Effects of Homogenization and Ultra-high Temperature Processing on the Properties of Whole Milk Concentrated by a Multiple-Membrane Separation System

Three different concentrated whole milks (2.5x, 2.75x, and 3.0x) were produced by mixing equal parts of ultrafiltration retentate of whole milk and reverse osmosis retentate of the UF milk permeate. The concentrated whole milks were ultra-high temperature processed by direct steam injection (140.6°C) followed by flash cooling and two-stage homogenization pressures (2500/500 psi, 3500/700 psi, or 4500/900 psi). The milk concentrates were packaged aseptically and stored at room temperature. On the other hand, the milk concentrates produced by the RO single membrane system with the same concentration levels served as the control. Physicochemical properties of the milks were surveyed every 2 weeks during a 6-month storage period. The milk concentrates combined from the blending of multiple-membrane retentates showed the expeected concentrations of all major nutrients except nonprotein nitrogen. A 20% to 32% shortage of nonprotein nitrogen permeated through the RO membrane during the production of the concentrated whole milks. Over the 6 months\u27 storage, nonprotein nitrogen content did not significantly change in the 2.5x, 2.75x, and 3.0x concentrated whole milks. No microbial growth or enzyme activity was measured or observed in the samples collected. Milk concentrated 2.5x with 4500/900psi homogenization pressure did not show cream plug formation during the first 5 months of storage. Milk concentrated 2.75x with 4500/900 psi homogenization pressure had the approximate cream plug level of the 2.5x concentrated milk at 4 months of storage. Milk concentrated 3.0x with 4500/900 psi homegenization pressure showed cream plugging at 2.5 months. As higher homogenization pressure was applied to the milk concentrates, less creaming occurred at all milk concentration levels. Homogenization at all pressures did not reduce or eliminate sedimentation during storage. The milk concentrates from the control RO membrane processing showed less sedimentation than did the concentrates from the multiple membrane system at the same homogenization pressure (2500/500 psi). the higher the concentration of total milk solids, the more sedimentation occurred. Viscosity was not affected by homogenization pressure in any of the concentrated whole milks

Taiwanese Adolescent Psychosocial Development in Urban and Rural Areas

The purpose of this study was to investigate Taiwanese adolescent psychosocial development (i.e., autonomy and identity development) based on psychosocial theoretical models developed in western societies. Data were collected from both public senior high and vocational high schools in both urban and rural areas in Taiwan. Adolescent participants, with an average age of 17 years old, included 447 (about 54% were females) from urban areas, and 702 (62% were females) from rural areas. The results of this study revealed that Taiwanese adolescents from both urban and rural areas were similar to adolescent developmental ranges suggested in western theories. There were a few variations revealed in this study, such as scores of internal consistency, average scores of each scale, associations among indicators, and the numbers of youth classified of certain developmental status. In general, the relationships between factors and adolescent psychosocial developmental outcomes did not moderate by regional differences. Identity development of Taiwanese youth from both areas was more likely to be predicted by both situational (e.g., family income and school type) and agential factors (e.g., collectivism, parent attachment, and resiliency) than Taiwanese adolescent cognitive, emotional, and behavioral autonomy. Higher family income level and greater resiliency scores were positively associated with high autonomy and/or achieved identity status. Strong beliefs in collectivism and secure attachments with parents did not significantly correlate with autonomy but did correlate with foreclosure identity status. Across the analysis models in this study, resiliency was the strongest factor which was associated with high autonomous status and identity achievement. Implications and further recommendations for research and practical uses were further discussed

Prevalence and correlates of vaccine attitudes and behaviors in a cohort of low-income mothers

The US is facing a rise in vaccine hesitancy, delay, and refusal, though little is known about these outcomes in socio-economically disadvantaged populations. This study examines the prevalence and correlates of vaccine attitudes and behaviors in a diverse cohort of low-income mothers receiving home visiting services. Survey data were collected from 813 recipients of evidence-based home visiting services in Wisconsin from 2013 to 2018. Analyses were performed to describe outcome measures of vaccine attitudes and self-reported completion, and multivariate regressions were used to test associations between vaccine-related outcomes and hypothesized correlates. Most women (94%) reported their children were up to date on vaccines; 14.3% reported having ever delayed vaccination. A small minority disagreed that vaccines are important (5.0%), effective (5.4%), and safe (6.2%), though a larger proportion responded ambivalently (10.9%–21.9%). Participants with greater trust in health care providers reported more positive overall vaccine attitudes (B = 0.24; 95% CI = 0.17, 0.31), a lower likelihood of vaccine delay (OR = 0.57; 95% CI = 0.46, 0.73), and a greater likelihood of being up to date on vaccines (OR = 1.79, 95% CI = 1.30, 2.44). Women with greater trust in a home visitor also rated vaccines more positively (B = 0.09; 95% CI = 0.02, 0.15), and women who reported better mental health were more likely to report their children were up to date (OR = 1.05; 95% CI = 1.02, 1.09). Compared to non-Hispanic whites, American Indians and non-Hispanic blacks had poorer vaccine-related outcomes. More research on vaccine attitudes and behaviors among higher-risk populations is needed to develop tailored strategies aimed at addressing vaccine hesitancy and underimmunization

The biological impacts of CEBPD on urothelial carcinoma development and progression

Urothelial carcinoma (UC), which includes urinary bladder urothelial carcinoma (UBUC) and upper tract urothelial carcinoma (UTUC), is one of the most common malignancies worldwide. Accordingly, a comprehensive understanding of the underlying mechanism governing UC development is compulsory. Aberrant CCAAT/enhancer-binding protein delta (CEBPD), a transcription factor, displays an oncogene or tumor suppressor depending on tumor type and microenvironments. However, CEBPD has been reported to possess a clear oncogenic function in UC through multiple regulation pathways. Genomic amplification of CEBPD triggered by MYC-driven genome instability is frequently examined in UC that drives CEBPD overexpression. Upregulated CEBPD transcriptionally suppresses FBXW7 to stabilize MYC protein and further induces hexokinase II (HK2)-related aerobic glycolysis that fuels cell growth. Apart from the MYC-dependent pathway, CEBPD also downregulates the level of hsa-miR-429 to enhance HK2-associated glycolysis and induce angiogenesis driven by vascular endothelial growth factor A (VEGFA). Additionally, aggressive UC is attributed to the tumor metastasis regulated by CEBPD-induced matrix metalloproteinase-2 (MMP2) overexpression. Furthermore, elevated CEBPD induced by cisplatin (CDDP) is identified to have dual functions, namely, CDDP-induced chemotherapy resistance or drive CDDP-induced antitumorigenesis. Given that the role of CEBPD in UC is getting clear but pending a more systemic reappraisal, this review aimed to comprehensively discuss the underlying mechanism of CEBPD in UC tumorigenesis

Revision of Polygonatum (Asparagaceae, Nolinoideae, Polygonateae) of Taiwan

Polygonatum is widely distributed in the northern hemisphere, especially in eastern Asia. There has been no comprehensive taxonomic study of Taiwanese taxa for some time, and researchers could not agree on a consistent treatment of the genus. Therefore, we revised the genus by literature review and type specimen examination along with comparison of morphology, karyotype and pollen characteristics. Only one species P. arisanense Hayata was recognized in this study. P. chingshuishanianum Ying and P. formosanum (Hayata) Masamune & Simada are regarded as varieties of P. arisanense and are here presented as two new combinations, P. arisanense var. chingshuishanianum and P. arisanense var. formosanum

Taxonomic revision of Disporum Salisb. (Colchicaceae, Uvularioideae) of Taiwan

A taxonomic revision of Disporum of Taiwan is presented with two species and one variety being recognised. The diagnostic characters of Disporum include the colour of tepals, stolon morphology, the trichomes of filaments and style and leaf morphology. These characters, along with karyotype and pollen morphology, are discussed and evaluated amongst different taxa. As a result, D. kawakamii and D. shimadae are treated as independent species, rather than varieties of D. cantoniense and D. sessile, respectively. Disporum nantouense is treated as a synonym of D. sessile var. intermedium stat. nov. Detailed descriptions, type information, diagnostic key, line drawings, photos and distribution maps are provided

Calcium alginate hydrogel beads with high stiffness and extended dissolution behaviour

Alginate hydrogel bead has been widely explored as a vehicle for controlled delivery application due to its non-toxicity, renewability, and ease of formation. However, alginate hydrogel beads are known to have a low stiffness, i.e., Young modulus <1 MPa, and a short dissolution time of between 1 h and 2 h in gastrointestinal fluid. This study aimed to fabricate calcium alginate hydrogel beads with desired properties like high stiffness and extended dissolution behaviour. A temperature-controlled extrusion–dripping method incorporating an immiscible interphase column was used to produce the ultra-high concentration (UHC) calcium hydrogel beads directly from unmodified alginate solution. The UHC beads have an extraordinary internal structure with thick calcium-alginate matrices and large pores in between the matrices. The Young’s modulus value of UHC calcium alginate beads was 3.6 MPa, which was approximately 8 times higher than the normal calcium alginate beads. The release profile for the model drug (i.e., methylene blue) encapsulated in UHC beads was found to be extended to 4 h at 80% of drug release (t80). The kinetics of drug release fitted well with the Korsmeyer–Peppas model (r2 ⩾ 0.99) and followed the non-Fickian mechanism. These findings show that the preparation of calcium alginate beads featuring high stiffness and extended dissolution profile can be achieved without any chemical modification or additives. The UHC calcium alginate bead holds excellent promise as an encapsulation carrier of drugs or food used in controlled delivery applications

Loading effects of anterior cervical spine fusion on adjacent segments

AbstractAdjacent segment degeneration typically follows anterior cervical spine fusion. However, the primary cause of adjacent segment degeneration remains unknown. Therefore, in order to identify the loading effects that cause adjacent segment degeneration, this study examined the loading effects to superior segments adjacent to fused bone following anterior cervical spine fusion. The C3–C6 cervical spine segments of 12 sheep were examined. Specimens were divided into the following groups: intact spine (group 1); and C5–C6 segments that were fused via cage-instrumented plate fixation (group 2). Specimens were cycled between 20° flexion and 15° extension with a displacement control of 1°/second. The tested parameters included the range of motion (ROM) of each segment, torque and strain on both the body and inferior articular process at the superior segments (C3–C4) adjacent to the fused bone, and the position of the neutral axis of stress at under 20° flexion and 15° extension. Under flexion and Group 2, torque, ROM, and strain on both the bodies and facets of superior segments adjacent to the fused bone were higher than those of Group 1. Under extension and Group 2, ROM for the fused segment was less than that of Group 1; torque, ROM, and stress on both the bodies and facets of superior segments adjacent to the fused bone were higher than those of Group 1. These analytical results indicate that the muscles and ligaments require greater force to achieve cervical motion than the intact spine following anterior cervical spine fusion. In addition, ROM and stress on the bodies and facets of the joint segments adjacent to the fused bone were significantly increased. Under flexion, the neutral axis of the stress on the adjacent segment moved backward, and the stress on the bodies of the segments adjacent to the fused bone increased. These comparative results indicate that increased stress on the adjacent segments is caused by stress-shielding effects. Furthermore, increased stress and ROM of the adjacent segments after long-term bone fusion may accelerate degeneration in adjacent segment

Evaluation of unilateral cage-instrumented fixation for lumbar spine

<p>Abstract</p> <p>Background</p> <p>To investigate how unilateral cage-instrumented posterior lumbar interbody fusion (PLIF) affects the three-dimensional flexibility in degenerative disc disease by comparing the biomechanical characteristics of unilateral and bilateral cage-instrumented PLIF.</p> <p>Methods</p> <p>Twelve motion segments in sheep lumbar spine specimens were tested for flexion, extension, axial rotation, and lateral bending by nondestructive flexibility test method using a nonconstrained testing apparatus. The specimens were divided into two equal groups. Group 1 received unilateral procedures while group 2 received bilateral procedures. Laminectomy, facectomy, discectomy, cage insertion and transpedicle screw insertion were performed sequentially after testing the intact status. Changes in range of motion (ROM) and neutral zone (NZ) were compared between unilateral and bilateral cage-instrumented PLIF.</p> <p>Results</p> <p>Both ROM and NZ, unilateral cage-instrumented PLIF and bilateral cage-instrumented PLIF, transpedicle screw insertion procedure did not revealed a significant difference between flexion-extension, lateral bending and axial rotation direction except the ROM in the axial rotation. The bilateral group's ROM (-1.7 ± 0. 8) of axial rotation was decreased significantly after transpedicle screw insertion procedure in comparison with the unilateral group (-0.2 ± 0.1). In the unilateral cage-instrumented PLIF group, the transpedicle screw insertion procedure did not demonstrate a significant difference between right and left side in the lateral bending and axial rotation direction.</p> <p>Conclusions</p> <p>Based on the results of this study, unilateral cage-instrumented PLIF and bilateral cage-instrumented PLIF have similar stability after transpedicle screw fixation in the sheep spine model. The unilateral approach can substantially reduce exposure requirements. It also offers the biomechanics advantage of construction using anterior column support combined with pedicle screws just as the bilateral cage-instrumented group. The unpleasant effect of couple motion resulting from inherent asymmetry was absent in the unilateral group.</p

Expression and purification of the matrix protein of Nipah virus in baculovirus insect cell system

Nipah virus (NiV) causes fatal respiratory illness and encephalitis in humans and animals. The matrix (M) protein of NiV plays an important role in the viral assembly and budding process. Thus, an access to the NiV M protein is vital to the design of viral antigens as diagnostic reagents. In this study, recombinant DNA technology was successfully adopted in the cloning and expression of NiV M protein. A recombinant expression cassette (baculovirus expression vector) was used to encode an N-terminally His-tagged NiV M protein in insect cells. A time-course study demonstrated that the highest yield of recombinant M protein (400–500 μg) was expressed from math formula infected cells 3 days after infection. A single-step purification method based on metal ion affinity chromatography was established to purify the NiV M protein, which successfully yielded a purity level of 95.67% and a purification factor of 3.39. The Western blotting and enzyme-linked immunosorbent assay (ELISA) showed that the purified recombinant M protein (48 kDa) was antigenic and reacted strongly with the serum of a NiV infected pig