Carbon nanotubes (CNT) are of great interest to the research community due to their outstanding mechanical, transport,
and optical properties. These nanoparticles have also shown exceptional lubricating capabilities, which coupled with their
electrical conductivity show promising results as solid lubricants in electrical contacts. In this study, three diferent CNT
coatings were deposited over copper platelets via electrophoretic deposition and subsequently tribo-electrically characterized
including electrical contact resistance evolution during fretting wear, wear protection, chemical analysis of fretting marks,
as well as infuence of CNT coating thickness, duration and normal load applied during fretting, and atmospheric humidity.
Thicker CNT coatings show improved wear protection while retaining similar electrical behavior as uncoated copper, or
even improving its electrical contact resistance. Moreover, the compaction of the porous CNT coating is crucial for optimal
electrical performance at low humidity. For longer fretting tests (150,000 and 500,000 cycles), the coatings are displaced
thus afecting the wear protection ofered. However, the coatings stabilize and reduce ECR compared to uncoated samples.
Furthermore, thicker CNT coatings can bear higher loads during fretting due to the increased lubricant reservoir, with carbonaceous triboflm remaining at the contacting interface after 5,000 fretting cycles regardless of normal load
