Wear mechanism of olivine at the small-scale: An in situ TEM study

The study of tribology includes wear, friction, and lubrication of interacting surfaces in relative motions. Since the function, efficiency, and lifetime of many engineering components depend on the appropriate friction and wear properties, the study of tribology has significant practical importance. However, traditional tribology tests are limited by the inability to observe real-time progress of the sliding contacts and wear mechanism. Recent developments in small-scale devices, particularly piezoelectric and MEMS-based actuators, aid in conducting scratches at the micro- and nano-scale in the TEM. Olivine is magnesium iron silicate (Mg²⁺, Fe²⁺)₂SiO₄ and the most abundant mineral in earth\u27s upper mantle, which comprises the bulk of the planet\u27s tectonic plates. Although the structure of olivine has been intensively studied by mineralogists and geophysicists, the frictional and mechanical properties particularly damage evolution at the small-scale of sliding contact is unknown. In this study, a bulk olivine sample was wedge polished and then fib-milled to prepare electron-transparent regions. A wedge diamond indenter of 100 nm radius and 3 um length was used to make sliding contact using a PI 95, TEM PicoIndenter. Multicycle scratch tests were conducted to understand wear behavior. During the wear passes, the kinetic friction coefficient remained relatively constant near 0.1 and substantial dislocation plasticity occurred in the sample. Each pass showed nucleation of additional dislocations which were arranged in a symmetric array along the wear path as shown in fig. 1. The talk will present a theory of friction and deformation behavior that are applicable to geological materials. Please click Additional Files below to see the full abstract

Integration of TTF, UTAUT, and ITM for mobile Banking Adoption

The introduction of mobile banking facility has enabled customers to carry out banking transactionswith the use of smartphones and other handheld devices from anywhere. It has become a luxurious and exclusive method of online payments. The recent growth of telecommunication sector and a tremendous increase in mobile USAge has opened new doors for sparking future of banking sector industry. The following research is aimed to find out the mobile banking adoption attitudes with the integration of TTF, UTAUT,and ITM models

Plastic flow and failure resistance of metallic glass: Insight from \u3cem\u3ein situ\u3c/em\u3e compression of nanopillars

We report in situ nanocompression tests of Cu-Zr-Al metallic glass (MG) pillars in a transmission electron microscope. This technique is capable of spatially and temporally resolving the plastic flow in MGs. The observations reveal the intrinsic ability of fully glassy MGs to sustain large plastic strains, which would otherwise be preempted by catastrophic instability in macroscopic samples and conventional tests. The high ductility in volume-limited MGs and the sample size effects in suppressing the rapid failure common to MGs are analyzed by modeling the evolution of the collectivity of flow defects toward localization

Structural Reinforcement through Liquid Encapsulation

The liquid inside a solid material is one of the most common composite materials in nature. The interface between solid–liquid plays an important role in unique deformation. Here, model systems of two polymers (polydimethylsiloxane–polyvinylidenefluoride) are used to make sphere of solid with liquid inside it

\u3cem\u3eIn Situ\u3c/em\u3e Nanomechanical Testing in Focused Ion Beam and Scanning Electron Microscopes

The recent interest in size-dependent deformation of micro- and nanoscale materials has paralleled both technological miniaturization and advancements in imaging and small-scale mechanical testing methods. Here we describe a quantitative in situ nanomechanical testing approach adapted to a dualbeam focused ion beam and scanning electron microscope. A transducer based on a three-plate capacitor system is used for high-fidelity force and displacement measurements. Specimen manipulation, transfer, and alignment are performed using a manipulator, independently controlled positioners, and the focused ion beam. Gripping of specimens is achieved using electron-beam assisted Pt-organic deposition. Local strain measurements are obtained using digital image correlation of electron images taken during testing. Examples showing results for tensile testing of single-crystalline metallic nanowires and compression of nanoporous Au pillars will be presented in the context of size effects on mechanical behavior and highlight some of the challenges of conducting nanomechanical testing in vacuum environments

Physical activity, smoking, and genetic predisposition to obesity in people from Pakistan:the PROMIS study

Background: Multiple genetic variants have been reliably associated with obesity-related traits in Europeans, but little is known about their associations and interactions with lifestyle factors in South Asians. Methods: In 16,157 Pakistani adults (8232 controls; 7925 diagnosed with myocardial infarction [MI]) enrolled in the PROMIS Study, we tested whether: a) BMI-associated loci, individually or in aggregate (as a genetic risk score - GRS), are associated with BMI; b) physical activity and smoking modify the association of these loci with BMI. Analyses were adjusted for age, age(2), sex, MI (yes/no), and population substructure. Results: Of 95 SNPs studied here, 73 showed directionally consistent effects on BMI as reported in Europeans. Each additional BMI-raising allele of the GRS was associated with 0.04 (SE = 0.01) kg/m(2) higher BMI (P = 4.5 x 10(-14)). We observed nominal evidence of interactions of CLIP1 rs11583200 (P-interaction = 0.014), CADM2 rs13078960 (P-interaction = 0.037) and GALNT10 rs7715256 (P-interaction = 0.048) with physical activity, and PTBP2 rs11165643 (P-interaction = 0.045), HIP1 rs1167827 (P-interaction = 0.015), C6orf106 rs205262 (P-interaction = 0.032) and GRID1 rs7899106 (P-interaction = 0.043) with smoking on BMI. Conclusions: Most BMI-associated loci have directionally consistent effects on BMI in Pakistanis and Europeans. There were suggestive interactions of established BMI-related SNPs with smoking or physical activity

Bleeding disorders in the tribe: result of consanguineous in breeding

<p>Abstract</p> <p>Objective</p> <p>To determine the frequency and clinical features of bleeding disorders in the tribe as a result of consanguineous marriages.</p> <p>Design</p> <p>Cross Sectional Study</p> <p>Introduction</p> <p>Countries in which consanguinity is a normal practice, these rare autosomal recessive disorders run in close families and tribes. Here we describe a family, living in village Ali Murad Chandio, District Badin, labeled as haemophilia.</p> <p>Patients & Methods</p> <p>Our team visited the village & developed the pedigree of the whole extended family, up to seven generations. Performa was filled by incorporating patients, family history of bleeding, signs & symptoms, and bleeding from any site. From them 144 individuals were screened with CBC, bleeding time, platelet aggregation studies & RiCoF. While for PT, APTT, VWF assay and Factor VIII assay, samples were kept frozen at -70 degrees C until tested.</p> <p>Results</p> <p>The family tree of the seven generations comprises of 533 individuals, 63 subjects died over a period of 20 years and 470 were alive. Out of all those 144 subjects were selected on the basis of the bleeding history. Among them 98(68.1%) were diagnosed to have a bleeding disorder; 44.9% patients were male and 55.1% patients were female. Median age of all the patients was 20.81, range (4 months- 80 yrs). The results of bleeding have shown that majority had gum bleeding, epistaxis and menorrhagia. Most common bleeding disorder was Von Willebrand disease and Platelet functional disorders.</p> <p>Conclusion</p> <p>Consanguineous marriages keep all the beneficial and adversely affecting recessive genes within the family; in homozygous states. These genes express themselves and result in life threatening diseases. Awareness, education & genetic counseling will be needed to prevent the spread of such common occurrence of these bleeding disorders in the community.</p

Effects of hospital facilities on patient outcomes after cancer surgery: an international, prospective, observational study

Background Early death after cancer surgery is higher in low-income and middle-income countries (LMICs) compared with in high-income countries, yet the impact of facility characteristics on early postoperative outcomes is unknown. The aim of this study was to examine the association between hospital infrastructure, resource availability, and processes on early outcomes after cancer surgery worldwide.Methods A multimethods analysis was performed as part of the GlobalSurg 3 study-a multicentre, international, prospective cohort study of patients who had surgery for breast, colorectal, or gastric cancer. The primary outcomes were 30-day mortality and 30-day major complication rates. Potentially beneficial hospital facilities were identified by variable selection to select those associated with 30-day mortality. Adjusted outcomes were determined using generalised estimating equations to account for patient characteristics and country-income group, with population stratification by hospital.Findings Between April 1, 2018, and April 23, 2019, facility-level data were collected for 9685 patients across 238 hospitals in 66 countries (91 hospitals in 20 high-income countries; 57 hospitals in 19 upper-middle-income countries; and 90 hospitals in 27 low-income to lower-middle-income countries). The availability of five hospital facilities was inversely associated with mortality: ultrasound, CT scanner, critical care unit, opioid analgesia, and oncologist. After adjustment for case-mix and country income group, hospitals with three or fewer of these facilities (62 hospitals, 1294 patients) had higher mortality compared with those with four or five (adjusted odds ratio [OR] 3.85 [95% CI 2.58-5.75]; p&lt;0.0001), with excess mortality predominantly explained by a limited capacity to rescue following the development of major complications (63.0% vs 82.7%; OR 0.35 [0.23-0.53]; p&lt;0.0001). Across LMICs, improvements in hospital facilities would prevent one to three deaths for every 100 patients undergoing surgery for cancer.Interpretation Hospitals with higher levels of infrastructure and resources have better outcomes after cancer surgery, independent of country income. Without urgent strengthening of hospital infrastructure and resources, the reductions in cancer-associated mortality associated with improved access will not be realised