Advanced Water Purification System for In Situ Resource Utilization Project

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extratrrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtrtion material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removable technique. Our studies have show a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes

Entanglement and Collective Quantum Operations

We show how shared entanglement, together with classical communication and local quantum operations, can be used to perform an arbitrary collective quantum operation upon N spatially-separated qubits. A simple teleportation-based protocol for achieving this, which requires 2(N-1) ebits of shared, bipartite entanglement and 4(N-1) classical bits, is proposed. In terms of the total required entanglement, this protocol is shown to be optimal for even N in both the asymptotic limit and for `one-shot' applications

Massachusetts Clean Energy Center MetOcean Data Initiative

This data was collected by Kirincich as part of a metocean monitoring campaign designed around the observation of key atmospheric and ocean parameters at an existing offshore platform in the proximity of the Massachusetts and Rhode Island Wind Energy Areas. The campaign supported the purchase and installation of a LIDAR wind profiler, two cup anemometers and a wind direction vane at the MVCO Air-Sea Interaction Tower (ASIT). These instruments, chosen in consultation with AWS Truepower to adhere to Massachusetts Clean Energy Center (MassCEC)’s MetOcean Measurement Plan, were installed over the course of four day cruises to the MVCO tower between October and December 2016 and maintained to present.Massachusetts Clean Energy Technology Cente

Wiring Switches to Light Bulbs

Given n buttons and n bulbs so that the ith button toggles the ith bulb and at most two other bulbs, we compute the sharp lower bound on the number of bulbs that can be lit regardless of the action of the buttons.Comment: 19 pages, 14 figure

New Insights into the Charge-Transfer-to-Solvent Spectrum of Aqueous Iodide: Surface versus Bulk.

Liquid phase charge-transfer-to-solvent (CTTS) transitions are important, as they serve as photochemical routes to solvated electrons. In this work, broadband deep-ultraviolet electronic sum frequency generation (DUV-ESFG) and two-photon absorption (2PA) spectroscopic techniques were used to assign and compare the nature of the aqueous iodide CTTS excitations at the air/water interface and in bulk solution. In the one-photon absorption (1PA) spectrum, excitation to the 6s Rydberg-like orbital (5p → 6s) gives rise to a pair of spin-orbit split iodine states, 2P3/2 and 2P1/2. In the 2PA spectra, the lower-energy 2P3/2 peak is absent and the observed 2PA peak, which is ∼0.14 eV blue-shifted relative to the upper 2P1/2 CTTS peak seen in 1PA, arises from 5p → 6p electronic promotion. The band observed in the ESFG spectrum is attributed to mixing of excited states involving 5p → 6p and 5p → 6s promotions caused by both vibronic coupling and the external electric field generated by asymmetric interfacial solvation

Airborne bacterial populations above desert soils of the McMurdo Dry Valleys, Antarctica

Bacteria are assumed to disperse widely via aerosolized transport due to their small size and resilience. The question of microbial endemicity in isolated populations is directly related to the level of airborne exogenous inputs, yet this has proven hard to identify. The ice-free terrestrial ecosystem of Antarctica, a geographically and climatically isolated continent, was used to interrogate microbial bio-aerosols in relation to the surrounding ecology and climate. High-throughput sequencing of bacterial ribosomal RNA (rRNA) genes was combined with analyses of climate patterns during an austral summer. In general terms, the aerosols were dominated by Firmicutes, whereas surrounding soils supported Actinobacteria-dominated communities. The most abundant taxa were also common to aerosols from other continents, suggesting that a distinct bio-aerosol community is widely dispersed. No evidence for significant marine input to bio-aerosols was found at this maritime valley site, instead local influence was largely from nearby volcanic sources. Back trajectory analysis revealed transport of incoming regional air masses across the Antarctic Plateau, and this is envisaged as a strong selective force. It is postulated that local soil microbial dispersal occurs largely via stochastic mobilization of mineral soil particulates

Quantum State Separation, Unambiguous Discrimination and Exact Cloning

Unambiguous discrimination and exact cloning reduce the square-overlap between quantum states, exemplifying the more general type of procedure we term state separation. We obtain the maximum probability with which two equiprobable quantum states can be separated by an arbitrary degree, and find that the established bounds on the success probabilities for discrimination and cloning are special cases of this general bound. The latter also gives the maximum probability of successfully producing N exact copies of a quantum system whose state is chosen secretly from a known pair, given M initial realisations of the state, where N>M. We also discuss the relationship between this bound and that on unambiguous state discrimination.Comment: RevTeX, 5 pages postscrip

Undescended retropharyngeal parathyroid adenoma with adjacent thymic tissue in a 13-year-old boy with primary hyperparathyroidism.

We describe a rare presentation of a symptomatic parathyroid adenoma located in an ectopic retropharyngeal position in a 13-year-old boy. Preoperative CT scan and MRI demonstrated the ectopic location of the parathyroid adenoma. The patient underwent successful parathyroidectomy with cure of his hyperparathyroidism. On pathologic exam, the specimen was made up of a parathyroid adenoma and adjacent thymic tissue, indicating that it was likely an undescended lower parathyroid gland arising from the third pharyngeal pouch. Ectopic retropharyngeal parathyroid adenomas are very rare and to our knowledge, none have been previously described in adolescents

Young’s Modulus and Volume Porosity Relationships for Additive Manufacturing Applications

Recent advancements in additive manufacturing (or rapid prototyping) technologies allow the fabrication of end-use components with defined porous structures. For example, one area of particular interest is the potential to modify the flexibility (bending stiffness) of orthopedic implants through the use of engineered porosity (i.e., design and placement of pores) and subsequent fabrication of the implant using additive manufacturing processes. However, applications of engineered porosity require the ability to accurately predict mechanical properties from knowledge or characterization of the pore structure and the existence of robust equations characterizing the property–porosity relationships. As Young’s modulus can be altered by variations in pore shape as well as pore distribution, numerous semi-analytical and theoretical relationships have been proposed to describe the dependence of mechanical properties on porosity. However, the utility and physical meaning of many of these relationships is often unclear as most theoretical models are based on some idealized physical microstructure, and the resulting correlations often cannot be applied to real materials and practical applications. This review summarizes the evolution and development of relationships for the effective Young’s modulus of a porous material and concludes that verifiable equations yielding consistently reproducible results tied to specific pore structures do not yet exist. Further research is needed to develop and validate predictive equations for the effective Young’s modulus over a volume porosity range of 20–50 %, the range of interest over which existing equations, whether based on effective medium theories or empirical results, demonstrate the largest disparity and offers the greatest opportunity for beneficial modification of bending stiffness in orthopedic applications using currently available additive manufacturing techniques

Mismatch-based delayed thrombolysis: a meta-analysis

<p><b>Background and Purpose</b>: Clinical benefit from thrombolysis is reduced as stroke onset to treatment time increases. The use of "mismatch" imaging to identify patients for delayed treatment has face validity and has been used in case series and clinical trials. We undertook a meta-analysis of relevant trials to examine whether present evidence supports delayed thrombolysis among patients selected according to mismatch criteria.</p> <p><b>Methods</b>: We collated outcome data for patients who were enrolled after 3 hours of stroke onset in thrombolysis trials and had mismatch on pretreatment imaging. We selected the trials on the basis of a systematic search of the Web of Knowledge. We compared favorable outcome, reperfusion and/or recanalization, mortality, and symptomatic intracerebral hemorrhage between the thrombolyzed and nonthrombolyzed groups of patients and the probability of a favorable outcome among patients with successful reperfusion and clinical findings for 3 to 6 versus 6 to 9 hours from poststroke onset. Results are expressed as adjusted odds ratios (a-ORs) with 95% CIs. Heterogeneity was explored by test statistics for clinical heterogeneity, I2 (inconsistency), and L’Abbé plot.</p> <p><b>Results</b>: We identified articles describing the DIAS, DIAS II, DEDAS, DEFUSE, and EPITHET trials, giving a total of 502 mismatch patients thrombolyzed beyond 3 hours. The combined a-ORs for favorable outcomes were greater for patients who had successful reperfusion (a-OR=5.2; 95% CI, 3 to 9; I2=0%). Favorable clinical outcome was not significantly improved by thrombolysis (a-OR=1.3; 95% CI, 0.8 to 2.0; I2=20.9%). Odds for reperfusion/recanalization were increased among patients who received thrombolytic therapy (a-OR=3.0; 95% CI, 1.6 to 5.8; I2=25.7%). The combined data showed a significant increase in mortality after thrombolysis (a-OR=2.4; 95% CI, 1.2 to 4.9; I2=0%), but this was not confirmed when we excluded data from desmoteplase doses that were abandoned in clinical development (a-OR=1.6; 95% CI, 0.7 to 3.7; I2=0%). Symptomatic intracerebral hemorrhage was significantly increased after thrombolysis (a-OR=6.5; 95% CI, 1.2 to 35.4; I2=0%) but not significant after exclusion of abandoned doses of desmoteplase (a-OR=5.4; 95% CI, 0.9 to 31.8; I2=0%).</p> <p><b>Conclusions</b>: Delayed thrombolysis amongst patients selected according to mismatch imaging is associated with increased reperfusion/recanalization. Recanalization/reperfusion is associated with improved outcomes. However, delayed thrombolysis in mismatch patients was not confirmed to improve clinical outcome, although a useful clinical benefit remains possible. Thrombolysis carries a significant risk of symptomatic intracerebral hemorrhage and possibly increased mortality. Criteria to diagnose mismatch are still evolving. Validation of the mismatch selection paradigm is required with a phase III trial. Pending these results, delayed treatment, even according to mismatch selection, cannot be recommended as part of routine care.</p&gt