 % NaCl solution is shown by alloy samples modified by
titania coating annealed at 400 °C. The serumproteins have no
significant effect onto corrosion of investigated biomedical
steel. The XPS results confirmed the presence of proteins on
the alloy surface after 7 days of immersion in proteincontaining
solutions.The investigations were supported by the National Science Centre project No. N N507 501339. The authors gratefully acknowledge Dr. Janusz
Sobczak and Dr. hab. Wojciech Lisowski from Institute of Physical
Chemistry of PAS for XPS surface analyses