422 research outputs found
Peer support for patients with type 2 diabetes: cluster randomised controlled trial
Objective To test the effectiveness of peer support for patients with type 2 diabetes
The Host Galaxies of Radio-Loud AGN: The Black Hole--Galaxy Connection
We have studied the host galaxies of a sample of radio-loud AGN spanning more
than four decades in the energy output of the nucleus. The core sample includes
40 low-power sources (BL Lac objects) and 22 high-power sources (radio-loud
quasars) spanning the redshift range z~0.15 to z~0.5, all imaged with the high
spatial resolution of HST. All of the sources are found to lie in luminous
elliptical galaxies, which follow the Kormendy relation for normal ellipticals.
A very shallow trend is detected between nuclear brightness (corrected for
beaming) and host galaxy luminosity. Black hole masses are estimated for the
entire sample, using both the bulge luminosity--black hole mass and the
velocity dispersion--black hole mass relations for local galaxies. The latter
involves a new method, using the host galaxy morphological parameters, mu_e and
r_e, to infer the velocity dispersion, sigma, via the fundamental plane
correlation. Both methods indicate that the entire sample of radio-loud AGN are
powered by very massive central black holes, with M_{black hole} ~ 10^8 to
10^10 M_{sun}$. Eddington ratios range from L/L_{Eddington} ~ 2 x 10^-4 to ~1,
with the high- power sources having higher Eddington ratios than the low-power
sources. Overall, radio-loud AGN appear to span a very large range in accretion
efficiency, which is all but independent of the mass of the host galaxy.Comment: 21 pages, 5 figures. Accepted for publication in Ap
A powerful intervention: general practitioners' use of sickness certification in depression
<b>Background</b> Depression is frequently cited as the reason for sickness absence, and it is estimated that sickness certificates are issued in one third of consultations for depression. Previous research has considered GP views of sickness certification but not specifically in relation to depression. This study aimed to explore GPs views of sickness certification in relation to depression.<p></p>
<b>Methods</b> A purposive sample of GP practices across Scotland was selected to reflect variations in levels of incapacity claimants and antidepressant prescribing. Qualitative interviews were carried out between 2008 and 2009.<p></p>
<b>Results</b> A total of 30 GPs were interviewed. A number of common themes emerged including the perceived importance of GP advocacy on behalf of their patients, the tensions between stakeholders involved in the sickness certification system, the need to respond flexibly to patients who present with depression and the therapeutic nature of time away from work as well as the benefits of work. GPs reported that most patients with depression returned to work after a short period of absence and that it was often difficult to predict which patients would struggle to return to work.<p></p>
<b>Conclusions</b>
GPs reported that dealing with sickness certification and depression presents distinct challenges. Sickness certificates are often viewed as powerful interventions, the effectiveness of time away from work for those with depression should be subject to robust enquiry
An analytic observational study on complaints management in the general practice out of hours care setting: who complains, why, and what can we do about it?
A vision-based hole quality assessment technique for robotic drilling of composite materials using a hybrid classification model
peer reviewedRobotic drilling has advantages over traditional computer numerical control machines due to its flexibility, dexterity and the potential for rapid production and process automation. The dexterity and reach of the robotic drill end effector enables the efficient drilling of large composite components, such as aircraft wing structures. Due to the anisotropy and inhomogeneity of fibre reinforced polymer composite materials, drilling remains a challenging task. Inspection of the drilled hole is required at the end of the process to ensure the final product is free from defects. Typically, such inspections require the parts to be transferred to a dedicated inspection station, which is a time-consuming non-value-added task and impractical for large components. In the interest of an efficient and sustainable manufacturing process, this work proposes a hybrid classification model implemented with a robotic drilling system to investigate the quality of drilled holes in-situ. The classifier is trained and tested with a random selection of drilled holes and the most accurate classifier is implemented. The selected classifier returns 90% overall prediction accuracy on unseen drilled holes. This machine learning based approach, using a convolutional neural network and support vector machine classifier, can significantly improve inspection reliability while reducing production time for drilled composite components. This is the first study that demonstrates a hole quality assessment technique for robotic drilling of composite material in-situ at scale
The HST Survey of BL Lacertae Objects. II. Host Galaxies
We have used the HST WFPC2 camera to survey 132 BL Lac objects comprising
seven complete radio-, X-ray-, and optically-selected samples. We obtained
useful images for 110 targets spanning the redshift range 0 < z < 1.3. In two
thirds of the BL Lac images, host galaxies are detected, including nearly all
for z < 0.5 (58 of 63). The highest redshift host galaxy detected is in a BL
Lac object at z=0.664. In 58 of the 72 resolved host galaxies, a de Vaucouleurs
profile is significantly preferred, at >99% confidence, over a pure exponential
disk; the two fits are comparable in the remaining 14 cases. These results
limit the number of disk systems to at most 8% of BL Lacs (at 99% confidence),
and are consistent with all BL~Lac host galaxies being ellipticals. The
detected host galaxies are luminous ellipticals with a median absolute
K-corrected magnitude of M_R= -23.7 +- 0.6 mag, at least one magnitude brighter
than M* and comparable to brightest cluster galaxies. The galaxy morphologies
are generally smooth and undisturbed, with small or negligible ellipticities
(<0.2). There is no correlation between host galaxy and observed nuclear
magnitude or estimated jet power corrected for beaming. If black hole mass is
correlated linearly with bulge mass in general, this implies a large range in
Eddington ratio. Present data strongly support the unification picture with FR
I galaxies constituting the bulk of the parent population of BL Lac objects.Comment: Accepted for publication on ApJ. 38 pages, 8 figure
Recommended from our members
Overview of the international project on biogenic aerosol formation in the boreal forest (BIOFOR)
Aerosol formation and subsequent particle growth in ambient air have been frequently observed at a boreal forest site (SMEAR II station) in Southern Finland. The EU funded project BIOFOR (Biogenic aerosol formation in the boreal forest) has focused on: (a) determination of formation mechanisms of aerosol particles in the boreal forest site; (b) verification of emissions of secondary organic aerosols from the boreal forest site; and (c) quantification of the amount of condensable vapours produced in photochemical reactions of biogenic volatile organic compounds (BVOC) leading to aerosol formation. The approach of the project was to combine the continuous measurements with a number of intensive field studies. These field studies were organised in three periods, two of which were during the most intense particle production season and one during a non-event season. Although the exact formation route for 3 nm particles remains unclear, the results can be summarised as follows: Nucleation was always connected to Arctic or Polar air advecting over the site, giving conditions for a stable nocturnal boundary layer followed by a rapid formation and growth of a turbulent convective mixed layer closely followed by formation of new particles. The nucleation seems to occur in the mixed layer or entrainment zone. However two more prerequisites seem to be necessary. A certain threshold of high enough sulphuric acid and ammonia concentrations is probably needed as the number of newly formed particles was correlated with the product of the sulphuric acid production and the ammonia concentrations. No such correlation was found with the oxidation products of terpenes. The condensation sink, i.e., effective particle area, is probably of importance as no nucleation was observed at high values of the condensation sink. From measurement of the hygroscopic properties of the nucleation particles it was found that inorganic compounds and hygroscopic organic compounds contributed both to the particle growth during daytime while at night time organic compounds dominated. Emissions rates for several gaseous compounds was determined. Using four independent ways to estimate the amount of the condensable vapour needed for observed growth of aerosol particles we get an estimate of 2–10×107 vapour molecules cm−3. The estimations for source rate give 7.5–11×104 cm−3 s−1. These results lead to the following conclusions: The most probable formation mechanism is ternary nucleation (water-sulphuric acid-ammonia). After nucleation, growth into observable sizes (~3 nm) is required before new particles appear. The major part of this growth is probably due to condensation of organic vapours. However, there is lack of direct proof of this phenomenon because the composition of 1–5 nm size particles is extremely difficult to determine using the present state-of-art instrumentation
Recommended from our members
Overview of the international project on biogenic aerosol formation in the boreal forest (BIOFOR)
Aerosol formation and subsequent particle growth in ambient air have been frequently observed at a boreal forest site (SMEAR II station) in Southern Finland. The EU funded project BIOFOR (Biogenic aerosol formation in the boreal forest) has focused on: (a) determination of formation mechanisms of aerosol particles in the boreal forest site; (b) verification of emissions of secondary organic aerosols from the boreal forest site; and (c) quantification of the amount of condensable vapours produced in photochemical reactions of biogenic volatile organic compounds (BVOC) leading to aerosol formation. The approach of the project was to combine the continuous measurements with a number of intensive field studies. These field studies were organised in three periods, two of which were during the most intense particle production season and one during a non-event season. Although the exact formation route for 3 nm particles remains unclear, the results can be summarised as follows: Nucleation was always connected to Arctic or Polar air advecting over the site, giving conditions for a stable nocturnal boundary layer followed by a rapid formation and growth of a turbulent convective mixed layer closely followed by formation of new particles. The nucleation seems to occur in the mixed layer or entrainment zone. However two more prerequisites seem to be necessary. A certain threshold of high enough sulphuric acid and ammonia concentrations is probably needed as the number of newly formed particles was correlated with the product of the sulphuric acid production and the ammonia concentrations. No such correlation was found with the oxidation products of terpenes. The condensation sink, i.e., effective particle area, is probably of importance as no nucleation was observed at high values of the condensation sink. From measurement of the hygroscopic properties of the nucleation particles it was found that inorganic compounds and hygroscopic organic compounds contributed both to the particle growth during daytime while at night time organic compounds dominated. Emissions rates for several gaseous compounds was determined. Using four independent ways to estimate the amount of the condensable vapour needed for observed growth of aerosol particles we get an estimate of 2–10×107 vapour molecules cm−3. The estimations for source rate give 7.5–11×104 cm−3 s−1. These results lead to the following conclusions: The most probable formation mechanism is ternary nucleation (water-sulphuric acid-ammonia). After nucleation, growth into observable sizes (~3 nm) is required before new particles appear. The major part of this growth is probably due to condensation of organic vapours. However, there is lack of direct proof of this phenomenon because the composition of 1–5 nm size particles is extremely difficult to determine using the present state-of-art instrumentation
Recommended from our members
Overview of the international project on biogenic aerosol formation in the boreal forest (BIOFOR)
Aerosol formation and subsequent particle growth in ambient air have been frequently observed at a boreal forest site (SMEAR II station) in Southern Finland. The EU funded project BIOFOR (Biogenic aerosol formation in the boreal forest) has focused on: (a) determination of formation mechanisms of aerosol particles in the boreal forest site; (b) verification of emissions of secondary organic aerosols from the boreal forest site; and (c) quantification of the amount of condensable vapours produced in photochemical reactions of biogenic volatile organic compounds (BVOC) leading to aerosol formation. The approach of the project was to combine the continuous measurements with a number of intensive field studies. These field studies were organised in three periods, two of which were during the most intense particle production season and one during a non-event season. Although the exact formation route for 3 nm particles remains unclear, the results can be summarised as follows: Nucleation was always connected to Arctic or Polar air advecting over the site, giving conditions for a stable nocturnal boundary layer followed by a rapid formation and growth of a turbulent convective mixed layer closely followed by formation of new particles. The nucleation seems to occur in the mixed layer or entrainment zone. However two more prerequisites seem to be necessary. A certain threshold of high enough sulphuric acid and ammonia concentrations is probably needed as the number of newly formed particles was correlated with the product of the sulphuric acid production and the ammonia concentrations. No such correlation was found with the oxidation products of terpenes. The condensation sink, i.e., effective particle area, is probably of importance as no nucleation was observed at high values of the condensation sink. From measurement of the hygroscopic properties of the nucleation particles it was found that inorganic compounds and hygroscopic organic compounds contributed both to the particle growth during daytime while at night time organic compounds dominated. Emissions rates for several gaseous compounds was determined. Using four independent ways to estimate the amount of the condensable vapour needed for observed growth of aerosol particles we get an estimate of 2–10×107 vapour molecules cm−3. The estimations for source rate give 7.5–11×104 cm−3 s−1. These results lead to the following conclusions: The most probable formation mechanism is ternary nucleation (water-sulphuric acid-ammonia). After nucleation, growth into observable sizes (~3 nm) is required before new particles appear. The major part of this growth is probably due to condensation of organic vapours. However, there is lack of direct proof of this phenomenon because the composition of 1–5 nm size particles is extremely difficult to determine using the present state-of-art instrumentation
Exosomes neutralize synaptic-plasticity-disrupting activity of Aβ assemblies in vivo
Background: Exosomes, small extracellular vesicles of endosomal origin, have been suggested to be involved in both the metabolism and aggregation of Alzheimer’s disease (AD)-associated amyloid β-protein (Aβ). Despite their ubiquitous presence and the inclusion of components which can potentially interact with Aβ, the role of exosomes in regulating synaptic dysfunction induced by Aβ has not been explored. Results: We here provide in vivo evidence that exosomes derived from N2a cells or human cerebrospinal fluid can abrogate the synaptic-plasticity-disrupting activity of both synthetic and AD brain-derived Aβ. Mechanistically, this effect involves sequestration of synaptotoxic Aβ assemblies by exosomal surface proteins such as PrPC rather than Aβ proteolysis. Conclusions: These data suggest that exosomes can counteract the inhibitory action of Aβ, which contributes to perpetual capability for synaptic plasticity
- …