68 research outputs found

    A Solar PV Based Multistage Grid Tie Inverter

    Get PDF
    The inherent advantage of fuel less and maintenance free energy production from solar photovoltaic makes it a very important source of energy. For harnessing power from the solar photovoltaic (PV) cell/array and to supply it to the utility grid, dc to ac inverters is needed. The conventional line commutated dc-to-ac inverter has square shaped line current which contains higher order harmonics whereas PWM based inverters employing IGBT/ MOSFET are less reliable and has low power handling capability. Moreover, a dc-to-dc converter is generally employed along with the inverter circuit to operate the solar PV array at maximum power point. It adds to the cost, which increases with the size of the system. This paper describes a multistage series converter topology for solar PV based grid tie inverter with low harmonic in line current and inbuilt maximum power point tracking (MPPT) features. The developed prototype has been experimentally tested and verified.Keywords: Multistage converter, Grid tie inverter, Maximum power point tracker (MPPT), Total harmonic distortion, photovoltaic system

    Exergoeconomic optimization of a shell-and-tube heat exchanger

    Get PDF
    The paper presents an economic optimization of a STHX with two commonly adopted (i.e., Kern and Bell-Delaware) and one rarely explored (i.e., Wills-Johnston) methods. A detailed numerical code concerning thermal, hydraulic, exergy, and economic analysis of STHX is developed for all three methods. Normalized sensitivity analysis, parametric study, and Genetic Algorithm are used to ascertain the most influential parameters and optimize the total cost. It is observed that the calculations made using the Wills-Johnston method were reasonably close to the Bell-Delaware method. While the Kern method showed a significant deviation in the shell side calculations because of the several assumptions in this method. The parametric analysis showed that increasing the mass flow rate and the number of baffles increased the operating cost because of an exponential increase in the pressure drops. Finally, the optimization reduced the heat transfer area by ~26.4%, capital cost by ~20%, operational cost by ~50%, total cost by ~22%, and the stream cost by ~21%

    Exergoeconomic and Normalized Sensitivity Analysis of Plate Heat Exchangers: A Theoretical Framework with Application

    Get PDF
    Heat exchangers are the mainstay of thermal systems and have been extensively used in desalination systems, heating, cooling units, power plants, and energy recovery systems. This chapter demonstrates a robust theoretical framework for heat exchangers investigation based on two advanced tools, i.e., exergoeconomic analysis and Normalized Sensitivity Analysis. The former is applied as a mutual application of economic and thermodynamic analyses, which is much more impactful than the conventional thermodynamic and economic analyses. This is because it allows the investigation of combinatory effects of thermodynamic and fiscal parameters which are not achieved with the conventional methods. Similarly, the Normalized Sensitivity Analysis allows a one-on-one comparison of the sensitivity of output parameters to the input parameters with entirely different magnitudes on a common platform. This rationale comparison is obtained by normalizing the sensitivity coefficients by their nominal values, which is not possible with the conventional sensitivity analyses. An experimentally validated example of a plate heat exchanger is used to demonstrate the application of the proposed framework from a desalination system

    Optimizing the Energy Recovery Section in Thermal Desalination Systems for Improved Thermodynamic, Economic, and Environmental Performance

    Get PDF
    Integration of energy recovery section with thermal desalination systems improves their performance from thermodynamics, economics, and environmental viewpoints. This is because it significantly reduces input energy, heat transfer area, and capital cost requirements. Above all, the system outlet streams can achieve thermal equilibrium with the environment by supplying heat for useful preheating purposes thus reducing the environmental impacts. The plate heat exchangers are generally employed for this purpose as preheaters. The current paper presents a comprehensive investigation and optimization of these heat exchangers for thermal desalination systems applications. An experimentally validated numerical model employing Normalized Sensitivity Analysis and Genetic Algorithm based cost optimization is developed to investigate their performance at assorted operating conditions. The analysis showed that the heat transfer coefficient, pressure drop, and outlet water cost were improved by an increase in feed flow rate. However, with an increased flow rate, the comprehensive output parameter (h/ΔP) decreased due to the high degree increase in pressure drop. Moreover, an increase in the chevron angle reduced the heat transfer coefficient, pressure drop, and water cost. Finally, the optimization lowered the heat transfer area by ~79.5%, capital investment by ~62%, and the outlet cost of the cold stream by ~15.7%. The operational cost is increased due to the increased pressure drop but the overall impact is beneficial as Ctotal of equipment is reduced by ~52.7%

    A comprehensive design and optimization of an offset strip-fin compact heat exchanger for energy recovery systems

    Get PDF
    Energy recovery in conventional thermal systems like power plants, refrigeration systems, and air conditioning systems has enhanced their thermodynamic and economic performance. In this regard, compact heat exchangers are the most employed for gas to gas energy recovery because of their better thermal performance. This paper presents an economic optimization of a crossflow plate-fin heat exchanger with offset strip fins. A detailed software-based numerical code for thermal, hydraulic, economic, and exergy analysis is developed for three fin geometries. Genetic Algorithm, parametric, and normalized sensitivity analyses are used to discover the most influential parameters to optimize the total cost. The parametric study showed that with the increase of mass flow rates and plate spacing, outlet stream cost and operating cost increased due to the rise in pressure drops. Finally, the optimization reduced the operational cost by ∼78.5%, stream cost by ∼64.5%, and total cost by ∼76.8%

    Molecular typing of ST239-MRSA-III from diverse geographic locations and the evolution of the SCCmec III element during its intercontinental spread

    Get PDF
    ST239-MRSA-III is probably the oldest truly pandemic MRSA strain, circulating in many countries since the 1970s. It is still frequently isolated in some parts of the world although it has been replaced by other MRSA strains in, e.g., most of Europe. Previous genotyping work (Harris et al., 2010; Castillo-Ramírez et al., 2012) suggested a split in geographically defined clades. In the present study, a collection of 184 ST239-MRSA-III isolates, mainly from countries not covered by the previous studies were characterized using two DNA microarrays (i) targeting an extensive range of typing markers, virulence and resistance genes and (ii) a SCCmec subtyping array. Thirty additional isolates underwent whole-genome sequencing (WGS) and, together with published WGS data for 215 ST239-MRSA-III isolates, were analyzed using in-silico analysis for comparison with the microarray data and with special regard to variation within SCCmec elements. This permitted the assignment of isolates and sequences to 39 different SCCmec III subtypes, and to three major and several minor clades. One clade, characterized by the integration of a transposon into nsaB and by the loss of fnbB and splE was detected among isolates from Turkey, Romania and other Eastern European countries, Russia, Pakistan, and (mainly Northern) China. Another clade, harboring sasX/sesI is widespread in South-East Asia including China/Hong Kong, and surprisingly also in Trinidad & Tobago. A third, related, but sasX/sesI-negative clade occurs not only in Latin America but also in Russia and in the Middle East from where it apparently originated and from where it also was transferred to Ireland. Minor clades exist or existed in Western Europe and Greece, in Portugal, in Australia and New Zealand as well as in the Middle East. Isolates from countries where this strain is not epidemic (such as Germany) frequently are associated with foreign travel and/or hospitalization abroad. The wide dissemination of this strain and the fact that it was able to cause a hospital-borne pandemic that lasted nearly 50 years emphasizes the need for stringent infection prevention and control and admission screening

    Syncope: experience at a tertiary care hospital in Karachi, Pakistan

    Get PDF
    Introduction:Our aim was to determine the characteristics of Patients presenting with syncope at a tertiary care hospital in Karachi, Pakistan.Methods: A review of medical records was conducted retrospectively at the Department of Medicine, Aga Khan University Hospital, Karachi. Patients aged 16 and above, admitted from January 2000 to December 2005 with the diagnosis of syncope made by the attending physician were included.Results:A total of 269 Patients were included (75% males, mean age: 57.4 years). Neurogenic (vasovagal) syncope was the most common cause (47%), followed by cardiogenic syncope (18%) and orthostatic syncope (9%). A total of 24% were discharged undiagnosed. Twenty Patients (7.4%) did not have any prodrome. Common prodromal symptoms included dizziness (61%), sweating (25%), palpitations (19%), nausea/vomiting (19%) and visual symptoms (17%). The distribution of symptoms according to cause of syncope revealed only breathlessness to be significantly associated with cardiogenic syncope (p = 0.002). Most Patients with cardiogenic syncope were aged above 40 (98%, p \u3c 0.001), had coronary artery disease (72%, p \u3c 0.001) and abnormal electrocardiogram at presentation (92%, p \u3c 0.001).Conclusion:Despite differences in burden of diseases, our findings were similar to those of published syncope literature. Further studies are needed to develop a protocol to expedite the evaluation and limit the work-up and admission in low-risk Patients

    Erratum to: 36th International Symposium on Intensive Care and Emergency Medicine

    Get PDF
    [This corrects the article DOI: 10.1186/s13054-016-1208-6.]
    corecore