Ultrathin Stable Ohmic Contacts for High-Temperature Operation of β\beta-Ga2_2O3_3 Devices

Beta gallium oxide ($\beta$-Ga$_2$O$_3$) shows significant promise in the high-temperature, high-power, and sensing electronics applications. However, long-term stable metallization layers for Ohmic contacts at high temperature present unique thermodynamic challenges. The current most common Ohmic contact design based on 20 nm of Ti has been repeatedly demonstrated to fail at even moderately elevated temperatures (300-400$^{\circ}$C) due to a combination of non-stoichiometric Ti/Ga$_2$O$_3$ interfacial reactions and kinetically favored Ti diffusion processes. Here we demonstrate stable Ohmic contacts for Ga$_2$O$_3$ devices operating up to 500-600$^{\circ}$C using ultrathin Ti layers with a self-limiting interfacial reaction. The ultrathin Ti layer in the 5nm Ti / 100nm Au contact stack is designed to fully oxidize while forming an Ohmic contact, thereby limiting both thermodynamic and kinetic instability. This novel contact design strategy results in an epitaxial conductive anatase titanium oxide interface layer that enables low-resistance Ohmic contacts that are stable both under long-term continuous operation (>500 hours) at 600$^{\circ}$C in vacuum ($\leq$ 10$^{-4}$ Torr), as well as after repeated thermal cycling (15 times) between room temperature and 550$^{\circ}$C in flowing N$_2$. This stable Ohmic contact design will accelerate the development of high-temperature devices by enabling research focus to shift towards rectifying contacts and other interfacial layers.Comment: 25 Pages, 7 Figure

Genomic architecture of adaptive color pattern divergence and convergence in Heliconius butterflies

Identifying the genetic changes driving adaptive variation in natural populations is key to understanding the origins of biodiversity. The mosaic of mimetic wing patterns in Heliconius butterflies makes an excellent system for exploring adaptive variation using next-generation sequencing. In this study, we use a combination of techniques to annotate the genomic interval modulating red color pattern variation, identify a narrow region responsible for adaptive divergence and convergence in Heliconius wing color patterns, and explore the evolutionary history of these adaptive alleles. We use whole genome resequencing from four hybrid zones between divergent color pattern races of Heliconius erato and two hybrid zones of the co-mimic Heliconius melpomene to examine genetic variation across 2.2 Mb of a partial reference sequence. In the intergenic region near optix, the gene previously shown to be responsible for the complex red pattern variation in Heliconius, population genetic analyses identify a shared 65-kb region of divergence that includes several sites perfectly associated with phenotype within each species. This region likely contains multiple cis-regulatory elements that control discrete expression domains of optix. The parallel signatures of genetic differentiation in H. erato and H. melpomene support a shared genetic architecture between the two distantly related co-mimics; however, phylogenetic analysis suggests mimetic patterns in each species evolved independently. Using a combination of next-generation sequencing analyses, we have refined our understanding of the genetic architecture of wing pattern variation in Heliconius and gained important insights into the evolution of novel adaptive phenotypes in natural populations

Progress report no. 7

Statement of responsibility on title-page reads: editor: M.J. Driscoll; contributors: D.C. Aldrich, M.J. Driscoll, O.K. Kadiroglu, S. Keyvan, H.U.R. Khan, D.D. Lanning, R. Morton, J. Pasztor, T.J. Reckart, A.A. Salehi, J.I. Shin, A.T. Supple, D.J. Wargo, and S.S. WuIncludes bibliographical referencesProgress report; September 30, 1976U.S. Atomic Energy Commission contracts: E(11-1) 225

Reactor physics project final report

"September 30, 1970."Statement of responsibility on title-page reads: Editors, M. J. Driscoll, I. Kaplan, D. D. Lanning, N. C. Rasmussen. Contributors: V. K. Agarwala, F. M. Clikeman, M. J. Driscoll, Y. Hukai, L. L. Izzo, I. Kaplan, M. S. Kazimi, D.D. Lanning, T.C. Leung, E.L. McFarland, N.C. Rasmussen, S.S. Seth, G.E. Sullivan, and A.T. SuppleIncludes bibliographical referencesFinal report; January 1, 1968 to September 30, 1970This is the final report in an experimental and theoretical program to develop and apply single- and few-element methods for the determination of reactor lattice parameters. The period covered by the report is January 1, 1968 through September 30, 1970. In addition to summarizing results for the entire contract period, this report also serves as the final annual report; thus, work completed in the period of October 1, 1969 through September 30, 1970 is dealt with in more detail than the earlier work. Methods were developed to measure the heterogeneous parameters 17, [Gamma] [eta] and [Alpha] for single fuel elements immersed in moderator in an exponential tank using foil activation measurements external to the fuel. These methods were applied to clustered fuel rods in D 20 moderator and single fuel rods in H 20 moderator, and the results were extended to and compared with data on complete multi-element lattices reported by other laboratories. Advanced gamma spectrometric methods using Ge(Li) detectors were applied to the analysis of both prompt and fission product decay gammas for the nondestructive analysis of the fuel used in this work. The latter includes both simulated burned fuel containing plutonium and actual burned fuel irradiated to 20,000 MWD/T in the Dresden BWR.U.S. Atomic Energy Commission contract AT (30-1)-394

Progress report no. 4

Statement of responsibility on title-page reads: editors: M.J. Driscoll, D.D. Lanning, I. Kaplan, A.T. Supple ; contributors: A. Alvim, G.J. Brown, J.K. Chan, T.P. Choong, M.J. Driscoll, G. A. Ducat, I.A. Forbes, M.V. Gregory, S.Y. Ho, C.M. Hove, O. K. Kadiroglu, R.J. Kennerley, D.D. Lanning, J.L. Lazewatsky, L. Lederman, A.S. Leveckis, V.A. Miethe, P. A. Scheinert, A.M. Thompson, N.E. Todreas, C.P. Tzanos, and P.J. WoodIncludes bibliographical referencesProgress report; June 30, 1973U.S. Atomic Energy Commission contract: AT(11-1)225

Design and characteristics of the prophylactic intra-operative ventricular arrhythmia ablation in high-risk LVAD candidates (PIVATAL) trial

BACKGROUND: The use of a Left Ventricular Assist Device (LVAD) in patients with advanced heart failure refractory to optimal medical management has progressed steadily over the past two decades. Data have demonstrated reduced LVAD efficacy, worse clinical outcome, and higher mortality for patients who experience significant ventricular tachyarrhythmia (VTA). We hypothesize that a novel prophylactic intra-operative VTA ablation protocol at the time of LVAD implantation may reduce the recurrent VTA and adverse events postimplant. METHODS: We designed a prospective, multicenter, open-label, randomized-controlled clinical trial enrolling 100 patients who are LVAD candidates with a history of VTA in the previous 5 years. Enrolled patients will be randomized in a 1:1 fashion to intra-operative VTA ablation (n = 50) versus conventional medical management (n = 50) with LVAD implant. Arrhythmia outcomes data will be captured by an implantable cardioverter defibrillator (ICD) to monitor VTA events, with a uniform ICD programming protocol. Patients will be followed prospectively over a mean of 18 months (with a minimum of 9 months) after LVAD implantation to evaluate recurrent VTA, adverse events, and procedural outcomes. Secondary endpoints include right heart function/hemodynamics, healthcare utilization, and quality of life. CONCLUSION: The primary aim of this first-ever randomized trial is to assess the efficacy of intra-operative ablation during LVAD surgery in reducing VTA recurrence and improving clinical outcomes for patients with a history of VTA

Progress report no. 3

Statement of responsibility on title-page reads: editors: M.J. Driscoll, D.D. Lanning, I. Kaplan; contributors: S. T. Brewer, G.J. Brown, P. Delaquil, M.J. Driscoll, G.A. Ducat, I.A. Forbes, M. V. Gregory, S.Y. Ho, M.S. Kalra, C.S. Kang, L.T. Kim, D.D. Lanning, J.L. Lazewatsky, T.C. Leung, E.A. Mason, N.R. Ortiz, N.C. Rasmussen, I.C. Rickard, K.D. Roberson, A.T. Supple, A.M. Thompson, and C.P. TzanosIncludes bibliographical referencesProgress report ; June 30, 1972U.S. Atomic Energy Commission contracts: AT(11-1)306

Progress report no. 2

Statement of responsibility on title-page reads: Editors: I.A. Forbes, M.J. Driscoll, N.C. Rasmussen, D.D. Lanning and I. Kaplan; Contributors: S.T. Brewer, G.J. Brown, P.DeLaquil, III, M.J. Driscoll, I.A. Forbes, C.W. Forsberg, E.P. Gyftopoulos, P.L. Hendrick, C.S. Kang, I. Kaplan, J.L. Klucar, D.D. Lanning, T.C. Leung, E.A. Mason, N.R. Ortiz, N.A. Passman, N.C. Rasmussen, I.C. Rickard, V.C. Rogers, G.E. Sullivan, A.T. Supple, and C. P. TzanosIncludes bibliographical referencesProgress report; June 30, 1971U.S. Atomic Energy Commission contract AT(11-1)306

Progress report no. 1

Statement of responsibility on title-page reads: Editors: I.A. Forbes, M.J. Driscoll, D.D. Lanning, I. Kaplan, N.C. Rasmussen; Contributors: S.A. Ali, S.T. Brewer, D.K. Choi, F.M. Clikeman, W.R. Corcoran, M.J. Driscoll, I.A. Forbes, C.W. Forsberg, S.L. Ho, C.S. Kang, I. Kaplan, J.L. Klucar, D.D. Lanning, T.C. Leung, E.L. McFarland P.G. Mertens, N.R. Ortiz, A. Pant, N.A. Passman, N.C. Rasmussen, M.K. Sheaffer, D.A. Shupe, G.E. Sullivan, A.T. Supple, J.W. Synan, C.P. Tzanos, W.J. Westlake"MIT-4105-3."Includes bibliographical referencesProgress report; June 30, 1970U.S. Atomic Energy Commission contracts: AT(30-1)410