Phase control of a longitudinal momentum entangled photon state by a deformable membrane mirror

We propose a paradigmatic demonstration of the potentialities of a deformable mirror for closed-loop control of a two-photon momentum-entangled state, subject to phase fluctuations. A custom-made membrane mirror is used to set a relative phase shift between the arms of an interferometric apparatus. The control algorithm estimates the phase of the quantum state, by measurements of the coincidence events at the output ports of the interferometer, and uses the measurements results to provide a feedback signal to the deformable mirror. Stabilization of the coincidence rate to within 1.5 standard deviation of the Poissonian noise is demonstrated over 2000 seconds.Comment: RevTex, 6 page

Top management team influence on firms’ internationalization complexity

We study the relationship between firms' top management teams (TMT) and internationalization complexity. We consider the effect of three different sets of TMT characteristics – international business orientation intensity, education intensity, and team diversity – on three different and increasingly complex facets of internationalization - international markets intensity, international operations intensity and international country diversity. We argue that more international, highly-educated and diverse TMTs are better able to face the complexity derived from international competition. The results of our empirical analysis show that TMTs having foreign managers or managers with international experience are more likely to be in charge of firms facing higher international operations intensity. Conversely, more educated and more diverse TMTs are associated with complexity deriving from international diversification

Top management team influence on firms’ internationalization complexity

We study the relationship between firms' top management teams (TMT) and internationalization complexity. We consider the effect of three different sets of TMT characteristics – international business orientation intensity, education intensity, and team diversity – on three different and increasingly complex facets of internationalization - international markets intensity, international operations intensity and international country diversity. We argue that more international, highly-educated and diverse TMTs are better able to face the complexity derived from international competition. The results of our empirical analysis show that TMTs having foreign managers or managers with international experience are more likely to be in charge of firms facing higher international operations intensity. Conversely, more educated and more diverse TMTs are associated with complexity deriving from international diversification

A Case Report of a Solitary Fibrous Tumor of the Maxillary Sinus

A solitary fibrous tumor (SFT) is a benign neoplasm, firstly described as a mesenchymal tumor of the pleura. Its incidence range in the head and neck region is about 5\u201327%, but only rarely does it affect paranasal sinuses. The differential diagnosis is challenging, owing to its erosive growth pattern and immuno-histochemical features. SFTs have an aggressive behavior and an important recurrence potential. Therefore, a radical surgical excision is the gold standard therapeutic procedure. A rare SFT originating from the right maxillary sinus is reported here. The 37-year-old patient presented to the outpatient clinic with a painful expansive lesion in the whole right maxillary region. The overlying skin was inflamed and the patient had no epistaxis episodes. The 1.5 dentary element tested negative for vitality; however, a puncture of the lesion led to a hematic spill and no purulent discharge. An endoscopic-guided biopsy was suggestive either of SFT or hemangioperictoma, excluding a malignant neoplasm. A multi-equipe surgical team was activated. The lesion was embolized in order to achieve a good hemostatic control and, after 48 h, the neoplasm was radically excised with a combined open and endoscopic approach. The patient was disease-free at 12-month radiological and clinical follow-up. Given the rarity of this lesion and the delicacy required in addressing head and neck neoplasms, we believe that the present case report might be of help in further understanding how to approach cranio-facial SFTs

Qualitative versus automatic evaluation of CT perfusion parameters in acute posterior circulation ischaemic stroke

Purpose To compare the diagnostic accuracy (ACC) in the detection of acute posterior circulation strokes between qualitative evaluation of software-generated colour maps and automatic assessment of CT perfusion (CTP) parameters. Methods Were retrospectively collected 50 patients suspected of acute posterior circulation stroke who underwent to CTP (GE “Lightspeed”, 64 slices) within 24 h after symptom onset between January 2016 and December 2018. The Posterior circulation-Acute Stroke Prognosis Early CT Score (pc-ASPECTS) was used for quantifying the extent of ischaemic areas on non-contrast (NC)CT and colour-coded maps generated by CTP4 (GE) and RAPID (iSchemia View) software. Final pc-ASPECTS was calculated on follow-up NCCT and/or MRI (Philips Intera 3.0 T or Philips Achieva Ingenia 1.5 T). RAPID software also elaborated automatic quantitative mismatch maps. Results By qualitative evaluation of colour-coded maps, MTT-CTP4D and Tmax-RAPID showed the highest sensitivity (SE) (88.6% and 90.9%, respectively) and ACC (84% and 88%, respectively) compared with the other perfusion parameters (CBV, CBF). Baseline NCCT and CBF provided by RAPID quantitative perfusion mismatchmaps had the lowest SE (29.6%and 6.8%, respectively) and ACC (38% and 18%, respectively). CBF and Tmax assessment provided by quantitative RAPID perfusion mismatch maps showed significant lower SE and ACC than qualitative evaluation. No significant differences were found between the pc-ASPECTSs assessed on colour-coded MTT and Tmax maps neither between the scores assessed on colourcoded CBV-CTP4D and CBF-RAPID maps. Conclusion Qualitative analysis of colour-codedmaps resultedmore sensitive and accurate in the detection of ischaemic changes than automatic quantitative analysis

A Metallurgical Inspection Method to Assess the Damage in Performance-Limiting Nb3Sn Accelerator Magnet Coils

The design and production of Nb3Sn-based dipole and quadrupole magnets is critical for the realization of the High-Luminosity Large Hadron Collider (HL-LHC) at the European Organization for Nuclear Research (CERN). Nb3Sn superconducting coils are aimed at enhancing the bending and focusing strengths of accelerator magnets for HL-LHC and beyond. Due to the brittle nature of Nb3Sn, the coil fabrication steps are very challenging and require very careful QA/QC. Flaws in the Nb3Sn filaments may lead to quenches, and eventually, performance limitation below nominal during magnet testing. A novel inspection method, including advanced non-destructive and destructive techniques, was developed to explore the root-causes of quenches occurring in performance-limiting coils. The most relevant results obtained for MQXF coils through this innovative inspection method are presented. This approach allows for precise assessment of the physical events associated to the quenches experienced b y magnet coils, mainly occurring under the form of damaged strands with transversely broken sub-elements. Coil-slice preparation, micro-optical observations of transverse and longitudinal cross-sections, and a deep etching technique of copper will be illustrated in the present work, with a focus on the results achieved for a CERN coil from a non-conforming quadrupole magnet prototype, and two coils fabricated in the US, in the framework of the Accelerator Upgrade Project (AUP) collaboration, from two different non-conforming quadrupole magnets, respectively. The results obtained through the proposed inspection method will be illustrated.Comment: Applied Superconductivity Conference 202

Polarized X-ray absorption spectroscopy of the low-temperature photoproduct of carbonmonoxy-myoglobin

Visible light can break the Fe—CO bond in Fe(II) carbonmonoxy-myoglobin (MbCO) giving an unligated product (Mb*) that is almost stable at T < 30 K. Fe K-edge polarized X-ray absorption spectra (P-XAS) of the photoproduct (T = 20 K) of an oriented single crystal (0.2 × 0.2 × 0.3 mm) of sperm whale MbCO (space group P21) have been collected. By rotating the crystal the X-ray photon polarization vector has been oriented almost parallel (with an angle α = 23°) or perpendicular (α = 86°) to the heme normal of each myoglobin molecule. The crystal was continuously illuminated by a white-light source during the data collection. The polarized data give novel information on the Fe-heme electronic/structural rearrangement following photolysis. The XANES (X-ray absorption near-edge structure) spectrum polarized in the direction close to the Fe—CO bond changes dramatically after photolysis, exhibiting a shift of ∼2 eV, due to electronic relaxation of empty states of pz symmetry, while more subtle changes are observed in the spectrum polarized along the heme plane, sensitive to the heme-plane geometry. Changes in the pre-edge region can be interpreted to provide insight into the electronic structure of the highest occupied and lowest unoccupied molecular orbitals (HOMO–LUMO) in the MbCO → Mb* photochemical reaction at low temperature

Surface ruptures database related to the 26 December 2018, MW 4.9 Mt. Etna earthquake, southern Italy

We provide a database of the surface ruptures produced by the 26 December 2018 Mw 4.9 earthquake that struck the eastern flank of Mt. Etna volcano in Sicily (southern Italy). Despite its relatively small magnitude, this shallow earthquake caused about 8 km of surface faulting, along the trace of the NNW-trending active Fiandaca Fault. Detailed field surveys have been performed in the epicentral area to map the ruptures and to characterize their kinematics. The surface ruptures show a dominant right-oblique sense of displacement with an average slip of about 0.09 m and a maximum value of 0.35 m. We have parsed and organized all observations in a concise database, with 932 homogeneous georeferenced records. The Fiandaca Fault is part of the complex active Timpe faults system affecting the eastern flank of Etna, and its seismic history indicates a prominent surface-faulting potential. Therefore, this database is essential for unravelling the seismotectonics of shallow earthquakes in volcanic areas, and contributes updating empirical scaling regressions that relate magnitude and extent of surface faulting.Publishedid 422T. Deformazione crostale attivaJCR Journa

Surface ruptures following the 26 December 2018, Mw 4.9, Mt. Etna earthquake, Sicily (Italy)

We present a 1:10,000 scale map of the coseismic surface ruptures following the 26 December 2018 Mw 4.9 earthquake that struck the eastern flank of Mt. Etna volcano (southern Italy). Detailed rupture mapping is based on extensive field surveys in the epicentral region. Despite the small size of the event, we were able to document surface faulting for about 8 km along the trace of the NNW-trending active Fiandaca Fault, belonging to the Timpe tectonic system in the eastern flank of the volcano. The mapped ruptures are characterized in most cases by perceivable opening and by a dominant right-oblique sense of slip, with an average slip of about 0.09 m and a peak value of 0.35 m. It is also noteworthy that the ruptures vary significantly in their kinematic expression, denoting locally high degree of complexity of the surface faulting.Published831-8372T. Deformazione crostale attivaJCR Journa