28 research outputs found
Patient-specific finite element models of posterior pedicle screw fixation : effect of screw’s size and geometry
Pedicle screw fixation is extensively performed to treat spine injuries or diseases and it is common for thoracolumbar fractures. Post-operative complications may arise from this surgery leading to back pain or revisions. Finite element (FE) models could be used to predict the outcomes of surgeries but should be verified when both simplified and realistic designs of screws are used. The aim of this study was to generate patient-specific Computed Tomography (CT)-based FE models of human vertebrae with two pedicle screws, verify the models, and use them to evaluate the effect of the screws’ size and geometry on the mechanical properties of the screws-vertebra structure. FE models of the lumbar vertebra implanted with two pedicle screws were created from anonymized CT-scans of three patients. Compressive loads were applied to the head of the screws. The mesh size was optimized for realistic and simplified geometry of the screws with a mesh refinement study. Finally, the optimal mesh size was used to evaluate the sensitivity of the model to changes in screw’s size (diameter and length) and geometry (realistic or simplified). For both simplified and realistic models, element sizes of 0.6 mm in the screw and 1.0 mm in the bone allowed to obtain relative differences of approximately 5% or lower. Changes in screw’s length resulted in 4–10% differences in maximum deflection, 1–6% differences in peak stress in the screws, 10–22% differences in mean strain in the bone around the screw; changes in screw’s diameter resulted in 28–36% differences in maximum deflection, 6–27% differences in peak stress in the screws, and 30–47% differences in mean strain in the bone around the screw. The maximum deflection predicted with realistic or simplified screws correlated very well (R2 = 0.99). The peak stress in screws with realistic or simplified design correlated well (R2 = 0.82) but simplified models underestimated the peak stress. In conclusion, the results showed that the diameter of the screw has a major role on the mechanics of the screw-vertebral structure for each patient. Simplified screws can be used to estimate the mechanical properties of the implanted vertebrae, but the systematic underestimation of the peak stress should be considered when interpreting the results from the FE analyses
Prediction of the 3D shape of the L1 vertebral body from adjacent vertebrae
The aim of treatments of vertebral fractures is the anatomical reduction to restore the physiological biomechanics of the spine and the stabilization of the fracture to allow bone healing. However, the three-dimensional shape of the fractured vertebral body before the fracture is unknown in the clinical setting. Information about the pre-fracture vertebral body shape could help surgeons to select the optimal treatment. The goal of this study was to develop and validate a method based on Singular Value Decomposition (SVD) to predict the shape of the vertebral body of L1 from the shapes of T12 and L2. The geometry of the vertebral bodies of T12, L1 and L2 vertebrae of 40 patients were extracted from CT scans available from the VerSe2020 open-access dataset. Surface triangular meshes of each vertebra were morphed onto a template mesh. The set of vectors with the node coordinates of the morphed T12, L1 and L2 were compressed with SVD and used to build a system of linear equations. This system was used to solve a minimization problem and to reconstruct the shape of L1. A leave-one-out cross-validation was performed. Moreover, the approach was tested against an independent dataset with large osteophytes. The results of the study show a good prediction of the shape of the vertebral body of L1 from the shapes of the two adjacent vertebrae (mean error equal to 0.51 ± 0.11 mm on average, Hausdorff distance equal to 2.11 ± 0.56 mm on average), compared to current CT resolution typically used in the operating room. The error was slightly higher for patients presenting large osteophytes or severe bone degeneration (mean error equal to 0.65 ± 0.10 mm, Hausdorff distance equal to 3.54 ± 1.03 mm). The accuracy of the prediction was significantly better than approximating the shape of the vertebral body of L1 by the shape of T12 or L2. This approach could be used in the future to improve the pre-planning of spine surgeries to treat vertebral fractures
SND@LHC: The Scattering and Neutrino Detector at the LHC
SND@LHC is a compact and stand-alone experiment designed to perform measurements with neutrinos produced at the LHC in the pseudo-rapidity region of . The experiment is located 480 m downstream of the ATLAS interaction point, in the TI18 tunnel. The detector is composed of a hybrid system based on an 830 kg target made of tungsten plates, interleaved with emulsion and electronic trackers, also acting as an electromagnetic calorimeter, and followed by a hadronic calorimeter and a muon identification system. The detector is able to distinguish interactions of all three neutrino flavours, which allows probing the physics of heavy flavour production at the LHC in the very forward region. This region is of particular interest for future circular colliders and for very high energy astrophysical neutrino experiments. The detector is also able to search for the scattering of Feebly Interacting Particles. In its first phase, the detector will operate throughout LHC Run 3 and collect a total of 250
Evaluation of fracture properties of cancellous bone tissues using digital image correlation/wedge splitting test method
International audienceThe fracture mechanics (FM) parameters of cancellous bone tissues are very important from a clinical point of view especially for the bone cement augmentation. From the literature review, one can observe that the experimental determination of fracture mechanic parameters of cancellous bone are still lacking. This can be due to the conditions associated with the unstable crack propagation in the cancellous bone and lack of tools to extract and measure the parameters (like crack opening displacement (COD) and crack length) in the course of fracture tests, which are necessary to evaluate the fracture properties. To address above mentioned, a platform was developed integrating an optical measurement technique like digital image correlation (DIC) with classical wedge splitting test (WST) method to extract precise and real crack tip positions, crack opening displacement (COD) at each load step. These indeed used for the evaluation of the fracture mechanic properties (fracture toughness, specific fracture energy ()) of the cancellous bone. Two approaches were used to evaluate the fracture mechanic properties of the bone. The first method is based on the global approach, which was widely used in the literature and the second method is based on the local approach. In this local approach, the local fracture energy () during the course of the test was evaluated, which give access to local fracture mechanics. The results evaluated by both the methods were in good accordance and compared with available literature. In addition, an attempt made to retrieve the real crack tip position at each load step during the test
Radiographic measurement of the congruence angle according to Merchant: validity, reproducibility, and limits
Abstract Purpose The objective of this study was to analyze the intra- and interobserver variability of this measurement according to a strict methodology and on a representative sample of the general population, as well as to identify the possible difficulties of measurement in case of patellar or trochlear dysplasia. Methods This observational study involved radiographic analysis by three independent observers of a total of 50 patients who had a loaded patellofemoral X-ray taken with the knee flexed to 45°. An initial reading was taken to measure the angle of the trochlear sulcus, the Merchant angle, and to classify the knees according to a possible trochlear dysplasia and/or patellar dysplasia according to Wiberg. A second measurement was then performed to analyze intraobserver agreement. Interobserver agreement was measured on all radiographic measurements (n = 100). Results The Merchant patellofemoral congruence angle showed good intraobserver concordance ranging from 0.925 (95% CI 0.868–0.957) to 0.942 (95% CI 0.898–0.967), as well as interobserver concordance ranging from 0.795 (95% CI 0.695–0.862) to 0.914 (95% CI 0.872–0.942). Poor results were found in terms of interobserver concordance on the measurement of the Merchant angle in case of stage 3 Wiberg patella ranging from 0.282 (95% CI −0.920 to 0.731) to 0.611 (95% CI 0.226–0.892). Conclusion Congruence angle is one of most commonly used measurements for patellar tracking. However, the convexity of the patellar surface makes it difficult to identify the patellar apex on its intraarticular facet, making the measurement of the Merchant congruence angle unreliable and not very reproducible in cases of stage 3 Wiberg patella. Registration N°IRB 2021/13
Utility of cement injection to stabilize split-depression tibial plateau fracture by minimally invasive methods: A finite element analysis
International audienceTreatment for fractures of the tibial plateau is in most cases carried out by stable fixation in order to allow early mobilization. Minimally invasive technologies such as tibioplasty or stabilization by locking plate, bone augmentation and cement filling (CF) have recently been used to treat this type of fracture. The aim of this paper was to determine the mechanical behavior of the tibial plateau by numerically modeling and by quantifying the mechanical effects on the tibia mechanical properties from injury healing