An Efficient Algorithm for Steady State Analysis of Fibre Lasers Operating under Cascade Pumping Scheme

We derive an efficient algorithm for the steady state analysis of fibre lasers operating under cascade pumping scheme by combining the shooting method with the Newton-Raphson method. We compare the proposed algorithm with the two standard algorithms that have been used so far in the available literature: the relaxation method and the coupled solution method. The results obtained show that the proposed shooting method based algorithm achieves much faster convergence rate at the expense of a moderate increase in the calculation time.  It is found that a further improvement in the computational efficiency can be achieved by using few iterations of the relaxation method to calculate the initial guess for the proposed shooting method based algorithm

Simple and efficient method of lines based algorithm for modelling of erbium doped Q-switched fluoride fiber lasers

An improved algorithm based on the method of lines for modelling of Q-switched fluoride glass based erbium doped fiber lasers is presented. The algorithm uses finite difference method to reduce partial differential equations to a set of ordinary differential equations. Unlike the method of characteristics the ratio of the temporal and spatial step is not fixed. Thus computationally efficient algorithms with an adaptive step control for the solution of a set of ordinary differential equations can be directly applied. The performance of the improved algorithm against the standard one is compared. The results obtained show that the improved algorithm is significantly more computationally efficient

Narrow-line coherently combined tapered laser diodes in a Talbot external cavity with a volume Bragg grating

We present the phase locking of an array of index-guided tapered laser diodes. An external cavity based on the self-imaging Talbot effect has been built. A volume Bragg grating is used as the output coupler to stabilize and narrow the spectrum at 976 nm. A power of 1.7 W is achieved in the in-phase single main lobe mode with a high visibility. We have checked that each emitter is locked to the Bragg wavelength with a 100 pm spectrum linewidth. The experimental results compare well with numerical simulations performed with two-dimensional wide-angle finite difference beam propagation method

Modeling propagation in large deformed step-index fibers using a finite operator method

© 2019 Optical Society of America. A finite operator model is applied to the propagation of light in deformed step-index fibers. The distribution of the light captured by the fiber from an arbitrary initial excitation is illustrated in the phase space for each fiber boundary. The method proves to be promising in modeling the transmission of light in the presence of fiber asymmetries. Simulations are made of the captured power in the core in the presence of fiber deformations

Experimental and numerical investigation to rationalize both near-infrared and mid-infrared spontaneous emission in Pr3+ doped selenide-chalcogenide fiber

This contribution reports on detailed experimental and numerical investigations of both near-infrared (NIR) and mid-infrared (MIR) photoluminescence obtained in praseodymium trivalent ion doped chalcogenide-selenide glass fiber. The experimental analysis allows for the identification of the radiative transitions within the praseodymium ion energy level structure to account for the photoluminescent behavior. Numerical analysis is carried out using the rate equations’ approach to calculate the level populations. The numerical analysis provides further insight into the nature of the radiative transitions in the Pr3+ ion doped chalcogenide-selenide glass and allows for the identification of the electronic transitions, which contribute to the observed photoluminescence. The numerical results agree well with the experimental results

Volume Bragg grating external cavities for the passive phase locking of high-brightness diode laser arrays: theoretical and experimental study

We describe the theoretical modeling of the external-cavity operation of a phase-locked array of diode lasers in two configurations, the self-imaging cavity based on the Talbot effect and the angular-filtering cavity. Complex filtering functions, such as the transmission or reflection of a volume Bragg grating (VBG), may be introduced in the external-cavity description. Experiments with high-brightness diode laser arrays were also conducted. The experimental results are carefully analyzed with regard to the numerical simulations, and the beneficial effect of the spectral selectivity of VBGs is demonstrated. (C) 2011 Optical Society of Americ

Experimental photoluminescence and lifetimes at wavelengths including beyond 7 microns in Sm3+-doped selenide-chalcogenide glass fibers

1000 ppmw Sm3+-doped Ge19.4Sb9.7Se67.9Ga3 atomic % chalcogenide bulk glass and unstructured fiber are prepared. Near- and mid-infrared absorption spectra of the bulk glass reveal Sm3+ electronic absorption bands, and extrinsic vibrational absorption bands, due to host impurities. Fiber photoluminescence, centred at 3.75 μm and 7.25 μm, is measured when pumping at either 1300 or 1470 nm. Pumping at 1470 nm enables the photoluminescent lifetime at 7.3 μm to be measured for the first time which was ~100 μm. This is the longest to date, experimentally observed lifetime in the 6.5-9 μm wavelength-range of a lanthanide-doped chalcogenide glass fiber

Experimental investigation of mid-infrared laser action from DY3+ doped fluorozirconate fiber

Efficient continuous-wave laser operation at 2.982 μm is achieved with a Dy3:fluoride fiber pumped using an inhouse-built 1.1 μm ytterbium (III) fiber laser. The laser output power reached is 554 mW, with a maximum slope efficiency of 18% with respect to the launched pump power. Additionally, the measured spontaneous luminescence within the visible wavelength range, under 1.1 μm pumping, is presented and attributed to excited state absorption (ESA). The influence of the ESA on the laser performance is discussed. The results confirm that high output powers from Dy: fluoride fiber laser pumped at 1.1 μm are possible