Human motion tracking based on complementary Kalman filter

Miniaturized Inertial Measurement Unit (IMU) has been widely used in many motion capturing applications. In order to overcome stability and noise problems of IMU, a lot of efforts have been made to develop appropriate data fusion method to obtain reliable orientation estimation from IMU data. This article presents a method which models the errors of orientation, gyroscope bias and magnetic disturbance, and compensate the errors of state variables with complementary Kalman filter in a body motion capture system. Experimental results have shown that the proposed method significantly reduces the accumulative orientation estimation errors

Molecular Valves for Controlling Gas Phase Transport Made from Discrete Angstrom-Sized Pores in Graphene

An ability to precisely regulate the quantity and location of molecular flux is of value in applications such as nanoscale 3D printing, catalysis, and sensor design. Barrier materials containing pores with molecular dimensions have previously been used to manipulate molecular compositions in the gas phase, but have so far been unable to offer controlled gas transport through individual pores. Here, we show that gas flux through discrete angstrom-sized pores in monolayer graphene can be detected and then controlled using nanometer-sized gold clusters, which are formed on the surface of the graphene and can migrate and partially block a pore. In samples without gold clusters, we observe stochastic switching of the magnitude of the gas permeance, which we attribute to molecular rearrangements of the pore. Our molecular valves could be used, for example, to develop unique approaches to molecular synthesis that are based on the controllable switching of a molecular gas flux, reminiscent of ion channels in biological cell membranes and solid state nanopores.Comment: to appear in Nature Nanotechnolog

Characteristics comparison of optimal L-band Er-doped ASE sources in different configurations

In this paper, we investigate the 1480nm pumped L-band erbium doped fiber amplified spontaneous emission source of three major configurations: one-stage double-pass forward pump configuration, two-stage with C-band ASE injection configuration, one-stage double-pass bi-directional pump configuration. The characteristics are compared in terms of the output power, pumping conversion efficiency, bandwidth, and mean wavelength stability. It is shown that the one-stage double-pass bi-directional pump configuration has a better performance than the other two configurations

Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

The decay channel $\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p})$ is studied using a sample of $1.06\times 10^8$ $\psi^\prime$ events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the $p\bar{p}$ invariant mass spectrum. The enhancement can be fit with an $S$-wave Breit-Wigner resonance function with a resulting peak mass of $M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2$ and a narrow width that is $\Gamma<38 {\rm MeV/}c^2$ at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

Cascaded logic gates in nanophotonic plasmon networks

Optical computing has been pursued for decades as a potential strategy for advancing beyond the fundamental performance limitations of semiconductor-based electronic devices, but feasible on-chip integrated logic units and cascade devices have not been reported. Here we demonstrate that a plasmonic binary NOR gate, a 'universal logic gate', can be realized through cascaded OR and NOT gates in four-terminal plasmonic nanowire networks. This finding provides a path for the development of novel nanophotonic on-chip processor architectures for future optical computing technologies

Thermopower of the Correlated Narrow Gap Semiconductor FeSi and Comparison to RuSi

Iron based narrow gap semiconductors such as FeSi, FeSb2, or FeGa3 have received a lot of attention because they exhibit a large thermopower, as well as striking similarities to heavy fermion Kondo insulators. Many proposals have been advanced, however, lacking quantitative methodologies applied to this problem, a consensus remained elusive to date. Here, we employ realistic many-body calculations to elucidate the impact of electronic correlation effects on FeSi. Our methodology accounts for all substantial anomalies observed in FeSi: the metallization, the lack of conservation of spectral weight in optical spectroscopy, and the Curie susceptibility. In particular we find a very good agreement for the anomalous thermoelectric power. Validated by this congruence with experiment, we further discuss a new physical picture of the microscopic nature of the insulator-to-metal crossover. Indeed, we find the suppression of the Seebeck coefficient to be driven by correlation induced incoherence. Finally, we compare FeSi to its iso-structural and iso-electronic homologue RuSi, and predict that partially substituted Fe(1-x)Ru(x)Si will exhibit an increased thermopower at intermediate temperatures.Comment: 14 pages. Proceedings of the Hvar 2011 Workshop on 'New materials for thermoelectric applications: theory and experiment

Fabricating subwavelength fiber tapers using a CO2 laser

A fabricating system of fiber tapers using a CO2 laser as its heat source has been developed. According to the self-regulating effect of the CO2 laser in the process of melt-drawn fiber, the relation between the required CO2 laser power and the moving distance of the motorized stage in the fabrication process of fiber taper is found. The dependence of the required laser power and the moving distance of one motorized stage running is of approximately linear increment, which largely simplifies the computer control. With the relation plus regulating the other parameters, a 1.3 mum diameter fiber taper is fabricated. The tapers fabricated by our system have good shape and size for optical device applications

A Two-Step Hydrothermal Synthesis Approach to Monodispersed Colloidal Carbon Spheres

This work reports a newly developed two-step hydrothermal method for the synthesis of monodispersed colloidal carbon spheres (CCS) under mild conditions. Using this approach, monodispersed CCS with diameters ranging from 160 to 400 nm were synthesized with a standard deviation around 8%. The monomer concentration ranging from 0.1 to 0.4 M is in favor of generation of narrower size distribution of CCS. The particle characteristics (e.g., shape, size, and distribution) and chemical stability were then characterized by using various techniques, including scanning electron microscopy (SEM), FT-IR spectrum analysis, and thermalgravity analysis (TGA). The possible nucleation and growth mechanism of colloidal carbon spheres were also discussed. The findings would be useful for the synthesis of more monodispersed nanoparticles and for the functional assembly

Heterostructured electrode with concentration gradient shell for highly efficient oxygen reduction at low temperature

Heterostructures of oxides have been widely investigated in optical, catalytic and electrochemical applications, because the heterostructured interfaces exhibit pronouncedly different transport, charge, and reactivity characteristics compared to the bulk of the oxides. Here we fabricated a three-dimensional (3D) heterostructured electrode with a concentration gradient shell. The concentration gradient shell with the composition of Ba0.5-xSr0.5-yCo0.8Fe0.2O3-δ (BSCF-D) was prepared by simply treating porous Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) backbone with microwave-plasma. Electrochemical impedance spectroscopy reveals that the oxygen surface exchange rate of the BSCF-D is enhanced by ~250% that of the pristine BSCF due to the appearance of the shell. The heterostructured electrode shows an interfacial resistance as low as 0.148 Ω cm2 at 550°C and an unchanged electrochemical performance after heating treatment for 200 h. This method offers potential to prepare heterostructured oxides not only for electrochemical devices but also for many other applications that use ceramic materials