Cosmic ray records in Antarctic meteorites

The cosmogenic radionuclides Be(10), Al(26), and Mn(53) and noble gases were determined in more than 28 meteorites from Antarctica by nuclear analytical techniques and static mass spectrometry, respectively. The summarized results are listed. The concentrations of Al(26) and Mn(53) are normalized to the repective main target elements and given in dpm/kg Si sub eq and dpm/kg Fe. The errors stated include statistical as well as systematical errors. For noble gas concentrations estimated errors are 5% and for isotopic ratios 1.5%. Cosmic ray exposure ages T sub 21 were calculated by the noble gas concentrations and the terrestrial residence time (T) on the basis of the spallogenic nuclide Al(26). The suggested pairing of the LL6 chondrite RKPA 80238 and RKPA 80248 and the eucrites ALHA 76005 and ALHA 79017 is confirmed not only by the noble gas data but also by the concentrations of the spallation produced radionuclides. Futhermore, ALHA 80122, clasified as an H6 chondrite, has a noble gas pattern which suggest that this meteorite belongs to the ALHA 80111 shower

Yeni turan

Halide Edip'in Tanin'de tefrika edilen Yeni Turan adlı romanıTelif hakları nedeniyle romanın tam metni verilememiştir

Cosmogenic rare gases and 10-Be in a cross section of Knyahinya

The concentrations of cosmogenic nuclides were studied as a function of shielding on samples from a cross section of the 293 kg main fragment of the L5 chondrite Knyahinya. The stone broke into two nearly symmetrical parts upon its fall in 1866. The planar cross section has diameters between 40 and 55 cm. He, Ne, and Ar were measured on about 20 samples by mass spectrometry and the 10-Be activities on aliquots of 10 selected samples were determined by AMS. The 10-Be data are presented and the abundances of spallogenic nuclides are compared with the model calculations reported by Reedy for spherical L chondrites. The 10-Be production rates in Knyahinya are shown versus the shielding parameter 22-Ne/21-Ne

First-Principles Calculations of Hyperfine Interactions in La_2CuO_4

We present the results of first-principles cluster calculations of the electronic structure of La_2CuO_4. Several clusters containing up to nine copper atoms embedded in a background potential were investigated. Spin-polarized calculations were performed both at the Hartree-Fock level and with density functional methods with generalized gradient corrections to the local density approximation. The distinct results for the electronic structure obtained with these two methods are discussed. The dependence of the electric-field gradients at the Cu and the O sites on the cluster size is studied and the results are compared to experiments. The magnetic hyperfine coupling parameters are carefully examined. Special attention is given to a quantitative determination of on-site and transferred hyperfine fields. We provide a detailed analysis that compares the hyperfine fields obtained for various cluster sizes with results from additional calculations of spin states with different multiplicities. From this we conclude that hyperfine couplings are mainly transferred from nearest neighbor Cu^{2+} ions and that contributions from further distant neighbors are marginal. The mechanisms giving rise to transfer of spin density are worked out. Assuming conventional values for the spin-orbit coupling, the total calculated hyperfine interaction parameters are compared to informations from experiments.Comment: 23 pages, 9 figure

Measuring complete quantum states with a single observable

Experimental determination of an unknown quantum state usually requires several incompatible measurements. However, it is also possible to determine the full quantum state from a single, repeated measurement. For this purpose, the quantum system whose state is to be determined is first coupled to a second quantum system (the "assistant") in such a way that part of the information in the quantum state is transferred to the assistant. The actual measurement is then performed on the enlarged system including the original system and the assistant. We discuss in detail the requirements of this procedure and experimentally implement it on a simple quantum system consisting of nuclear spins.Comment: 11 pages, 6 figure

Aperiodic dynamical decoupling sequences in presence of pulse errors

Dynamical decoupling (DD) is a promising tool for preserving the quantum states of qubits. However, small imperfections in the control pulses can seriously affect the fidelity of decoupling, and qualitatively change the evolution of the controlled system at long times. Using both analytical and numerical tools, we theoretically investigate the effect of the pulse errors accumulation for two aperiodic DD sequences, the Uhrig's DD UDD) protocol [G. S. Uhrig, Phys. Rev. Lett. {\bf 98}, 100504 (2007)], and the Quadratic DD (QDD) protocol [J. R. West, B. H. Fong and D. A. Lidar, Phys. Rev. Lett {\bf 104}, 130501 (2010)]. We consider the implementation of these sequences using the electron spins of phosphorus donors in silicon, where DD sequences are applied to suppress dephasing of the donor spins. The dependence of the decoupling fidelity on different initial states of the spins is the focus of our study. We investigate in detail the initial drop in the DD fidelity, and its long-term saturation. We also demonstrate that by applying the control pulses along different directions, the performance of QDD protocols can be noticeably improved, and explain the reason of such an improvement. Our results can be useful for future implementations of the aperiodic decoupling protocols, and for better understanding of the impact of errors on quantum control of spins.Comment: updated reference

Variable pulmonary manifestations in Chitayat syndrome: Six additional affected individuals

Hand hyperphalangism leading to shortened index fingers with ulnar deviation, hallux valgus, mild facial dysmorphism and respiratory compromise requiring assisted ventilation are the key features of Chitayat syndrome. This condition results from the recurrent heterozygous missense variant NM_006494.2:c.266A>G; p.(Tyr89Cys) in ERF on chromosome 19q13.2, encoding the ETS2 repressor factor (ERF) protein. The pathomechanism of Chitayat syndrome is unknown. To date, seven individuals with Chitayat syndrome and the recurrent pathogenic ERF variant have been reported in the literature. Here, we describe six additional individuals, among them only one presenting with a history of assisted ventilation, and the remaining presenting with variable pulmonary phenotypes, including one individual without any obvious pulmonary manifestations. Our findings widen the phenotype spectrum caused by the recurrent pathogenic variant in ERF, underline Chitayat syndrome as a cause of isolated skeletal malformations and therefore contribute to the improvement of diagnostic strategies in individuals with hand hyperphalangism

Buttressing staples with cholecyst-derived extracellular matrix (CEM) reinforces staple lines in an ex vivo peristaltic inflation model

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ Springer Science + Business Media, LLC 2008Background - Staple line leakage and bleeding are the most common problems associated with the use of surgical staplers for gastrointestinal resection and anastomotic procedures. These complications can be reduced by reinforcing the staple lines with buttressing materials. The current study reports the potential use of cholecyst-derived extracellular matrix (CEM) in non-crosslinked (NCEM) and crosslinked (XCEM) forms, and compares their mechanical performance with clinically available buttress materials [small intestinal submucosa (SIS) and bovine pericardium (BP)] in an ex vivo small intestine model. Methods - Three crosslinked CEM variants (XCEM0005, XCEM001, and XCEM0033) with different degree of crosslinking were produced. An ex vivo peristaltic inflation model was established. Porcine small intestine segments were stapled on one end, using buttressed or non-buttressed surgical staplers. The opened, non-stapled ends were connected to a peristaltic pump and pressure transducer and sealed. The staple lines were then exposed to increased intraluminal pressure in a peristaltic manner. Both the leak and burst pressures of the test specimens were recorded. Results - The leak pressures observed for non-crosslinked NCEM (137.8 ± 22.3 mmHg), crosslinked XCEM0005 (109.1 ± 14.1 mmHg), XCEM001 (150.1 ± 16.0 mmHg), XCEM0033 (98.8 ± 10.5 mmHg) reinforced staple lines were significantly higher when compared to non-buttressed control (28.3 ± 10.8 mmHg) and SIS (one and four layers) (62.6 ± 11.8 and 57.6 ± 12.3 mmHg, respectively) buttressed staple lines. NCEM and XCEM were comparable to that observed for BP buttressed staple lines (138.8 ± 3.6 mmHg). Only specimens with reinforced staple lines were able to achieve high intraluminal pressures (ruptured at the intestinal mesentery), indicating that buttress reinforcements were able to withstand pressure higher than that of natural tissue (physiological failure). Conclusions - These findings suggest that the use of CEM and XCEM as buttressing materials is associated with reinforced staple lines and increased leak pressures when compared to non-buttressed staple lines. CEM and XCEM were found to perform comparably with clinically available buttress materials in this ex vivo model.Enterprise Irelan

Ethical procedures and patient consent differ in Europe

BACKGROUND: Research ethics approvals, procedures and requirements for institutional research ethics committees vary considerably by country and by type of organisation. OBJECTIVE: To evaluate the requirements and procedures of research ethics committees, details of patient information and informed consent based on a multicentre European trial. DESIGN: Survey of European hospitals participating in the prospective observational study on chronic postsurgical pain (euCPSP) using electronic questionnaires. SETTING: Twenty-four hospitals in 11 European countries. PARTICIPANTS: From the 24 hospitals, 23 local investigators responded; 23 answers were analysed. OUTCOME MEASURES: Comparison of research ethics procedures and committee requirements from the perspective of clinical researchers. Comparison of the institutions' procedures regarding patient information and consent. Description of further details such as costs and the duration of the approval process. RESULTS: The approval process lasted from less than 2 weeks up to more than 2 months with financial fees varying between 0 and 575 €. In 20 hospitals, a patient information sheet of variable length (half page up to two pages) was provided. Requirements for patients' informed consent differed. Written informed consent was mandatory at 12, oral at 10 and no form of consent at one hospital. Details such as enough time for consideration, possibility for withdrawal and risks/benefits of participation were provided in 25 to 30% of the institutions. CONCLUSION: There is a considerable variation in the administrative requirements for approval procedures by research ethics committees in Europe. This results in variation of the extent of information and consent procedures for the patients involved