Exploring a Place-Based Approach to Materials Design: Harakeke Nonwovens in Aotearoa New Zealand

As the interdisciplinary field of materials design expands, pressing environmental, social and economic crises mean that the impacts of materials are more clearly perceived (Drazin 2015). This presents a challenge to activate materials towards positive change. Design practices that are relational, place based and deeply attuned to justice and the Earth are needed (Escobar 2017). What might such practices look like within the field of materials design? And how might they be informed by textiles practice? To address these questions, this paper presents and reflects upon a recent study into the development of harakeke (Phormium Tenax/New Zealand Flax) based nonwovens. The aim of the study was to support the re-establishment of harakeke based industry in Aotearoa New Zealand, which recent research suggests could address a range of environmental, social and economic problems specific to the region (McGruddy 2006). The approach taken drew on notions of place-based design and textile thinking, and was underpinned by a collaboration between university based design researchers, an agricultural and a forestry/ biomaterials research institute, an independent designer and an expert in traditional harakeke weaving. An initial review of materials design, research and developments that are predicated on regionally specific resources and knowledge was undertaken. Processing trials were conducted that brought together knowledge from indigenous harakeke weaving practice, fine art practices, industrially based fibre processing techniques and biopolymer processing. The resulting new materials were qualitatively evaluated using emergent models of experiential characterization (Camere and Karana 2018), which showed potential for the materials to be developed towards applications including architectural surfaces and packaging

Learnings from Poulet du Faso

The Poulet du Faso initiative aimed to improve the genetics and control of infectious diseases of local chickens, by crossing local cockerels with exotic Sasso hens, and kick-starting large-scale production of vaccinated day-old-chicks. This brief describes key lessons learned during the project and factors for success to consider in the design and implementation of future projects

Learnings from Vache du Faso

The Vache du Faso project aimed to improve milk production in Burkina Faso by crossbreeding local low-yielding zebu cattle with more productive dairy breeds through fixed-time artificial insemination (AI). This brief describes key lessons learned and factors for success to consider in the design and implementation of future projects

Sustainability of Poulet du Faso

The Poulet du Faso initiative aimed to improve the genetics and control of infectious diseases of local chickens, by crossing local cockerels with exotic hens, and kick-starting large-scale production of vaccinated day-old-chicks. The initiative has been highly successful in developing a sustainable distribution network adapted to local conditions. This brief describes key features that contributed to the initiative’s continued success, for future projects to consider

Determination of the magnetization profile of Co/Mg periodic multilayers by magneto-optic Kerr effect and X-ray magnetic resonant reflectivity

The resonant magnetic reflectivity of Co/Mg multilayers around the Co L2,3 absorption edge is simulated then measured on a specifically designed sample. The dichroic signal is obtained when making the difference between the two reflectivities measured with the magnetic field applied in two opposite directions parallel to the sample surface. The simulations show that the existence of magnetic dead layers at the interfaces between the Co and Mg layers leads to an important increase of the dichroic signal measured in the vicinity of the third Bragg peak that otherwise should be negligible. The measurements are in agreement with the model introducing 0.25 nm thick dead layers. This is attributed to the Co atoms in contact with the Mg layers and thus we conclude that the Co-Mg interfaces are abrupt from the magnetic point of view.Comment: 8 page

Investigation of the thermal stability of Mg/Co periodic multilayers for EUV applications

We present the results of the characterization of Mg/Co periodic multilayers and their thermal stability for the EUV range. The annealing study is performed up to a temperature of 400\degree C. Images obtained by scanning transmission electron microscopy and electron energy loss spectroscopy clearly show the good quality of the multilayer structure. The measurements of the EUV reflectivity around 25 nm (~49 eV) indicate that the reflectivity decreases when the annealing temperature increases above 300\degreeC. X-ray emission spectroscopy is performed to determine the chemical state of the Mg atoms within the Mg/Co multilayer. Nuclear magnetic resonance used to determine the chemical state of the Co atoms and scanning electron microscopy images of cross sections of the Mg/Co multilayers reveal changes in the morphology of the stack from an annealing temperature of 305\degreee;C. This explains the observed reflectivity loss.Comment: Published in Applied Physics A: Materials Science \& Processing Published at http://www.springerlink.com.chimie.gate.inist.fr/content/6v396j6m56771r61/ 21 page

Anterolateral ligament reconstruction does not delay functional recovery, rehabilitation, and return to sport after anterior cruciate ligament reconstruction. A matched-pair analysis from the SANTI (Scientific ACL Network International) Study Group

Purpose: To determine whether the addition of an anterolateral ligament reconstruction (ALLR) resulted in delayed functional recovery (based on the Knee Santy Athletic Return to Sport [K-STARTS] score) at 6 months after anterior cruciate ligament reconstruction (ACLR). Methods: A retrospective analysis of prospectively collected data from consecutive pa- tients who underwent an ACLR between September 2017 and December 2020 was conducted. Patients who received an isolated hamstring autograft (isolated ACLR group) were propensity matched in a 1:1 ratio to patients who received a hamstring autograft ACLR combined with an ALLR (ACLR-ALLR group). Outcome measures included the Tegner Activity Scale and the K-STARTS testda validated composite return-to-sports test (including the Anterior Cruciate LigamenteReturn to Sport After Injury scale, Qualitative Assessment of Single-Leg Landing tool, limb symmetry index, and ability to change direction using the Modified Illinois Change of Direction Test). Results: The study included 111 matched pairs. At 6 months postoperatively, there were no significant differences between groups in the overall K-STARTS score (65.4 for isolated ACLR vs 61.2 for ACLR-ALLR, P 1⁄4 .087) or the Tegner Activity Scale score (3.7 for isolated ACLR vs 3.8 for ACLR-ALLR, P 1⁄4 .45). In addition, an evaluation of the subscales of the K-STARTS score revealed no disadvantage across the domains of neuromuscular control, limb symmetry index, agility, or psychological readiness to return to sport when an ALLR was performed. Conclusions: The addition of ALLR at the time of ACLR does not delay functional recovery. Spe- cifically, at 6 months postoperatively, there was no disadvantage in patients undergoing ALLR-ACLR, when compared with those undergoing isolated ACLR, with respect to neuromuscular control, limb symmetry indices (hop tests), agility, or psychological readiness to return to sport

Transcriptome Sequencing of Hevea brasiliensis for Development of Microsatellite Markers and Construction of a Genetic Linkage Map

To obtain more information on the Hevea brasiliensis genome, we sequenced the transcriptome from the vegetative shoot apex yielding 2 311 497 reads. Clustering and assembly of the reads produced a total of 113 313 unique sequences, comprising 28 387 isotigs and 84 926 singletons. Also, 17 819 expressed sequence tag (EST)-simple sequence repeats (SSRs) were identified from the data set. To demonstrate the use of this EST resource for marker development, primers were designed for 430 of the EST-SSRs. Three hundred and twenty-three primer pairs were amplifiable in H. brasiliensis clones. Polymorphic information content values of selected 47 SSRs among 20 H. brasiliensis clones ranged from 0.13 to 0.71, with an average of 0.51. A dendrogram of genetic similarities between the 20 H. brasiliensis clones using these 47 EST-SSRs suggested two distinct groups that correlated well with clone pedigree. These novel EST-SSRs together with the published SSRs were used for the construction of an integrated parental linkage map of H. brasiliensis based on 81 lines of an F1 mapping population. The map consisted of 97 loci, consisting of 37 novel EST-SSRs and 60 published SSRs, distributed on 23 linkage groups and covered 842.9 cM with a mean interval of 11.9 cM and ∼4 loci per linkage group. Although the numbers of linkage groups exceed the haploid number (18), but with several common markers between homologous linkage groups with the previous map indicated that the F1 map in this study is appropriate for further study in marker-assisted selection