172 research outputs found

    Chemigation with Micronized Sulfur Rapidly Reduces Soil pH in a New Planting of Northern Highbush Blueberry

    Get PDF
    Northern highbush blueberry (Vaccinium corymbosum L.) is adapted to acidic soil conditions and often grows poorly when soil pH is greater than 5.5. When soil pH is high, growers will usually mix prilled elemental sulfur (So) into the soil before planting (converted to sulfuric acid by soil bacteria) and, if needed, inject acid into the irrigation water after planting. These practices are effective but often expensive, time consuming, and, in the case of acid, potentially hazardous. Here, we examined the potential of applying micronized So by chemigation through a drip system as an alternative to reduce soil pH in a new planting of ‘Duke’ blueberry. The planting was located in western Oregon and established on raised beds mulched with sawdust in Oct. 2010. The So product was mixed with water and injected weekly for a period of ≈2 months before planting and again for period of ≈2 months in late summer of the second year after planting (to assess its value for reducing soil pH once the field was established), at a total rate of 0, 50, 100, and 150 kg·ha−1 So on both occasions. Each treatment was compared with the conventional practice of incorporating prilled So into the soil before planting (two applications of 750 kg·ha−1 So each in July and Oct. 2010). Within a month of the first application of So, chemigation reduced soil pH (0–10 cm depth) from an average of 6.6 with no So to 6.1 with 50 kg·ha−1 So and 5.8 with 100 or 150 kg·ha−1 So. However, the reductions in pH were short term, and by May of the following year (2011), soil pH averaged 6.7, 6.5, 6.2, and 6.1 with each increasing rate of So chemigation, respectively. Soil pH in the conventional treatment, in comparison, averaged 6.6 a month after the first application and 6.3 by the following May. In July 2012, soil pH ranged from an average of 6.4 with no So to 6.2 with 150 kg·ha−1 So and 5.5 with prilled So. Soil pH declined to as low as 5.9 following postplanting So chemigation and, at lower depths (10–30 cm), was similar between the treatment chemigated with 150 kg·ha−1 So and the conventional treatment. None of the treatments had any effect on winter pruning weight in year 1 or on yield, berry weight, or total dry weight of the plants in year 2. Concentration of P, K, Ca, Mg, S, and Mn in the leaves, on the other hand, was lower with So chemigation than with prilled So during the first year after planting, whereas concentration of N, P, and S in the leaves were lower with So chemigation during the second year. The findings indicate that So chemigation can be used to quickly reduce soil pH after planting and therefore may be a useful practice to correct high pH problems in established northern highbush blueberry fields; however, it was less effective and more time consuming than applying prilled So before plantin

    Assessment of the microbial community in the cathode compartment of a plant microbial fuel cell

    Get PDF
    Introduction: In plant microbial fuel cells (plant-MFCs) living plants and microorganisms form an electrochemical unit able to produce clean and sustainable electricity from solar energy. It is reasonable to assume that besides the bacteria in the anode compartment also the cathode compartment plays a crucial role for a stable high current producing plant-MFC. In this study we aim to identify dominant bacterial species in the cathode compartment of the plant-MFC

    Proceedings 2nd International PlantPower Symposium 2012

    Get PDF
    Our world is confronted with an energy crisis on a global scale. Our current energy supplies are polluting our environment and are not based on endless cycles. Clean technologies are needed that provide people and planet with safe, affordable and secure energy. PlantPower is a new additional source of electricity. It was in 1911 when the British botanist Michael C. Potter showed that bacteria can cause electrical effects accompanied by decomposition of organic matter. Nowadays, 101 years later, this electrical effect evolved into the development of a multitude of bio-electrochemical systems providing all kinds of services like wastewater treatment, electricity generation or chemical recovery. The Plant Microbial Fuel Cell (Plant-MFC) offers in-situ electricity production with living plants and bacteria. This unique combination was just invented 6 years ago and is already scaled-up to 25 square meters. The last 4 years a multidisciplinary research team explored the Plant-MFC in an EU research project. Exciting discoveries and great technological development took place over the last few years. New research questions came up and opportunities were identified to improve the system in the future. By bringing scientists, companies and entrepreneurs together we expect to bring PlantPower from the lab into the real world. The Plant-MFC is promising from a technical, environmental and economic perspective. The design criteria for the future are defined; but still development on several issues is needed. Besides the fundamental research, scaling-up the technology is the next challenge. Especially wetlands offer the opportunity to produce electricity on a large scale. World-wide 800,000,000 ha wetland are present, however they are often under pressure due to our need of arable land for food, feed or chemicals. Here the Plant-MFC can be a solution since Plant-MFCs can be combined with nature and in that sense make nature preservation economically feasible. This 2nd international PlantPower symposium will show exiting results of the EU PlantPower consortium and other researchers

    Microbial solar cells: applying photosynthetic and electrochemically active organisms

    Get PDF
    Microbial solar cells (MSCs) are recently developed technologies utilizing solar energy to produce electricity or chemicals. MSCs use photoautotrophic microorganisms or higher plants to harvest solar energy, and use electrochemically active microorganisms in the bioelectrochemical system to generate electrical current. Here, we review the principles and performance of various MSCs, in an effort to identify the most promising systems as well as the bottlenecks and potential solutions towards „real life. MSC application. We give an outlook on future applications based on the intrinsic advantages of MSCs, showcasing specifically how these living energy systems can facilitate the development of an electricity-producing green roof.This is a "Post-Print" accepted manuscript, which has been published in "Trends in Biotechnology". This version is distributed under the Creative Commons Attribution 3.0 Netherlands License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Please cite this publication as follows: 2011 Trends in Biotechnology Microbial solar cells: applying photosynthetic and electrochemically active organisms. David P.B.T.B. Strik, Ruud A. Timmers, Marjolein Helder, Kirsten J.J. Steinbusch, Hubertus V.M. Hamelers, , Cees J.N. Buisman. Trends in Biotechnology 29 (1), 41-49 You can download the published version at: http://dx.doi.org/10.1016/j.tibtech.2010.10.00

    A thin layer of activated carbon deposited on polyurethane cube leads to new conductive bioanode for (plant) microbial fuel cell

    Get PDF
    Large-scale implementation of (plant) microbial fuel cells is greatly limited by high electrode costs. In this work, the potential of exploiting electrochemically active self-assembled biofilms in fabricating three-dimensional bioelectrodes for (plant) microbial fuel cells with minimum use of electrode materials was studied. Three-dimensional robust bioanodes were successfully developed with inexpensive polyurethane foams (PU) and activated carbon (AC). The PU/AC electrode bases were fabricated via a water-based sorption of AC particles on the surface of the PU cubes. The electrical current was enhanced by growth of bacteria on the PU/AC bioanode while sole current collectors produced minor current. Growth and electrochemical activity of the biofilm were shown with SEM imaging and DNA sequencing of the microbial community. The electric conductivity of the PU/AC electrode enhanced over time during bioanode development. The maximum current and power density of an acetate fed MFC reached 3 mA·m−2 projected surface area of anode compartment and 22 mW·m−3 anode compartment. The field test of the Plant-MFC reached a maximum performance of 0.9 mW·m−2 plant growth area (PGA) at a current density of 5.6 mA·m−2 PGA. A paddy field test showed that the PU/AC electrode was suitable as an anode material in combination with a graphite felt cathode. Finally, this study offers insights on the role of electrochemically active biofilms as natural enhancers of the conductivity of electrodes and as transformers of inert low-cost electrode materials into living electron acceptors.</p
    corecore