Improved zinc oxide thermal control coatings

Ferricyanide/ferrocyanide couple prevents zinc oxide pigment degradation in thermal control coatings. Chemical couple retards physical optical property changes

Efficient frequency doubler for the soft X-ray SASE FEL at the TESLA Test Facility

This paper describes an effective frequency doubler scheme for SASE free electron lasers. It consists of an undulator tuned to the first harmonic, a dispersion section, and a tapered undulator tuned to the second harmonic. The first stage is a conventional soft X-ray SASE FEL. Its gain is controlled in such a way that the maximum energy modulation of the electron beam at the exit is about equal to the local energy spread, but still far away from saturation. When the electron bunch passes through the dispersion section this energy modulation leads to effective compression of the particles. Then the bunched electron beam enters the tapered undulator and produces strong radiation in the process of coherent deceleration. We demonstrate that a frequency doubler scheme can be integrated into the SASE FEL at the TESLA Test Facility at DESY, and will allow to reach 3 nm wavelength with GW-level of output peak power. This would extend the operating range of the FEL into the so-called water window and significantly expand the capabilities of the TTF FEL user facility.Comment: 17 pages, 13 figure

Drip and Mate Operations Acting in Test Tube Systems and Tissue-like P systems

The operations drip and mate considered in (mem)brane computing resemble the operations cut and recombination well known from DNA computing. We here consider sets of vesicles with multisets of objects on their outside membrane interacting by drip and mate in two different setups: in test tube systems, the vesicles may pass from one tube to another one provided they fulfill specific constraints; in tissue-like P systems, the vesicles are immediately passed to specified cells after having undergone a drip or mate operation. In both variants, computational completeness can be obtained, yet with different constraints for the drip and mate operations

Effect of environment on thermal control coatings

Ferrocyanide and ferricyanide additives for prevention of optical degradation of coatings by ultraviolet radiation and vacuu

QCD evolution and skewedness effects in color dipole description of DVCS

We show the role played by QCD evolution and skewedness effects in the DVCS cross section at large $Q^2$ within the color dipole description of the process at photon level. The dipole cross section is given by the saturation model, which can be improved by DGLAP evolution at high photon virtualities. We investigate both possibilities as well as the off-forward effect through a simple phenomenological parametrisation. The results are compared to the recent ZEUS DVCS data.Comment: LaTeX, 6 pages, 5 Figs. Vers 2: Minor modifications. Accepted by EPJ

Pre-earthquake signals ? Part II: Flow of battery currents in the crust

International audienceWhen rocks are subjected to stress, dormant electronic charge carriers are activated. They turn the stressed rock volume into a battery, from where currents can flow out. The charge carriers are electrons and defect electrons, also known as positive holes or pholes for short. The boundary between stressed and unstressed rock acts as a potential barrier that lets pholes pass but blocks electrons. One can distinguish two situations in the Earth's crust: (i) only pholes spread out of a stressed rock volume into the surrounding unstressed rocks. This is expected to lead to a positive surface charge over a wide area around the future epicenter, to perturbations in the ionosphere, to stimulated infrared emission from the ground, to ionization of the near-ground air, to cloud formation and to other phenomena that have been reported to precede major earthquakes. (ii) both pholes and electrons flow out of the stressed rock volume along different paths, sideward into the relatively cool upper layers of the crust and downward into the hot lower crust. This situation, which is likely to be realized late in the earthquake preparation process, is necessary for the battery circuit to close and for transient electric currents to flow. If burst-like, these currents should lead to the emission of low frequency electromagnetic radiation. Understanding how electronic charge carriers are stress-activated in rocks, how they spread or flow probably holds the key to deciphering a wide range of pre-earthquake signals. It opens the door to a global earthquake early warning system, provided resources are pooled through a concerted and constructive community effort, including seismologists, with international participation

Finite Element Analysis of Strain Effects on Electronic and Transport Properties in Quantum Dots and Wires

Lattice mismatch in layered semiconductor structures with submicron length scales leads to extremely high nonuniform strains. This paper presents a finite element technique for incorporating the effects of the nonuniform strain into an analysis of the electronic properties of SiGe quantum structures. Strain fields are calculated using a standard structural mechanics finite element package and the effects are included as a nonuniform potential directly in the time independent Schrodinger equation; a k-p Hamiltonian is used to model the effects of multiple valence subband coupling. A variational statement of the equation is formulated and solved using the finite element method. This technique is applied to resonant tunneling diode quantum dots and wires; the resulting densities of states confined to the quantum well layers of the devices are compared to experimental current-voltage I(V) curves.Comment: 17 pages (LaTex), 18 figures (JPEG), submitted to Journal of Applied Physic

Electrical Conductivity of Rocks and Dominant Charge Carriers

The prevailing view in the geophysics community is that the electrical conductivity structure of the Earth's continental crust over the 5-35 km depth range can best be understood by assuming the presence of intergranular fluids and/or of intragranular carbon films. Based on single crystal studies of melt-grown MgO, magma-derived sanidine and anorthosite feldspars and upper mantle olivine, we present evidence for the presence of electronic charge carriers, which derive from peroxy defects that are introduced during cooling, under non-equilibrium conditions, through a redox conversion of pairs of solute hydroxyl arising from dissolution of H2O.The peroxy defects become thermally activated in a 2-step process, leading to the release of defect electrons in the oxygen anion sublattice. Known as positive holes and symbolized by h(dot), these electronic charge carriers are highly mobile. Chemically equivalent to O(-) in a matrix of O(2-) they are highly oxidizing. Being metastable they can exist in the matrix of minerals, which crystallized in highly reduced environments. The h(dot) are highly mobile. They appear to control the electrical conductivity of crustal rocks in much of the 5-35 km depth range