117 research outputs found
Properties of electrochemical double-layer capacitors with carbon-nanotubes-on-carbon-fiber-felt electrodes
Carbon nanotube (CNT) layers deposited on carbon fiber cloth (CFC) materials have been studied as electrodes of electrochemical double layer capacitors (EDLCs), in particular, the electrochemical performance and cycle stability of symmetric EDLCs in an organic electrolyte (tetraethyl-ammonium-fluoroborate in acetonitrile). Due to the large surface area of carbon-fibers, the CNT mass loading can be as high as 18 mg/cm2 which is magnitudes larger than that of what can be deposited on aluminum or nickel metal sheets. The area normalized double layer capacitance of CNT/CFC electrodes in the above organic electrolytes were found to be in the range of 100 â 400 mF/cm2, and the specific capacitances were 18 to 48 F/g. These latter values are below the achievable values of single-wall CNT of 80 F/g; the lower values can be attributed to the presence of multi-walled CNTs of some quantities, having lower accessible surface area. The energy density of CNT/CFC supercapacitors is 0.8 â 1.5 Wh/kg, while the power density varies between 5-20 kW/kg calculated on electrode level. Excellent cycling stability of EDLCs built with CNT-on carbon felt electrodes has been demonstrated up to 1 million cycles, which is due to the inert nature of substrate causing the absence of corrosion process and high mass load of CNT
Electrochemical Impedance Spectroscopy in Interfacial Studies
An important role of the electrochemical impedance spectroscopy (EIS) is the characterization of the electrical double layer formed at the electrode/electrolyte interfaces. The phenomenological double layer studies with an aqueous and ionic liquid electrolytes are reviewed with a conclusion that the double layer capacitance is frequency dependent as the rule rather than the exception. We discuss the impedance consequences of the nonuniform current distribution along the electrochemical interface, which also contributes to the apparent frequency dependence of the capacitance. Finally we show recent articles on nonconventional EIS techniques with high lateral resolution or enabling fast measurements
Electrochemical noise and impedance of Au electrode/electrolyte interfaces enabling extracellular detection of glioma cell populations
Microelectrode arrays (MEA) record extracellular local field potentials of cells adhered to the electrodes. A disadvantage is the limited signal-to-noise ratio. The state-of-the-art background noise level is about 10 mu Vpp. Furthermore, in MEAs low frequency events are filtered out. Here, we quantitatively analyze Au electrode/electrolyte interfaces with impedance spectroscopy and noise measurements. The equivalent circuit is the charge transfer resistance in parallel with a constant phase element that describes the double layer capacitance, in series with a spreading resistance. This equivalent circuit leads to a Maxwell-Wagner relaxation frequency, the value of which is determined as a function of electrode area and molarity of an aqueous KCl electrolyte solution. The electrochemical voltage and current noise is measured as a function of electrode area and frequency and follow unambiguously from the measured impedance. By using large area electrodes the noise floor can be as low as 0.3 mu Vpp. The resulting high sensitivity is demonstrated by the extracellular detection of C6 glioma cell populations. Their minute electrical activity can be clearly detected at a frequency below about 10 Hz, which shows that the methodology can be used to monitor slow cooperative biological signals in cell populations
Ab initio calculations for bromine adlayers on the Ag(100) and Au(100) surfaces: the c(2x2) structure
Ab initio total-energy density-functional methods with supercell models have
been employed to calculate the c(2x2) structure of the Br-adsorbed Ag(100) and
Au(100) surfaces. The atomic geometries of the surfaces and the preferred
bonding sites of the bromine have been determined. The bonding character of
bromine with the substrates has also been studied by analyzing the electronic
density of states and the charge transfer. The calculations show that while the
four-fold hollow-site configuration is more stable than the two-fold
bridge-site topology on the Ag(100) surface, bromine prefers the bridge site on
the Au(100) surface. The one-fold on-top configuration is the least stable
configuration on both surfaces. It is also observed that the second layer of
the Ag substrate undergoes a small buckling as a consequence of the adsorption
of Br. Our results provide a theoretical explanation for the experimental
observations that the adsorption of bromine on the Ag(100) and Au(100) surfaces
results in different bonding configurations.Comment: 10 pages, 4 figure, 5 tables, Phys. Rev. B, in pres
Ionic liquids at electrified interfaces
Until recently, âroom-temperatureâ (<100â150 °C) liquid-state electrochemistry was mostly electrochemistry of diluted electrolytes(1)â(4) where dissolved salt ions were surrounded by a considerable amount of solvent molecules. Highly concentrated liquid electrolytes were mostly considered in the narrow (albeit important) niche of high-temperature electrochemistry of molten inorganic salts(5-9) and in the even narrower niche of âfirst-generationâ room temperature ionic liquids, RTILs (such as chloro-aluminates and alkylammonium nitrates).(10-14) The situation has changed dramatically in the 2000s after the discovery of new moisture- and temperature-stable RTILs.(15, 16) These days, the âlater generationâ RTILs attracted wide attention within the electrochemical community.(17-31) Indeed, RTILs, as a class of compounds, possess a unique combination of properties (high charge density, electrochemical stability, low/negligible volatility, tunable polarity, etc.) that make them very attractive substances from fundamental and application points of view.(32-38) Most importantly, they can mix with each other in âcocktailsâ of oneâs choice to acquire the desired properties (e.g., wider temperature range of the liquid phase(39, 40)) and can serve as almost âuniversalâ solvents.(37, 41, 42) It is worth noting here one of the advantages of RTILs as compared to their high-temperature molten salt (HTMS)(43) âsister-systemsâ.(44) In RTILs the dissolved molecules are not imbedded in a harsh high temperature environment which could be destructive for many classes of fragile (organic) molecules
A Comparative Study on Printable Solid Electrolytes toward Ultrahigh Current and Environmentally Stable Thin Film Transistors
- âŠ