8 research outputs found
Additive manufacturing of inorganic scintillator-based particle detectors
Inorganic scintillators are widely used for scientific, industrial and
medical applications. The development of 3D printing with inorganic
scintillators would allow fast creation of detector prototypes for registration
of ionizing radiation, such as alpha and beta, gamma particles in thin layers
of active material and soft X-ray radiation. This article reports on the
technical work and scientific achievements that aimed at developing a new
inorganic scintillation filament to be used for the 3D printing of composite
scintillator materials: study and definition of the scintillator composition;
development of the methods for the inorganic scintillator filament production
and further implementation in the available 3D printing technologies; study of
impact of the different 3D printing modes on the material scintillation
characteristics. Also, 3D printed scintillators can be used for creation of
combined detectors for high-energy physics.Comment: 14 pages, 16 figure
A novel polystyrene-based scintillator production process involving additive manufacturing
Plastic scintillator detectors are widely used in particle physics thanks to the very good particle identification, tracking capabilities and time resolution. However, new experimental challenges and the need for enhanced performance require the construction of detector geometries that are complicated using the current production techniques. In this article we propose a new production technique based on additive manufacturing that aims to 3D print polystyrene-based scintillator. The production process and the results of the scintillation light output measurement of the 3D-printed scintillator are reported.ISSN:1748-022
Demonstrating a single-block 3D-segmented plastic-scintillator detector
Three-dimensional finely grained plastic scintillator detectors bring many advantages in particle detectors, allowing a massive active target which enables a high-precision tracking of interaction products, excellent calorimetry and a sub-nanosecond time resolution. Whilst such detectors can be scaled up to several-tonnes, as required by future neutrino experiments, a relatively long production time, where each single plastic-scintillator element is independently manufactured and machined, together with potential challenges in the assembly, complicates their realisation. In this manuscript we propose a novel design for 3D granular scintillator detectors where O(1 cm3) cubes are efficiently glued in a single block of scintillator after being produced via cast polymerization, which can enable rapid and cost-efficient detector construction. This work could become particularly relevant for the detectors of the next-generation long-baseline neutrino-oscillation experiments, such as DUNE, Hyper-Kamiokande and ESSnuSB.ISSN:1748-022
Additive manufacturing of inorganic scintillator-based particle detectors
International audienceInorganic scintillators are widely used for scientific, industrial and medical applications. The development of 3D printing with inorganic scintillators would allow fast creation of detector prototypes for registration of ionizing radiation, such as alpha and beta, gamma particles in thin layers of active material and soft X-ray radiation. This article reports on the technical work and scientific achievements that aimed at developing a new inorganic scintillation filament to be used for the 3D printing of composite scintillator materials: study and definition of the scintillator composition; development of the methods for the inorganic scintillator filament production and further implementation in the available 3D printing technologies; study of impact of the different 3D printing modes on the material scintillation characteristics. Also, 3D printed scintillators can be used for creation of combined detectors for high-energy physics
Radiation resistant optical components for high energy physics detectors
International audienceNew detectors for future high-energy physics experiments will operate under unprecedented radiation dose rates. This condition requires improved radiation resistance on detector equipment. The consequent development of new materials, particularly optical materials, becomes crucial. In this work, optical components mean reflectors, light absorbers, or light transmitters. These materials, reflectors or light transmitters, are needed in detectors primarily to collect and transmit light from the scintillator to the PMT. When it comes to light absorbers, they are required to protect the detector from light from the environment. This work aims at studying selected optical materials with improved properties (functional and optical) and radiation resistance that can be used in new detectors at the Large Hadron Collider (LHC) experiments. Light transmittance, optical reflection, thermal characteristics, and radiation resistance were investigated to evaluate the proposed materials. We have developed optical systems based on siloxanes to continue our previous developments of radiation-resistant materials for radiation detectors. We also report a study of several reflective materials and light absorber introduced into the siloxane. Investigations have shown that these systems are radiation resistant to doses of at least 1 MGy. Tested samples were irradiated at linear electron accelerator LUE-40 in the National Science Center Kharkiv Institute of Physics and Technology (KIPT). The accelerated electrons were sent to the heavy complex targets to deliver the irradiation with gamma or neutron fluxes. The consequent gamma and neutron fluxes and doses were estimated with the GEANT4 simulation
Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements
Plastic scintillator detectors are used in high energy physics as well as for diagnostic imaging in medicine, beam monitoring on hadron therapy, muon tomography, dosimetry and many security applications. To combine particle tracking and calorimetry it is necessary to build detectors with three-dimensional granularity, i.e. small voxels of scintillator optically isolated from each other. Recently, the 3DET collaboration demonstrated the possibility to 3D print polystyrene-based scintillators with a light output performance close to that obtained with standard production methods. In this article, after providing a further characterization of the developed scintillators, we show the first matrix of plastic scintillator cubes optically separated by a white reflector material entirely 3D printed with fused deposition modeling. This is a major milestone towards the 3D printing of the first real particle detector. A discussion of the results as well as the next steps in the R&D is also provided.ISSN:1748-022
Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements
Plastic scintillator detectors are used in high energy physics as well as for diagnostic imaging in medicine, beam monitoring on hadron therapy, muon tomography, dosimetry and many security applications. To combine particle tracking and calorimetry it is necessary to build detectors with three-dimensional granularity, i.e. small voxels of scintillator optically isolated from each other. Recently, the 3DET collaboration demonstrated the possibility to 3D print polystyrene-based scintillators with a light output performance close to that obtained with standard production methods. In this article, after providing a further characterization of the developed scintillators, we show the first matrix of plastic scintillator cubes optically separated by a white reflector material entirely 3D printed with fused deposition modeling. This is a major milestone towards the 3D printing of the first real particle detector. A discussion of the results as well as the next steps in the R&D is also provided