Development of heat flux sensors in turbine airfoils

The objective is to develop heat flux sensors suitable for use on turbine airfoils and to verify the operation of the heat flux measurement techniques through laboratory experiments. The requirements for a program to investigate the measurement of heat flux on airfoils in areas of strong non-one-dimensional flow were also identified

Development of advanced high-temperature heat flux sensors

Various configurations of high temperature, heat flux sensors were studied to determine their suitability for use in experimental combustor liners of advanced aircraft gas turbine engines. It was determined that embedded thermocouple sensors, laminated sensors, and Gardon gauge sensors, were the most viable candidates. Sensors of all three types were fabricated, calibrated, and endurance tested. All three types of sensors met the fabricability survivability, and accuracy requirements established for their application

Nuclear magnetic resonance cryoporometry

Nuclear Magnetic Resonance (NMR) cryoporometry is a technique for non-destructively determining pore size distributions in porous media through the observation of the depressed melting point of a confined liquid. It is suitable for measuring pore diameters in the range 2 nm-1 mu m, depending on the absorbate. Whilst NMR cryoporometry is a perturbative measurement, the results are independent of spin interactions at the pore surface and so can offer direct measurements of pore volume as a function of pore diameter. Pore size distributions obtained with NMR cryoporometry have been shown to compare favourably with those from other methods such as gas adsorption, DSC thermoporosimetry, and SANS. The applications of NMR cryoporometry include studies of silica gels, bones, cements, rocks and many other porous materials. It is also possible to adapt the basic experiment to provide structural resolution in spatially-dependent pore size distributions, or behavioural information about the confined liquid

Letter, from W. E. Strange, Chair of the Mississippi College Department of Mathematics, to Mississippi State University President Dean W. Colvard, March 4, 1963

In this letter, W.E. Strange, Chair of Mathematice Department at Mississippi College, write to Mississippi State University President Dean W. Colvard, to express his opposition to MSU playing Loyola Chicago, a team with Black players, in the NCAA tournament.https://scholarsjunction.msstate.edu/ua-msu-loyola-1963/1027/thumbnail.jp

Advanced high temperature heat flux sensors

To fully characterize advanced high temperature heat flux sensors, calibration and testing is required at full engine temperature. This required the development of unique high temperature heat flux test facilities. These facilities were developed, are in place, and are being used for advanced heat flux sensor development

Characterisation of porous solids using small-angle scattering and NMR cryoporometry

The characteristics of several porous systems have been studied by the use of small-angle neutron scattering [SANS] and nuclear magnetic resonance [NMR] techniques. The measurements reveal different characteristics for sol-gel silicas, activated carbons and ordered mesoporous silicas of the MCM and SBA type. Good agreement is obtained between gas adsorption measurements and the NMR and SANS results for pore sizes above 10 nm. Recent measurements of the water/ice phase transformation in SBA silicas by neutron diffraction are also presented and indicate a complex relationship that will require more detailed treatment in terms of the possible effects of microporosity in the silica substrate. The complementarity of the different methods is emphasised and there is brief discussion of issues related to possible future developments

Turbine blade and vane heat flux sensor development, phase 2

The development of heat flux sensors for gas turbine blades and vanes and the demonstration of heat transfer measurement methods are reported. The performance of the heat flux sensors was evaluated in a cylinder in cross flow experiment and compared with two other heat flux measurement methods, the slug calorimeter and a dynamic method based on fluctuating gas and surface temperature. Two cylinders, each instrumented with an embedded thermocouple sensor, a Gardon gauge, and a slug calorimeter, were fabricated. Each sensor type was calibrated using a quartz lamp bank facility. The instrumented cylinders were then tested in an atmospheric pressure combustor rig at conditions up to gas stream temperatures of 1700K and velocities to Mach 0.74. The test data are compared to other measurements and analytical prediction

Phonetic complexity affects children’s Mandarin tone production accuracy in disyllabic words: A perceptual study

This is the first study to examine the effect of phonetic contexts on children’s lexical tone production. Mandarin tones in disyllabic words produced by forty-four 2- to 6-year-old children and twelve mothers were low-pass filtered to eliminate lexical information. Native Mandarin-speaking adults categorized the tones based on the pitch information in the filtered stimuli. All mothers’ tones were categorized with ceiling accuracy. Counter to the findings in most previous studies on children’s tone acquisition and the prevailing assumption in models of speech development that children acquire suprasegmental features much earlier than segmental features, this study found that children as old as six years of age have not mastered the production of Mandarin tones. Children’s tones were judged with significantly lower accuracy than mothers’ productions. Tone accuracy improved, while cross subject variability in tone accuracy decreased, with age. Children’s tone accuracy was affected by the articulatory complexity of phonetic contexts. Children made more errors in tone combinations with more complex fundamental frequency (F0) contours than tone sequences with simpler F0 changes. When producing disyllabic tone sequences with complex F0 contours, children tended to shift the F0 contour of the first tone to reduce the F0 change, resulting in more tone errors in the first syllable than in the second syllable and showing substantially more anticipatory coarticulation than adults. The results provide further evidence that acquisition of lexical tones is a protracted process in children. Tones produced accurately by children in one phonetic context may not be produced correctly in another phonetic context. Children demonstrate more anticipatory coarticulation in their disyllabic productions than adults, which may be attributed to children’s immature speech motor control in tone production, and is presumably a by-product of their inability to accomplish complex F0 changes within the syllable time-frame.published_or_final_versio

Development of advanced high-temperature heat flux sensors. Phase 2: Verification testing

A two-phase program is conducted to develop heat flux sensors capable of making heat flux measurements throughout the hot section of gas turbine engines. In Phase 1, three types of heat flux sensors are selected; embedded thermocouple, laminated, and Gardon gauge sensors. A demonstration of the ability of these sensors to operate in an actual engine environment is reported. A segmented liner of each of two combustors being used in the Broad Specification Fuels Combustor program is instrumented with the three types of heat flux sensors then tested in a high pressure combustor rig. Radiometer probes are also used to measure the radiant heat loads to more fully characterize the combustor environment. Test results show the heat flux sensors to be in good agreement with radiometer probes and the predicted data trends. In general, heat flux sensors have strong potential for use in combustor development programs

A comparison and evaluation of satellite derived positions of tracking stations

A comparison is presented of sets of satellite tracking station coordinate values published in the past few years by a number of investigators, i.e. Goddard Space Flight Center, Smithsonian Astrophysical Observatory, Ohio State University, The Naval Weapons Laboratory, Air Force Cambridge Research Laboratories, and Wallops Island. The comparisons have been made in terms of latitude, longitude and height. The results of the various solutions have been compared directly and also with external standards such as local survey data and gravimetrically derived geoid heights. After taking into account systematic rotations, latitude and longitude agreement on a global basis is generally 15 meters or better, on the North American Datum agreement is generally better than 10 meters. Allowing for scale differences (of the order of 2 ppm) radial agreement is generally of the order of 10 meters