3,207 research outputs found
Swinging of red blood cells under shear flow
We reveal that under moderate shear stress (of the order of 0.1 Pa) red blood
cells present an oscillation of their inclination (swinging) superimposed to
the long-observed steady tanktreading (TT) motion. A model based on a fluid
ellipsoid surrounded by a visco-elastic membrane initially unstrained (shape
memory) predicts all observed features of the motion: an increase of both
swinging amplitude and period (1/2 the TT period) upon decreasing the shear
stress, a shear stress-triggered transition towards a narrow shear stress-range
intermittent regime of successive swinging and tumbling, and a pure tumbling
motion at lower shear stress-values.Comment: 4 pages 5 figures submitted to Physical Review Letter
Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene Rubber/Standard Malaysian Rubber Blend Adhesive
Viscosity, tack and, peel and shear strengths of ethylene-propylene-diene rubber (EPDM)/standard Malaysian rubber (SMR L)
blend adhesive were studied using various blend ratios of the two rubbers, ranging from 0 to 100% EPDM. Coumarone-indene
resin, toluene, and poly(ethylene terephthalate) (PET) were used as the tackifier, solvent, and coating substrate, respectively. The
tackifier content was fixed at 40 parts per hundred parts of rubber (phr). A SHEEN hand coater was used to coat the adhesive
on PET film at four coating thicknesses, that is, 30, 60, 90, and 12
Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend Based Pressure-Sensitive Adhesive
Viscosity and adhesion properties of NBR/SMR L blend based pressure-sensitive adhesive were investigated using coumaroneindene
resin, toluene, and poly(ethylene terephthalate) (PET) as tackifier, solvent, and coating substrate, respectively. Coumaroneindene
resin content was fixed at 40 parts per hundred parts of rubber (phr) in the adhesive formulation.The ratio of NBR/SMR L
blend used was 0, 20, 40, 60, 80, and 100% of NBR content. Four different thicknesses, that is, 30, 60, 90, and 12
The rigidity of periodic body-bar frameworks on the three-dimensional fixed torus
We present necessary and sufficient conditions for the generic rigidity of
body-bar frameworks on the three-dimensional fixed torus. These frameworks
correspond to infinite periodic body-bar frameworks in with a
fixed periodic lattice.Comment: 31 pages, 12 figure
Dynamic ATR-FTIR and TEM study of the resin-dentin interface in Reactmer Bond
Abstract no. 895published_or_final_versio
Automated targeting approach for synthesis of heat exchanger network (HEN) with trigeneration system
AbstractIn this work, a novel systematic approach for the synthesis of heat exchanger network (HEN) with trigeneration system via multiple cascades automated targeting (MCAT) is presented. The optimisation objective is to locate the minimum total operating cost (TOC) of the system. The minimum hot and cold utilities of the HEN, allocation of utilities and potential power generation as well as the type of fuel can be determined via proposed approach. A case study of formic acid processing plant is solved to illustrate proposed approach
Selective interlayer ferromagnetic coupling between the Cu spins in YBa Cu O grown on top of La Ca MnO
Studies to date on ferromagnet/d-wave superconductor heterostructures focus
mainly on the effects at or near the interfaces while the response of bulk
properties to heterostructuring is overlooked. Here we use resonant soft x-ray
scattering spectroscopy to reveal a novel c-axis ferromagnetic coupling between
the in-plane Cu spins in YBa Cu O (YBCO) superconductor when it
is grown on top of ferromagnetic La Ca MnO (LCMO) manganite
layer. This coupling, present in both normal and superconducting states of
YBCO, is sensitive to the interfacial termination such that it is only observed
in bilayers with MnO_2but not with La Ca interfacial
termination. Such contrasting behaviors, we propose, are due to distinct
energetic of CuO chain and CuO plane at the La Ca and
MnO terminated interfaces respectively, therefore influencing the transfer
of spin-polarized electrons from manganite to cuprate differently. Our findings
suggest that the superconducting/ferromagnetic bilayers with proper interfacial
engineering can be good candidates for searching the theorized
Fulde-Ferrel-Larkin-Ovchinnikov (FFLO) state in cuprates and studying the
competing quantum orders in highly correlated electron systems.Comment: Please note the change of the title. Text might be slightly different
from the published versio
Isostatic phase transition and instability in stiff granular materials
In this letter, structural rigidity concepts are used to understand the
origin of instabilities in granular aggregates. It is shown that: a) The
contact network of a noncohesive granular aggregate becomes exactly isostatic
in the limit of large stiffness-to-load ratio. b) Isostaticity is responsible
for the anomalously large susceptibility to perturbation of these systems, and
c) The load-stress response function of granular materials is critical
(power-law distributed) in the isostatic limit. Thus there is a phase
transition in the limit of intinitely large stiffness, and the resulting
isostatic phase is characterized by huge instability to perturbation.Comment: RevTeX, 4 pages w/eps figures [psfig]. To appear in Phys. Rev. Let
Floating Node Method and Virtual Crack Closure Technique for Modeling Matrix Cracking-Delamination Interaction
A novel approach is proposed for high-fidelity modeling of progressive damage and failure in composite materials that combines the Floating Node Method (FNM) and the Virtual Crack Closure Technique (VCCT) to represent multiple interacting failure mechanisms in a mesh-independent fashion. In this study, the approach is applied to the modeling of delamination migration in cross-ply tape laminates. Delamination, matrix cracking, and migration are all modeled using fracture mechanics based failure and migration criteria. The methodology proposed shows very good qualitative and quantitative agreement with experiments
Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend Based Pressure-Sensitive Adhesive
Viscosity and adhesion properties of NBR/SMR L blend based pressure-sensitive adhesive were investigated using coumarone-indene resin, toluene, and poly(ethylene terephthalate) (PET) as tackifier, solvent, and coating substrate, respectively. Coumarone-indene resin content was fixed at 40 parts per hundred parts of rubber (phr) in the adhesive formulation. The ratio of NBR/SMR L blend used was 0, 20, 40, 60, 80, and 100% of NBR content. Four different thicknesses, that is, 30, 60, 90, and 120 µm, were used to coat the PET film. The viscosity of adhesive was determined by a Brookfield viscometer, whereas loop tack, peel strength, and shear strength were measured using a Lloyd Adhesion Tester operating at 30 cm/min. Result indicates that the viscosity, loop tack, and shear strength of blend adhesives increase with % NBR. However, for peel strength, it indicates a maximum at 40% NBR blend ratio for the three modes of peel tests. In all cases, 120 µm coated sample consistently exhibits the highest adhesion values compared to the other coating thicknesses, an observation which is associated with the higher volume of adhesive in the former system
- …