A PRINCIPLE INVESTIGATION INTO THE FEASIBILITY OF USING MICROWAVE IMAGING TO MONITOR BONE HEALTH

INTRODUCTION Assessing bone health is of particular interest in age-associated disease and traumas such as osteoporosis, and fractures from extreme sports. Having tools that can safely and accurately assess bone health allows for the screening, diagnosis, and monitoring of disease or injury. The current gold standard for assessing bone health is high-resolution peripheral quantitative computed tomography (HR-pQCT) allowing direct three-dimensional (3D) visualization of bone. Recent evidence suggests microwave imaging can be a complementary medical imaging tool to HR-pQCT for dynamic assessment of full bone health [1]. Specifically, it was shown that microwave properties of cancellous bone are sensitive to physical changes in bone. However, this study was purely exploratory and provided no direct evidence for changes in dielectric properties with varying bone health. In this study, we aim to understand the interaction of electromagnetic waves with bone as a composite material, specifically the material anisotropy. Such information would be crucial to understanding how microwave measurements relate to the physical characteristics of the bone. METHODS Image data for the right and left tibia and radius of one female and two male subjects was acquired from HR-pQCT (XtremeCTII, Scanco Medical). The 3D image data was smoothed with a Gaussian filter (σ = 1.6) and segmented using histogram based segmentation. Cubes of edge length 82 voxels (5.002 mm) were extracted from the segmented images based on the bone center of geometry. The extracted cubes were imported into electromagnetic simulation software (SEMCAD X, Schmid & Partner Engineering AG). A parallel plate waveguide filled with air was excited with a Gaussian pulse polarized in the z-axis (f0 = 6.5 GHz, BW = 11 GHz). The bone and marrow were assigned material properties from literature [2]. Resulting data was exported and processed using custom MATLAB scripts (R2013a, MathWorks). Three simulations were performed per image such that the electromagnetic wave was polarized in each of the three anatomical directions: anterior-posterior, medial-lateral, and proximal-distal. RESULTS The effective permittivity, ε’r, was calculated for each of the anatomical directions and plotted across the frequency range of the input signal. A representative plot for all images is shown in Figure 1. The effective permittivity for each orientation tend to vary around a common permittivity.DISCUSSION AND CONCLUSIONS The results presented here provide a rudimentary but novel insight into the anisotropic behaviour of bone at microwave frequencies. Furthermore, it presents a technique for 3D model acquisition and simulation of bone not yet present in literature. This technique will allow further exploration of the electromagnetic properties of bone such as a deeper insight into the anisotropic behaviour and development of a model for the effective medium of bone as a composite material. With such information, the microwave measurements of bone could be directly related to the bone’s physical properties. This would prove the potential of microwaves to assess bone health for disease or trauma and allow the development of in vivo imaging tools for assessing disease and trauma

The Research on Public Participation in Local Legislation ——Take Xiamen as an Example

1997年，党的十五大提出依法治国、建设社会主义法治国家的基本方略；1999年，“依法治国”正式写入宪法，明确规定“中华人民共和国实行依法治国，建设社会主义法治国家”；2007年，党的十七大做出“全面落实依法治国基本方略，加快建设社会主义法治国家”的战略部署。民主是法治国家必备的政治基础，完善的民主是法治国家的重要标志，立法并不必然是符合所有人意志的决定，但却应该是所有人参与立法决策过程的结果。2007年9月到2009年6月，西北政法大学教授王周户就“公众参与”项目在陕西西安、宝鸡进行了问卷调查。982份调查问卷结果显示：绝大多数人(78%)认为公民应该参与人大立法和政府决策；77%的被调查者...In the year of 1997, the 15th CCP congress raised the basic strategy of manage the state according to the rule of law and develop socialism law-based government; In the year of 1999, “running the country according to law” was formally written into the constitution law, “The People’s Republic of China governs the country according to law and makes it socialist country ruled by law.” was clearly dec...学位：法律硕士院系专业：法学院法律系_法律硕士(JM)学号：X200812013

A study of planar anchor groups for graphene-based single-molecule electronics

To identify families of stable planar anchor groups for use in single molecule electronics, we report detailed results for the binding energies of two families of anthracene and pyrene derivatives adsorbed onto graphene. We find that all the selected derivatives functionalized with either electron donating or electron accepting substituents bind more strongly to graphene than the parent non-functionalized anthracene or pyrene. The binding energy is sensitive to the detailed atomic alignment of substituent groups over the graphene substrate leading to larger than expected binding energies for –OH and –CN derivatives. Furthermore, the ordering of the binding energies within the anthracene and pyrene series does not simply follow the electron affinities of the substituents. Energy barriers to rotation or displacement on the graphene surface are much lower than binding energies for adsorption and therefore at room temperature, although the molecules are bound to the graphene, they are almost free to move along the graphene surface. Binding energies can be increased by incorporating electrically inert side chains and are sensitive to the conformation of such chains

Vehicle Assembly Building Fire Mishap Investigation Report. Volume I of V

On January 13, 2005, at approximately 1355, smoke was noticed on the 4th floor of D Tower in the Vehicle Assembly Building (VAB). Subsequently, a 911 call was made, a fire alarm pull station was activated, and the VAB was evacuated. The source of the smoke was determined to be a fire on the Low Bay M/N section roof near the Launch Control Center (LCC) Crossover. Due to the high visibility of the mishap, the KSC Center Director appointed a Mishap Investigation Board. Damage to government property was limited to the roof and a small number of ceiling tiles that were damaged by the fire fighters during the response. At the time of the mishap, there were hazardous commodities in the VAB including Solid Rocket Motors (SRMs) with open grain due to Solid Rocket Booster (SRB) igniter inspections. The Board agrees with the SGS Fire Services' theory that large amounts of smoke concentrated in the VAB D Tower and moved downward into the cable tunnel. The Board determined the proximate cause of this incident to be torching. HRI was installing a torch applied roof membrane which resulted in the ignition of combustible materials under the membrane near a wooden roof expansion joint. The torch applied roofing method is a universally accepted safe industry practice when applied to non-combustible surfaces. The combination of an open flame torch and combustible materiaLs presents an increased level of risk even with skilled applicators. The addition of high winds to this combination results in a risk the Board thinks can not be adequately mitigated. An appropriate risk assessment and analysis must be performed on the proposed roofing method to be used on high visibility facilities which represent unique national assets even when using common industry practices for repair and modification. The Board identified three root causes which contributed to or created the proximate cause and, if eliminated or modified, would have prevented the mishap: 1. Combustible materials in existing roof system 2. Wind speed and direction 3. Inadequate fire watch technique. Two contributing factors were identified which may have contributed to the occurrence but, if eliminated or modified, would not have prevented the occurrence: 1. HRI rushed to dry in and seal the roof on January 13 because heavy rain was predicted for the next day 2. No guidance on torching in windy conditions A total of 17 significant observations were noted during this investigation, which could lead to another mishap, or increase the severity of a mishap, but were not contributing factors in this mishap