The optimisation of water quality monitoring schemes

The monitoring of water quality is necessary to ensure that the health of catchments is maintained. Water quality monitoring is often undertaken by government agencies to identify trends, assess management strategies and the state of catchments. Many water quality studies attempt to identify the quantity and timing of nutrients exported from a catchment. The accuracy of the monitoring scheme is largely controlled by the sampling scheme. Financial constraints are one of the limiting factors and under this constraint, sampling schemes often combine limited sample sizes with estimation methods. The use of statistical methods allows catchment managers to improve the information on expensive water quality properties based on the relationship with low cost properties. Many water quality monitoring programs have access to limited historical data, therefore there is a requirement for methods which can use this limited data to improve water quality monitoring schemes. This thesis aims at examining the effect of event-based sampling, using historical data to improve sample designs and the use of model-based geostatistical methods to improve the quantification of nutrient exports

The clinical relevance of bifid and trifid mandibular canals

Item does not contain fulltextBACKGROUND: Bifid mandibular canals (BMC) and trifid mandibular canals (TMC) are variations on the normal anatomy with incidences ranging from 0.08% to 65.0%. Such aberrations have an important clinical impact. For example, an extra mandibular canal may explain inadequate anesthesia, especially when two mandibular foramina are involved. Furthermore, during mandibular surgery, a second, or even third, neurovascular bundle may be damaged causing paresthesia, neuroma development, or bleeding. CASE REPORT: Two cases are presented in this article. One patient had a BMC on both sites, and the other patient had a TMC on one site and a BMC on the other site. DISCUSSION: Initial screening for the presence of a BMC or TMC can be executed by conventional panoramic radiography. BMCs or TMCs are diagnosed, before executing mandibular surgery; additional CBCT scanning is indicated.1 maart 201

Splintless surgery using patient-specific osteosynthesis in Le Fort I osteotomies:a randomized controlled multi centre trial

The accuracy of orthognathic surgery has improved with three-dimensional virtual planning. The translation of the planning to the surgical result is reported to vary by >2 mm. The aim of this randomized controlled multi-centre trial was to determine whether the use of splintless patient-specific osteosynthesis can improve the accuracy of maxillary translation. Patients requiring a Le Fort I osteotomy were included in the trial. The intervention group was treated using patient-specific osteosynthesis and the control group with conventional osteosynthesis and splint-based positioning. Fifty-eight patients completed the study protocol, 27 in the patient-specific osteosynthesis group and 31 in the control group. The per protocol median anteroposterior deviation was found to be 1.05 mm (interquartile range (IQR) 0.45-2.72 mm) in the patient-specific osteosynthesis group and 1.74 mm (IQR 1.02-3.02 mm) in the control group. The cranial-caudal deviation was 0.87 mm (IQR 0.49-1.44 mm) and 0.98 mm (IQR 0.28-2.10 mm), respectively, whereas the left-right translation deviation was 0.46 mm (IQR 0.19-0.96 mm) in the patient-specific osteosynthesis group and 1.07 mm (IQR 0.62-1.55 mm) in the control group. The splintless patient-specific osteosynthesis method improves the accuracy of maxillary translations in orthognathic surgery and is clinically relevant for planned anteroposterior translations of more than 3.70 mm

The influence of using digital diagnostic information on orthodontic treatment planning - a pilot study

The purpose of this pilot study was to assess whether orthodontic treatment planning is reproducible when carried out using digital records compared with clinical examinations or using standard records. The study also assessed patients' opinion of face-to-face consultations and potential use of teleorthodontics. The study was designed as a prospective observational cross-sectional pilot study and carried out in a UK dental teaching hospital involving 27 subjects. Four consultant Orthodontists carried out treatment planning, firstly following a clinical examination, then using standard records, and then using digital records. Each subject completed a questionnaire. Cohen's kappa coefficient and Fleiss' kappa coefficient were used to assess intra-observer reproducibility and inter-observer reproducibility of treatment planning decisions, respectively. A change in the diagnostic information format affected treatment planning reproducibility for half of the observers. Inter-observer reproducibility was greater when using hard copy records in comparison to digital records. No subjects were unsatisfied with their face-to-face consultation

Accuracy and Reproducibility of Voxel Based Superimposition of Cone Beam Computed Tomography Models on the Anterior Cranial Base and the Zygomatic Arches

Superimposition of serial Cone Beam Computed Tomography (CBCT) scans has become a valuable tool for three dimensional (3D) assessment of treatment effects and stability. Voxel based image registration is a newly developed semi-automated technique for superimposition and comparison of two CBCT scans. The accuracy and reproducibility of CBCT superimposition on the anterior cranial base or the zygomatic arches using voxel based image registration was tested in this study. 16 pairs of 3D CBCT models were constructed from pre and post treatment CBCT scans of 16 adult dysgnathic patients. Each pair was registered on the anterior cranial base three times and on the left zygomatic arch twice. Following each superimposition, the mean absolute distances between the 2 models were calculated at 4 regions: anterior cranial base, forehead, left and right zygomatic arches. The mean distances between the models ranged from 0.2 to 0.37 mm (SD 0.08–0.16) for the anterior cranial base registration and from 0.2 to 0.45 mm (SD 0.09–0.27) for the zygomatic arch registration. The mean differences between the two registration zones ranged between 0.12 to 0.19 mm at the 4 regions. Voxel based image registration on both zones could be considered as an accurate and a reproducible method for CBCT superimposition. The left zygomatic arch could be used as a stable structure for the superimposition of smaller field of view CBCT scans where the anterior cranial base is not visible

Validation of a new three-dimensional imaging system using comparative craniofacial anthropometry

Abstract Background The aim of this study is to validate a new three-dimensional craniofacial stereophotogrammetry imaging system (3dMDface) through comparison with manual facial surface anthropometry. The null hypothesis was that there is no difference between craniofacial measurements using anthropometry vs. the 3dMDface system. Methods Facial images using the new 3dMDface system were taken from six randomly selected subjects, sitting in natural head position, on six separate occasions each 1 week apart, repeated twice at each sitting. Exclusion criteria were excess facial hair, facial piercings and undergoing current dentofacial treatment. 3dMDvultus software allowed facial landmarks to be marked and measurements recorded. The same measurements were taken using manual anthropometry, using soluble eyeliner to pinpoint landmarks, and sliding and spreading callipers and measuring tape to measure distances. The setting for the investigation was a dental teaching hospital and regional (secondary and tertiary care) cleft centre. The main outcome measure was comparison of the craniofacial measurements using the two aforementioned techniques. Results The results showed good agreement between craniofacial measurements using the 3dMDface system compared with manual anthropometry. For all measurements, except chin height and labial fissure width, there was a greater variability with the manual method compared to 3D assessment. Overall, there was a significantly greater variability in manual compared with 3D assessments (p < 0.02). Conclusions The 3dMDface system is validated for craniofacial measurements

Health as a Symbolic Media Interchanging between Body and Social System

Genetics of disease, diagnosis and treatmen