Tellurium retention by containment spray system

A containment spray system is used to mitigate the source term from the containment building to the environment as part of the severe accident management actions. Tellurium is one of the volatile fission products and many of the tellurium isotopes decay into iodine, which causes a threat to the public due to its radiotoxicity and build-up in the thyroid gland. The removal efficiency of the containment spray system model against tellurium species formed under severe accident conditions was investigated with experiments and MELCOR simulations. The results indicated efficient removal of tellurium aerosols in the air atmosphere, whereas a decrease in the efficiency was observed in the nitrogen atmosphere. Gaseous tellurium species were not formed in significant amounts during the experiments and therefore, the removal efficiency due to different spray chemistry conditions could not be accurately analysed. However, the alkaline chemicals used in the spray solution seemed to form airborne particles, increasing the overall aerosol transport in the process independently of CsI or Te aerosol transport

BVOC ecosystem flux measurements at a high latitude wetland site

In this study, we present summertime concentrations and fluxes of biogenic volatile organic compounds (BVOCs) measured at a sub-arctic wetland in northern Sweden using a disjunct eddy-covariance (DEC) technique based on a proton transfer reaction mass spectrometer (PTR-MS). The vegetation at the site was dominated by <i>Sphagnum</i>, <i>Carex</i> and extit{Eriophorum} spp. The measurements reported here cover a period of 50 days (1 August to 19 September 2006), approximately one half of the growing season at the site, and allowed to investigate the effect of day-to-day variation in weather as well as of vegetation senescence on daily BVOC fluxes, and on their temperature and light responses. The sensitivity drift of the DEC system was assessed by comparing H<sub>3</sub>O<sup>+</sup>-ion cluster formed with water molecules (H<sub>3</sub>O<sup>+</sup>(H<sub>2</sub>O) at m37) with water vapour concentration measurements made using an adjacent humidity sensor, and the applicability of the DEC method was analysed by a comparison of sensible heat fluxes for high frequency and DEC data obtained from the sonic anemometer. These analyses showed no significant PTR-MS sensor drift over a period of several weeks and only a small flux-loss due to high-frequency spectrum omissions. This loss was within the range expected from other studies and the theoretical considerations. <br><br> Standardised (20 °C and 1000 μmol m<sup>−2</sup> s<sup>−1</sup> PAR) summer isoprene emission rates found in this study of 329 μg C m<sup>−2</sup> (ground area) h<sup>−1</sup> were comparable with findings from more southern boreal forests, and fen-like ecosystems. On a diel scale, measured fluxes indicated a stronger temperature dependence than emissions from temperate or (sub)tropical ecosystems. For the first time, to our knowledge, we report ecosystem methanol fluxes from a sub-arctic ecosystem. Maximum daytime emission fluxes were around 270 μg m<sup>−2</sup> h<sup>−1</sup> (ca. 100 μg C m<sup>−2</sup> h<sup>−1</sup>), and during most nights small negative fluxes directed from the atmosphere to the surface were observed

Separation of rare earths and other valuable metals from deep-eutectic solvents: a new alternative for the recycling of used NdFeB magnets

Deep-eutectic solvents (DESs) are used as a promising alternative to aqueous solutions for the recovery of valuable metals from NdFeB magnets. A deep-eutectic solvent based on choline chloride and lactic acid (molar ratio 1 : 2) was used for the leaching of rare earths and other metals from NdFeB magnets. A process for the separation of Fe, B and Co from Nd and Dy in the deep-eutectic solvent was developed by using the ionic liquid tricaprylmethylammonium thiocyanate (Aliquat 336 SCN, [A336][SCN]) diluted in toluene (0.9 M). The extraction parameters were optimized and stripping of B was efficiently carried out by HCl, while EDTA was employed for the recovery of Fe and Co. The separation of Nd and Dy was assessed by using two different types of extractants, a mixture of trialkylphosphine oxides (Cyanex 923) and bis(2-ethylhexyl) phosphoric acid (D2EHPA). Based on the distribution ratios, separation factors and the ease of subsequent stripping, Cyanex 923 was chosen as the most effective extractant. The purified Dy present in the less polar phase was easily recovered by stripping with water, while the Nd present in the deep-eutectic solvent was recovered by precipitation stripping with a stoichiometric amount of oxalic acid. Nd2O3 and Dy2O3 were recovered with a purity of 99.87% and 99.94%, respectively. The feasibility to scale up this separation process was corroborated by a setup of mixer-settlers and highlighted by the possibility to fully recover and reuse the deep-eutectic solvent and the less polar phases employed in the extractions. The new proposed system based on a deep-eutectic solvent combined with traditional organic extraction phases presented higher selectivities and efficiencies than the analogous aqueous system. Extended X-ray absorption fine structure (EXAFS) was employed to elucidate the different mechanisms for extraction of Co and Fe from the deep-eutectic solvent and from an aqueous solution

Guided web-based cognitive behavior therapy for perfectionism: Results from two different randomized controlled trials

© 2018 The authors. Background: Perfectionism can become a debilitating condition that may negatively affect functioning in multiple areas, including mental health. Prior research has indicated that internet-based cognitive behavioral therapy can be beneficial, but few studies have included follow-up data. Objective: The objective of this study was to explore the outcomes at follow-up of internet-based cognitive behavioral therapy with guided self-help, delivered as 2 separate randomized controlled trials conducted in Sweden and the United Kingdom. Methods: In total, 120 participants randomly assigned to internet-based cognitive behavioral therapy were included in both intention-to-treat and completer analyses: 78 in the Swedish trial and 62 in the UK trial. The primary outcome measure was the Frost Multidimensional Perfectionism Scale, Concern over Mistakes subscale (FMPS CM). Secondary outcome measures varied between the trials and consisted of the Clinical Perfectionism Questionnaire (CPQ; both trials), the 9-item Patient Health Questionnaire (PHQ-9; Swedish trial), the 7-item Generalized Anxiety Disorder scale (GAD-7; Swedish trial), and the 21-item Depression Anxiety Stress Scale (DASS-21; UK trial). Follow-up occurred after 6 months for the UK trial and after 12 months for the Swedish trial. Results: Analysis of covariance revealed a significant difference between pretreatment and follow-up in both studies. Intention-to-treat within-group Cohen d effect sizes were 1.21 (Swedish trial; 95% CI 0.86-1.54) and 1.24 (UK trial; 95% CI 0.85-1.62) for the FMPS CM. Furthermore, 29 (59%; Swedish trial) and 15 (43%; UK trial) of the participants met the criteria for recovery on the FMPS CM. Improvements were also significant for the CPQ, with effect sizes of 1.32 (Swedish trial; 95% CI 0.97-1.66) and 1.49 (UK trial; 95% CI 1.09-1.88); the PHQ-9, effect size 0.60 (95% CI 0.28-0.92); the GAD-7, effect size 0.67 (95% CI 0.34-0.99); and the DASS-21, effect size 0.50 (95% CI 0.13-0.85). Conclusions: The results are promising for the use of internet-based cognitive behavioral therapy as a way of targeting perfectionism, but the findings need to be replicated and include a comparison condition

Porosity measurements in suspension plasma sprayed YSZ coatings using NMR cryoporometry and X-ray microscopy

A large variety of coatings are used to protect structural engineering materials from corrosion, wear, and erosion, and to provide thermal insulation. In this work, yttria-stabilized zirconia coatings produced by suspension plasma spraying were investigated with respect to their microstructure and especially their porosity, as the porosity affects the thermal insulation of the underlying component. To determine porosity, pore size distribution, and pore shape, the coatings were investigated using novel advanced characterization techniques like NMR cryoporometry and X-ray microscopy. In general, the porosity is inhomogeneously distributed and the coatings showed a large variety of pore sizes ranging from a few nanometers to micrometers

Engineering tyrosine-based electron flow pathways in proteins: The case of aplysia myoglobin

Tyrosine residues can act as redox cofactors that provide an electron transfer ("hole-hopping") route that enhances the rate of ferryl heme iron reduction by externally added reductants, for example, ascorbate. Aplysia fasciata myoglobin, having no naturally occurring tyrosines but 15 phenylalanines that can be selectively mutated to tyrosine residues, provides an ideal protein with which to study such through-protein electron transfer pathways and ways to manipulate them. Two surface exposed phenylalanines that are close to the heme have been mutated to tyrosines (F42Y, F98Y). In both of these, the rate of ferryl heme reduction increased by up to 3 orders of magnitude. This result cannot be explained in terms of distance or redox potential change between donor and acceptor but indicates that tyrosines, by virtue of their ability to form radicals, act as redox cofactors in a new pathway. The mechanism is discussed in terms of the Marcus theory and the specific protonation/deprotonation states of the oxoferryl iron and tyrosine. Tyrosine radicals have been observed and quantified by EPR spectroscopy in both mutants, consistent with the proposed mechanism. The location of each radical is unambiguous and allows us to validate theoretical methods that assign radical location on the basis of EPR hyperfine structure. Mutation to tyrosine decreases the lipid peroxidase activity of this myoglobin in the presence of low concentrations of reductant, and the possibility of decreasing the intrinsic toxicity of hemoglobin by introduction of these pathways is discussed. © 2012 American Chemical Society

Monitor 1981

The experimental proton beam line at the Clinton P. Anderson Meson Physics Facility (LAMPF) is maintained remotely (because of high radiation levels) by a specially designed remote handling system called Monitor. The prototype Monitor unit was placed in service in 1976 to repair highly activated components in the LAMPF beam stop. Since that time, the Monitor system has been continually improved to keep pace with more complex maintenance tasks and ever-increasing radiation levels in the experimental areas. To ensure that the facility can be maintained on a timely basis, a second Monitor unit was commissioned in 1980. The improvements in the Monitor system and components have increased the efficiency of LAMPF's remote-maintenance operations by a factor of two. The technology developed has advanced to the state where it can be directly applied to other applications or industries that may potentially compromise health and/or safety of workers

An overview of solvent extraction processes developed in Europe for advanced nuclear fuel recycling, Part 2 — homogeneous recycling

The hydrometallurgical separation concepts for the recycling of irradiated nuclear fuels developed in Europe are presented and discussed. Whilst Part 1 of the review focused on concepts for heterogeneous recycling of minor actinides, this article focuses on group recycling of transuranic actinides, which would support homogeneous recycling scenarios. Most of these concepts were developed within European collaborative projects and involve solvent extraction processes separating all the actinides (U-Cm) in two cycles. The first cycle uses a monoamide extractant to recover uranium leaving all the transuranic actinides in the aqueous raffinate with the fission products. The second cycle aims for a group recovery of the transuranium elements and several strategies have been proposed for this stage. In this review article, the various solvent extraction processes are summarised and the key features of the process schemes are compared

Boron Abundances in Main Sequence B-type Stars: A Test of Rotational Depletion during Main Sequence Evolution

Boron abundances have been derived for seven main sequence B-type stars from HST STIS spectra around the B III 2066 A line. In two stars, boron appears to be undepleted with respect to the presumed initial abundance. In one star, boron is detectable but it is clearly depleted. In the other four stars, boron is undetectable implying depletions of 1 to 2 dex. Three of these four stars are nitrogen enriched, but the fourth shows no enrichment of nitrogen. Only rotationally induced mixing predicts that boron depletions are unaccompanied by nitrogen enrichments. The inferred rate of boron depletion from our observations is in good agreement with these predictions. Other boron-depleted nitrogen-normal stars are identified from the literature. Also, several boron-depleted nitrogen-rich stars are identified, and while all fall on the boron-nitrogen trend predicted by rotationally-induced mixing, a majority have nitrogen enrichments that are not uniquely explained by rotation. The spectra have also been used to determine iron-group (Cr, Mn, Fe, and Ni) abundances. The seven B-type stars have near solar iron-group abundances, as expected for young stars in the solar neighborhood. We have also analysed the halo B-type star, PG0832+676. We find [Fe/H] = -0.88 +/- 0.10, and the absence of the B III line gives the upper limit [B/H]<2.5. These and other published abundances are used to infer the star's evolutionary status as a post-AGB star.Comment: 31 pages, 14 figures. accepted to Ap