3,337 research outputs found
On the Solid Lubricity of Electrophoretically Deposited Carbon Nanohorn Coatings
In this study, dahlia-type carbon nanohorns (CNH) have been deposited onto a stainless
steel substrate by using electrophoretic deposition. Secondly, the lubrication properties of the carbon
nanohorn coating have been researched by tribometry and compared to an uncoated reference.
Wear track analysis has been conducted to identify the underlying tribo-mechanisms. Additionally,
Raman spectroscopy was employed to study the structural changes of the CNH during dispersion
and tribological testing. Furthermore, energy dispersive X-ray spectroscopy (EDX) was used in order
to investigate the chemical composition of the wear tracks’ surface. This work has shown that CNH
coatings have the ability to maintain effective solid lubrication on a polished stainless steel surface.
A temporary friction reduction of 83% was achieved compared to the uncoated reference. Moreover,
the lubricity was active for significant periods of time due to the formation of a Mg(OH)2 layer which
provides a certain degree of substrate adhesion as it holds the CNH in the wear track. Once this
holding layer wanes, the CNH are gradually removed from wear track resulting in an increase of the
coefficient of friction. The complete removal of CNH from the wear track as well as considerable
oxide formation was confirmed by EDX. Moreover, the amount of defects in the CNHs’ structure
increases by being exposed to tribological strain. Adhesion has been identified as the dominant
wear mechanism
Carbon Nanomaterials—Promising Solid Lubricants to Tailor Friction and Wear
It is our pleasure to launch this Special Issue related to the application of carbon nanomaterials as solid lubricants to tailor friction and wear [...
Reactions of HNO with Metal Porphyrins: Underscoring the Biological Relevance of HNO
Azanone (1 HNO, nitroxyl) shows interesting yet poorly understood chemical and biological effects. HNO has some overlapping properties with nitric oxide (NO), sharing its biological reactivity toward heme proteins, thiols, and oxygen. Despite this similarity, HNO and NO show significantly different pharmacological effects. The high reactivity of HNO means that studies must rely on the use of donor molecules such as trioxodinitrate (Angeli’s salt). It has been suggested that azanone could be an intermediate in several reactions and that it may be an enzymatically produced signaling molecule. The inherent difficulty in detecting its presence unequivocally prevents evidence from yielding definite answers. On the other hand, metalloporphyrins are widely used as chemical models of heme proteins, providing us with invaluable tools for the study of the coordination chemistry of small molecules, like NO, CO, and O2. Studies with transition metal porphyrins have shown diverse mechanistic, kinetic, structural, and reactive aspects related to the formation of nitrosyl complexes. Porphyrins are also widely used in technical applications, especially when coupled to a surface, where they can be used as electrochemical gas sensors. Given their versatility, they have not escaped their role as key players in chemical studies involving HNO. This Account presents the research performed during the last 10 years in our group concerning azanone reactions with iron, manganese, and cobalt porphyrins. We begin by describing their HNO trapping capabilities, which result in formation of the corresponding nitrosyl complexes. Kinetic and mechanistic studies of these reactions show two alternative operating mechanisms: reaction of the metal center with HNO or with the donor. Moreover, we have also shown that azanone can be stabilized by coordination to iron porphyrins using electron-attracting substituents attached to the porphyrin ring, which balance the negatively charged NO¯. Second, we describe an electrochemical HNO sensing device based on the covalent attachment of a cobalt porphyrin to gold. A surface effect affects the redox potentials and allows discrimination between HNO and NO. The reaction with the former is fast, efficient, and selective, lacking spurious signals due to the presence of reactive nitrogen and oxygen species. The sensor is both biologically compatible and highly sensitive (nanomolar). This time-resolved detection allows kinetic analysis of reactions producing HNO. The sensor thus offers excellent opportunities to be used in experiments looking for HNO. As examples, we present studies concerning (a) HNO donation capabilities of new HNO donors as assessed by the sensor, (b) HNO detection as an intermediate in O atom abstraction to nitrite by phosphines, and (c) NO to HNO interconversion mediated by alcohols and thiols. Finally, we briefly discuss the key experiments required to demonstrate endogenous HNO formation to be done in the near future, involving the in vivo use of the HNO sensing device.Fil: Doctorovich, Fabio. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Bikiel, Damian Ezequiel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Pellegrino, Juan. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Suarez, Sebastian. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Marti, Marcelo Adrian. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentin
Wear Reduction via CNT Coatings in Electrical Contacts Subjected to Fretting
Carbon nanotubes (CNT) are of great interest to the research community due to their outstanding mechanical, transport,
and optical properties. These nanoparticles have also shown exceptional lubricating capabilities, which coupled with their
electrical conductivity show promising results as solid lubricants in electrical contacts. In this study, three diferent CNT
coatings were deposited over copper platelets via electrophoretic deposition and subsequently tribo-electrically characterized
including electrical contact resistance evolution during fretting wear, wear protection, chemical analysis of fretting marks,
as well as infuence of CNT coating thickness, duration and normal load applied during fretting, and atmospheric humidity.
Thicker CNT coatings show improved wear protection while retaining similar electrical behavior as uncoated copper, or
even improving its electrical contact resistance. Moreover, the compaction of the porous CNT coating is crucial for optimal
electrical performance at low humidity. For longer fretting tests (150,000 and 500,000 cycles), the coatings are displaced
thus afecting the wear protection ofered. However, the coatings stabilize and reduce ECR compared to uncoated samples.
Furthermore, thicker CNT coatings can bear higher loads during fretting due to the increased lubricant reservoir, with carbonaceous triboflm remaining at the contacting interface after 5,000 fretting cycles regardless of normal load
Electrical Characterization of Carbon Nanotube Reinforced Silver and Copper Composites for Switching Contacts
Carbon nanotube (CNT)-reinforced silver and copper metal matrix composites—at three
different reinforcement phase concentrations (0.5 wt.%, 0.75 wt.%, and 1 wt.%)—were produced via
powder metallurgy and sintered via hot uniaxial pressing. Optical and electron microscopy techniques
were used to characterize the powder mixtures and sintered composites. The latter were also
electrically characterized via load-dependent electrical contact resistance (ECR) and surface fatigue
tests. Particle size and morphology play a crucial role in CNT deposition onto the metallic powder.
CNT were deposited exceptionally well onto the dendritic copper powder regardless of its larger size
(compared with the silver flakes) due to the higher surface area caused by the grooves and edges
of the dendritic structures. The addition of CNT to the metallic matrices improved their electrical
performance, in general outperforming the reference material. Higher CNT concentrations produced
consistently low ECR values. In addition, high CNT concentrations (i.e., 1 wt.%) show exceptional
contact repeatability due to the elastic restitutive properties of the CNT. The reproducibility of
the contact surface was further evaluated by the fatigue tests, where the composites also showed
lower ECR than the reference material, rapidly reaching steady-state ECR within the 20 fatigue
cycles analyzed
Multipurpose setup used to characterize tribo-electrical properties of electrical contact materials
Electrical contacts are pervasively found on countless modern devices and systems. It is imperative that connecting components present adequate electrical, mechanical, and chemical characteristics to fulfill the crucial role that they play in the system. To develop an electrical contact material that is tailored for a specific application, different approaches are pursued (e.g., coatings, reinforced composites, alloyed metals, duplex systems, etc.). The manufacturing of electrical contact materials demand a thorough characterization of their electrical properties, mechanical properties, and their resistance to wear, as well as their resistance to atmospheric conditions. Accordingly, commissioning of a novel setup enables a more comprehensive study of the materials that are developed. Therefore, a complete understanding of the material's electrical and tribological characteristics are attained, allowing the production of a material that is compliant with the particular demands of the application for which it is intended. This multipurpose setup was built with higher precision stages and higher accuracy 3-axis force sensor, thus providing the following improvement over the preceding setup:
•
Elevated load-bearing capacity (double), higher precision and stability.
•
Tribo-electrical characterization (implementation of scratch and fretting tests).
•
Environmental control (climate and external vibration)
Modelación matemática para el análisis térmico de fenómenos por medio de dominios semi-infinitos
A mathematical analysis of the equation of heat is presented, in search of its conclusion; the understanding of the variables and parameters which interact in this, and the characterization of each. Finally, the solution and simulation are found taking into account the physical and mathematical meaning, framed in the analysis of two semi-infinite and close domains.Se presenta un análisis matemático de la ecuación de calor, en la búsqueda de su deducción; la comprensión de las variables y parámetros que interactúan en ésta y la caracterización de cada uno de ellos. Finalmente, se encuentra su solución y simulación, teniendo en cuenta el significado físico y matemático, enmarcado en el análisis de los dominios semi-infinitos y cerrados
Modelación matemática para el análisis térmico de fenómenos por medio de dominios semi-infinitos
A mathematical analysis of the equation of heat is presented, in search of its conclusion; the understanding of the variables and parameters which interact in this, and the characterization of each. Finally, the solution and simulation are found taking into account the physical and mathematical meaning, framed in the analysis of two semi-infinite and close domains.Se presenta un análisis matemático de la ecuación de calor, en la búsqueda de su deducción; la comprensión de las variables y parámetros que interactúan en ésta y la caracterización de cada uno de ellos. Finalmente, se encuentra su solución y simulación, teniendo en cuenta el significado físico y matemático, enmarcado en el análisis de los dominios semi-infinitos y cerrados
- …