130 research outputs found
Best Mode: A Plea to Repair or Sacrifice this Broken Requirement of United States Patent Law
An inventor\u27s obligation to disclose the best mode of her invention is strong consideration in the U.S. patent bargain, but the courts paradoxically define the scope of that obligation, thus rendering the enforcement of U.S. patents unreasonably unpredictable. If an inventor cannot reasonably foresee the scope of her obligation to disclose invention details, then she is subjected to the costs and risks of either overcompliance or undercompliance with the best mode requirement. The scope of the best mode requirement should either be reliably defined by an en banc ruling of the Court of Appeals for the Federal Circuit, or the requirement should be discarded entirely by legislative action, preferably as a sacrificial bargaining chip during future international patent law harmonization efforts. Until then, however, an inventor should overcomply with the best mode requirement to avoid having her patent claims invalidated, or worse. In light of the disservice that the best mode requirement currently does to patent law, this article advocates a drastic legal change, either to stabilize the scope of the best mode requirement and thus render it fit for the purpose it was intended to serve, or to discard the requirement altogether. In addition, this article provides guidance for inventors in complying with the unpredictable best mode requirement. Section II of this article traces the evolution of the best mode requirement. Section III extracts a plain language definition of best mode from the current statutory and regulatory provisions. Then, the different standards of law regarding the scope of invention disclosure are chronologically culled from the case law in Section IV. Sections V and VI set forth a set of conclusions and recommendations, and, finally, Section VII provides a summary of the key points of this article. The Appendix provides aids for visualizing the author\u27s suggested definition and scope of the best mode requirement
Continuous-Variable Quantum Computing in Optical Time-Frequency Modes using Quantum Memories
We develop a scheme for time-frequency encoded continuous-variable
cluster-state quantum computing using quantum memories. In particular, we
propose a method to produce, manipulate and measure 2D cluster states in a
single spatial mode by exploiting the intrinsic time-frequency selectivity of
Raman quantum memories. Time-frequency encoding enables the scheme to be
extremely compact, requiring a number of memories that is a linear function of
only the number of different frequencies in which the computational state is
encoded, independent of its temporal duration. We therefore show that quantum
memories can be a powerful component for scalable photonic quantum information
processing architectures.Comment: 5 pages, 6 figures, and supplementary information. Updated to be
consistent with published versio
An Optimal Design for Universal Multiport Interferometers
Universal multiport interferometers, which can be programmed to implement any
linear transformation between multiple channels, are emerging as a powerful
tool for both classical and quantum photonics. These interferometers are
typically composed of a regular mesh of beam splitters and phase shifters,
allowing for straightforward fabrication using integrated photonic
architectures and ready scalability. The current, standard design for universal
multiport interferometers is based on work by Reck et al (Phys. Rev. Lett. 73,
58, 1994). We demonstrate a new design for universal multiport interferometers
based on an alternative arrangement of beam splitters and phase shifters, which
outperforms that by Reck et al. Our design occupies half the physical footprint
of the Reck design and is significantly more robust to optical losses.Comment: 8 pages, 4 figure
An investigation into the antidiabetic and catalytic properties of oxovanadium(IV) complexes
In part 1 of this thesis, the antidiabetic activity of a series of novel oxovanadium(IV) complexes was investigated. A range of bidentate N,O-donor ligands, which partially mimic naturally occurring bioligands, were prepared and reacted with the vanadyl ion to form the corresponding bis-coordinated complexes. Initially, 2-(2Ë-hydroxyphenyl)-1R-imidazoline (where R = H, ethyl and ethanol) ligands were prepared. The aqueous pH-metric chemical speciation was investigated using glass electrode potentiometry which allowed for the determination of protonation and stability constants of the ligands and complexes, respectively. The species distribution diagrams generated from this information gave an indication of how the complexes might behave across the broad pH range experienced in the digestive and circulatory systems. This information was used to create an improved 2nd generation of ligands that were constructed by combining the imidazole and carboxylic acid functionalities. These corresponding bis[(imidazolyl)carboxylato]-oxovanadium(IV) complexes displayed a broader pH-metric stability. Both sets of complexes improved glucose uptake and reduced coagulation in vitro. In part 2 of this thesis, a range of homogeneous and heterogeneous oxovanadium(IV) catalysts were prepared. Firstly, Merrifield beads were functionalized with ligands from Part 1 and then reacted with vanadyl sulfate to afford the corresponding heterogeneous catalysts. These displayed promising catalytic activity for the peroxide facilitated oxidation of thioanisole, styrene and ethylbenzene as well as the oxidative bromination of phenol red. Smaller imidazole-containing beads with higher surface areas than the Merrifield beads were prepared by suspension polymerization. These beads similarly demonstrated excellent catalytic activity for the oxidation of thioanisole and were highly recyclable. In attempt to increase the exposed catalytic surface area, while retaining the ease of separation achieved in the before mentioned systems, micron to nano sized electrospun fibers containing coordinating ligands were fabricated. The corresponding oxovanadium(IV) functionalized fibers were applied to the oxidation of thioanisole using a continuous flow system. The flexible and porous nature of the fiber mats was well suited to this approach. After optimization of the reactant flow rate and catalyst amount, near quantitative (> 99%) oxidation was achieved for an extended period. In addition, leaching of vanadium was mitigated by modification of the attached ligand or polymer material
Gaussian Optical Ising Machines
It has recently been shown that optical parametric oscillator (OPO) Ising
machines, consisting of coupled optical pulses circulating in a cavity with
parametric gain, can be used to probabilistically find low-energy states of
Ising spin systems. In this work, we study optical Ising machines that operate
under simplified Gaussian dynamics. We show that these dynamics are sufficient
for reaching probabilities of success comparable to previous work. Based on
this result, we propose modified optical Ising machines with simpler designs
that do not use parametric gain yet achieve similar performance, thus
suggesting a route to building much larger systems.Comment: 6 page
The rheumatoid foot: a systematic literature review of patient-reported outcome measures
<p>Abstract</p> <p>Background</p> <p>The foot is often the first area of the body to be systematically affected by rheumatoid arthritis. The multidimensional consequences of foot problems for patients can be subjectively evaluated using patient-reported outcome measures (PROMs). However, there is currently no systematic review which has focused specifically upon the PROMs available for the foot with rheumatoid arthritis. The aim of this systematic review was to appraise the foot-specific PROMs available for the assessment and/or evaluation of the foot affected with rheumatoid arthritis.</p> <p>Methods</p> <p>A systematic search of databases was conducted according to pre-defined inclusion/exclusion criteria. PROMs identified were reviewed in terms of: conceptual bases, quality of construction, measurement aims and evidence to support their measurement properties.</p> <p>Results</p> <p>A total of 11 PROMs were identified and 5 papers that provided evidence for the measurement properties of some of the PROMs. Only one of the PROMs was found to be RA disease-specific. The quality of construction, pretesting and presence of evidence for their measurement properties was found to be highly variable. Conceptual bases of many of the PROMs was either restricted or based on reductionist biomedical models. All of the PROMs were found to consist of fixed scales.</p> <p>Conclusions</p> <p>There is a need to develop an RA-disease and foot-specific PROM with a greater emphasis on a biopsychosocial conceptual basis, cognitive pre-testing methods, patient preference-based qualities and evidence to support the full complement of measurement properties.</p
Tensor network states in time-bin quantum optics
The current shift in the quantum optics community towards large-size
experiments -- with many modes and photons -- necessitates new classical
simulation techniques that go beyond the usual phase space formulation of
quantum mechanics. To address this pressing demand we formulate linear quantum
optics in the language of tensor network states. As a toy model, we extensively
analyze the quantum and classical correlations of time-bin interference in a
single fiber loop. We then generalize our results to more complex time-bin
quantum setups and identify different classes of architectures for
high-complexity and low-overhead boson sampling experiments
Joint estimation of phase and phase diffusion for quantum metrology
Phase estimation, at the heart of many quantum metrology and communication
schemes, can be strongly affected by noise, whose amplitude may not be known,
or might be subject to drift. Here, we investigate the joint estimation of a
phase shift and the amplitude of phase diffusion, at the quantum limit. For
several relevant instances, this multiparameter estimation problem can be
effectively reshaped as a two-dimensional Hilbert space model, encompassing the
description of an interferometer phase probed with relevant quantum states --
split single-photons, coherent states or N00N states. For these cases, we
obtain a trade-off bound on the statistical variances for the joint estimation
of phase and phase diffusion, as well as optimum measurement schemes. We use
this bound to quantify the effectiveness of an actual experimental setup for
joint parameter estimation for polarimetry. We conclude by discussing the form
of the trade-off relations for more general states and measurements.Comment: Published in Nature Communications. Supplementary Information
available at
http://www.nature.com/ncomms/2014/140404/ncomms4532/extref/ncomms4532-s1.pd
- âŚ